Fitment Help

[EliteDriftProductions]

I wanna get 17x10 XXR 526 wheels for my hatch (4 lug) and the reason why is because its the only wheel I can find with a big lip that I like, I am just worried about the fitment..I asked a guy how they fit on his s13 since he was selling the exact setup I want, he just said I needed spacers (10-15mm) in the front to avoid the struts I think he was saying? (don't remember) anyways that's all he said I would need and should be fine. But I would imagine there's more too that then just some front spacer like rolling the fenders etc. I plan on saving for some PBM coils or Megans not sure yet heard great things about both, but anyways if any of you "fitment whores" know what to do or can help me id appreciate it thanks! :2f2f:

[S13CoupeLover]

know offset of the rim?

[S13CoupeLover]

can't find 526's in 17x10 in 4 lug only 5.

[EliteDriftProductions]

can't find 526's in 17x10 in 4 lug only 5.

you look on ebay? and there a +20 offset.

http://http://www.ebay.com/itm/XXR-526-17-17x10-4x100-4x114-3-20-CHROMIUM-BLACK-WHEELS-RIMS-S13-240SX-/330902534634?pt=Motors_Car_Truck_Parts_Accessories&hash=item4d0b53f9ea&vxp=mtr

[EliteDriftProductions]

XXR 526 17 17x10 4x100 4x114 3 20 Chromium Black Wheels Rims s13 240sx | eBay (http://www.ebay.com/itm/XXR-526-17-17x10-4x100-4x114-3-20-CHROMIUM-BLACK-WHEELS-RIMS-S13-240SX-/330902534634?pt=Motors_Car_Truck_Parts_Accessories&hash=item4d0b53f9ea&vxp=mtr)

[trxrx7]

there is a thread about fitment on here, but rolling fenders will be a must and coils probably too if you are planning on running 10" in the front you will need some camber unless you like the poke look!

[EliteDriftProductions]

I know I cant seem to find the thread so I figured the s-chassis would be my best bet. ok cool thanks, figured I would need to roll fenders and some coils too. I plan on getting a few degrees of - camber for drifting and it looks cool. But yea I just wanna know if its possible aha.

[S13CoupeLover]

10j +20, you'll need a roll maybe a little pull and you should be fine.

Also this should have been put into the small questions thread.

[ultimateirving]

OP. have you seen the Square Rims?
My buddy just put a set on his 13hatch and it looks great.
They fit well and he doesnt have coilovers(yet) or rolled fenders.
Let me see if i can find a pic



Here ya go,

http://i1074.photobucket.com/albums/w415/majorwood76/5BE9A2D7-02A5-42FE-92BF-3C537134C88E-10088-0000055661C128EB.jpg

http://i1074.photobucket.com/albums/w415/majorwood76/46B31213-21F9-48C4-B917-FE2D928B9857-12600-0000066F30943314.jpg

[The Dude]

http://zilvia.net/f/chat/129865-wheel-fitment-whore-thread-stretch-flush-no-specs-no-post.html

Go to this thread and search for xxr 526.

[EliteDriftProductions]

OP. have you seen the Square Rims?
My buddy just put a set on his 13hatch and it looks great.
They fit well and he doesnt have coilovers(yet) or rolled fenders.
Let me see if i can find a pic



Here ya go,

http://i1074.photobucket.com/albums/w415/majorwood76/5BE9A2D7-02A5-42FE-92BF-3C537134C88E-10088-0000055661C128EB.jpg

http://i1074.photobucket.com/albums/w415/majorwood76/46B31213-21F9-48C4-B917-FE2D928B9857-12600-0000066F30943314.jpg

These are the 17x10 526s? n no coils!? wow they look like they fit great haha thanks for the pictures it really helped

[theStig880]

Pretty much what everyone else has said. Coilovers, roll the fenders, and camber up front to fit the 10s. Depending on how low you decide to go, you will also need to tuck the wiring harness up front and bang out the wheel wells with a hammer. Also a mild stretched tire, 225 or 235 ish, would help on clearance. And if your debating between pbms or megans, get the pbms. There so much nicer overall imo.

[zerodameaon]

I know I cant seem to find the thread so I figured the s-chassis would be my best bet. ok cool thanks, figured I would need to roll fenders and some coils too. I plan on getting a few degrees of - camber for drifting and it looks cool. But yea I just wanna know if its possible aha.

You did not search too hard. "Fitment question" netted me this as first result.
http://zilvia.net/f/chat/392494-wheel-fitment-question-thread.html