SR20DET Parts! 62 Pictures! Must LOOK!

[s13 drifta]

Hi, I am listing some of my sr20det parts that I no longer need. If you see anything you are interested in please post or send me a PM. Prices do not include shipping, please leave zip code for quote. I accept paypal and ship fast.


OEM head bolts w/ washers-$20
http://imageshack.us/a/img571/2821/sr20detparts028.jpg

S13 cams-$70 for pair
S13 cam gears-$30 for pair
http://imageshack.us/a/img714/7574/020uqk.jpg

Oil feed tubes-$30 for pair
http://img837.imageshack.us/img837/1949/022ok.jpg

Rocker arms-$80 for set of 8
http://imageshack.us/a/img685/6640/227md.jpg

S13 blacktop valve cover w/ T and PCV valve-$70
http://imageshack.us/a/img705/6739/sr20detparts003.jpg

Valve cover T-$5
http://imageshack.us/a/img838/8729/sr20detparts032.jpg

OEM oil cap-$10
http://imageshack.us/a/img5/6572/sr20detparts005.jpg

OEM timing cover / oil pump-$80
http://imageshack.us/a/img198/7158/sr20detparts001.jpg

Timing chain tensioner-$30
http://imageshack.us/a/img594/6937/sr20parts034.jpg

Crank / oil pump collar-$10
Crank pulley bolt w/ washer-$10
Lower timing chain gear-$10
http://imageshack.us/a/img844/4458/sr20detparts034.jpg

S13 pulleys
P/S pulley-SOLD
Water pump pulley-$10
Alt. pulley-$10
http://imageshack.us/a/img713/7556/sr20detparts035.jpg

Thermostat housing-$20
http://imageshack.us/a/img825/2519/004ju.jpg

Temp sensor housing-$20
http://imageshack.us/a/img689/7564/002qlun.jpg

Temp sensor harness-$20
http://imageshack.us/a/img542/4305/sr20detparts017.jpg

Water outlet-$30
http://imageshack.us/a/img39/6253/016jb.jpg

Water inlet-$20
http://imageshack.us/a/img707/636/003gdh.jpg

S13 intake manifold-$40
http://imageshack.us/a/img832/8123/004nsh.jpg

Intake manifold brackets-$20 for all 3
http://imageshack.us/a/img585/4889/017ur.jpg

PCV valve to intake lines-$20
http://imageshack.us/a/img198/4153/sr20detparts018.jpg

Coolant lines under intake manifold-$30
http://imageshack.us/a/img17/7504/sr20parts049.jpg

S13 throttle body w/ auto TPS-$60
http://imageshack.us/a/img802/2788/005te.jpg

Auto TPS-$30
http://imageshack.us/a/img687/5779/sr20detparts014.jpg

S13 fuel rail-$30
http://imageshack.us/a/img607/4201/sr20detparts037.jpg

FPR-$15
http://imageshack.us/a/img600/2258/014wxg.jpg

Mishimoto radiator cap-$15
http://imageshack.us/a/img855/38/sr20detparts022.jpg

S13 SR MAF- SOLD
http://imageshack.us/a/img35/7471/sr20detparts020.jpg

Q45 MAF-$50
http://imageshack.us/a/img402/8794/007wvx.jpg

OEM exhaust manifold-$40
http://imageshack.us/a/img52/6783/sr20parts020.jpg

Blacktop rods-$80 for all 4
http://imageshack.us/a/img811/6783/sr20parts020.jpg

Crank girdle-$40
http://imageshack.us/a/img845/3751/sr20detparts025.jpg

Main bolts w/ washers-$20
http://imageshack.us/a/img209/6623/sr20detparts026.jpg

Crank girdle baffle-SOLD
http://imageshack.us/a/img132/7057/sr20detparts027.jpg

Oil pickup / strainer-$25
http://imageshack.us/a/img191/417/002fye.jpg

Lower oil pan (some scratches and small dents)-SOLD
http://imageshack.us/a/img823/7664/sr20detparts029.jpg

Oil sending unit-$15
http://imageshack.us/a/img27/601/sr20detparts024.jpg

Oil dip stick w/ housing-$25
http://imageshack.us/a/img594/6633/sr20detparts015.jpg

Dip stick housing-$10
http://imageshack.us/a/img31/2764/sr20parts046.jpg

Knock sensor harness-$20
http://imageshack.us/a/img94/7347/sr20detparts016.jpg

Rear seal housing w/ seal (one tab broke)-$20
http://imageshack.us/a/img811/3140/sr20detparts010.jpg

SR engine flex plate-$40
http://imageshack.us/a/img5/9761/0113r.jpg

SR OEM flywheel (resurfaced then used for 5k miles)-$50
http://imageshack.us/a/img4/8348/0023hl.jpg

SR flywheel bolts-$20 for all 8
http://imageshack.us/a/img339/9555/sr20detparts030.jpg

Exedy stage 1 clutch-$90
http://imageshack.us/a/img266/8482/001pen.jpg

Throwout bearing sleeve-$10
http://imageshack.us/a/img801/6954/sr20detparts031.jpg

SR 5 speed transmission-$280
http://imageshack.us/a/img193/3918/020ij.jpg

S13 complete manual driveshaft non abs-$120
http://imageshack.us/a/img577/3922/sr20detparts006.jpg

SR / KA engine brackets-$40 for pair
http://imageshack.us/a/img713/6458/014iqs.jpg

Skyline engine mounts (240sx upgrade, solid rubber)-$120
http://imageshack.us/a/img600/2118/003uco.jpg

J4 type x blacktop engine harness (complete and uncut)-$190
http://imageshack.us/a/img51/1895/007iu.jpg

J4 type x Intec tuned ecu with switchable tune (up boost, modified fuel and timing, no fuel cut, all bolt ons)-$200
http://imageshack.us/a/img831/1589/008vch.jpg

[s13 drifta]

Ignitor chip-$70
http://imageshack.us/a/img826/9008/006loo.jpg

Coil pack harness-$30
http://img801.imageshack.us/img801/9373/004sxp.jpg

T28 wastegate-SOLD
http://imageshack.us/a/img600/5975/sr20parts010.jpg

T28/GT28 bottom mount turbo line kit (steel braided water lines, hard oil line, AN fittings, banjo bolts, and washers)-$60
http://imageshack.us/a/img189/3967/sr20detparts011.jpg

T25 water inlet line-$10
T25 oil feed line-$10
Water line banjo bolts-$5 each
http://imageshack.us/a/img10/213/sr20detparts038.jpg

DIF Goodridge T2 bottom mount return line-$40
http://img18.imageshack.us/img18/3470/sr20detparts009.jpg

T2 3 bolt compressor outlet-SOLD
T2 HKS 2 bolt compressor inlet-$30
http://imageshack.us/a/img715/8446/sr20detparts023.jpg

SR CAS (chipped plug, harness still plugs in)-SOLD
http://imageshack.us/a/img14/6971/082gj.jpg

Steel cold pipe (looks like Greddy-$50
http://imageshack.us/a/img543/6017/001bgyv.jpg

Vortech FMU 12:1-$80
http://imageshack.us/a/img824/7378/011eyh.jpg

Billet BOV w/ pipe-$40
http://imageshack.us/a/img809/5965/004xur.jpg

28x6.5x2.5 FMIC (little tweaked, still works good)-$30
http://imageshack.us/a/img856/9062/014ko.jpg

Autometer fuel pressure gauge w/ steel braided line-$30
http://imageshack.us/a/img560/7986/sr20detparts012.jpg

http://imageshack.us/a/img801/3686/sr20detparts013.jpg

Thanks for looking!

[s13 drifta]

First bump...

[Flatline1121]

bump. still have that oil pump?

[s13 drifta]

bump. still have that oil pump?

Yes, shipping will be $15. Let me know if you want to buy it.

[Superluminal]

I PMed you.

[s13 drifta]

Last bump, lots of parts left.

[pzlrsd]

i need the intake cam sprocket water pump pulley studs and rear main seal bolts please shipped to 91950.

[SD_Kouki]

This is the cleanest FS thread I've seen. Bump for that!

[s13 drifta]

i need the intake cam sprocket water pump pulley studs and rear main seal bolts please shipped to 91950.

I have the intake cam gear, don't have the water pump studs.

This is the cleanest FS thread I've seen. Bump for that!

Thanks man!

[MYDAILYROUTINE]

Pm sent to you.