stamps31757
04-07-2013, 12:48 AM
Some of you may remember and some of you may not. My previous thread was closed down saying that I would never finish this. Listed below is my previous build.
http://zilvia.net/f/chat/449299-stamps-s13-build.html
This is the main reason I'm not a fan of zilvia. But i am trying to get past that.
Here is from start to current of where my build is at. If this one gets closed I will not be returning here to do anymore. Thank you for all that do support me and my build.
I think this is one of the pictures of where i left off
http://i687.photobucket.com/albums/vv232/powersubysti/2012-04-28_16-54-09_78.jpg
The KA getting ready to be removed from the car.
http://i687.photobucket.com/albums/vv232/powersubysti/100_0862_zps707ab566.jpg
No more KA.
http://i687.photobucket.com/albums/vv232/powersubysti/100_0868_zps83e3d08b.jpg
Removing the battery tray and welding up some holes.
http://i687.photobucket.com/albums/vv232/powersubysti/100_0870_zpsc817215b.jpg
The RB sitting in the car.
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130112_221536_512.jpg
Most of the parts soft mounted so i can turn the car in for some welding.
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130120_150518_559.jpg
Daughter working on her car. (Had to throw this in)
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130121_092643_967.jpg
Car all ready for welding.
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130209_205814_229.jpg
After I got the car back from having the downpipe, intercooler piping and both waste gate pipings all done up.
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130303_164826_571.jpg
Intake manifold finally mounted the way it should be.
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130309_180456_894.jpg
The picture looks lopsided because the jack stands were uneven but oil cooler and intercooler mounted up. I need to add more onto my bumper beam to strengthen it.
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130309_180515_602.jpg
How the car sits tonight
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130406_222132_618.jpg
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130406_222153_371.jpg
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130406_222810_149.jpg
The only parts I need left is all fluids, some of the vacuum hoses, and a 300zx maf sensor. The walbro 400 fuel pump, nismo injectors, greddy gauges, powerfc, flex-a-lite fans, and many other parts have all been installed. Just need the little things. Hoping to get it started within the next month. Thank you for following.
http://zilvia.net/f/chat/449299-stamps-s13-build.html
This is the main reason I'm not a fan of zilvia. But i am trying to get past that.
Here is from start to current of where my build is at. If this one gets closed I will not be returning here to do anymore. Thank you for all that do support me and my build.
I think this is one of the pictures of where i left off
http://i687.photobucket.com/albums/vv232/powersubysti/2012-04-28_16-54-09_78.jpg
The KA getting ready to be removed from the car.
http://i687.photobucket.com/albums/vv232/powersubysti/100_0862_zps707ab566.jpg
No more KA.
http://i687.photobucket.com/albums/vv232/powersubysti/100_0868_zps83e3d08b.jpg
Removing the battery tray and welding up some holes.
http://i687.photobucket.com/albums/vv232/powersubysti/100_0870_zpsc817215b.jpg
The RB sitting in the car.
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130112_221536_512.jpg
Most of the parts soft mounted so i can turn the car in for some welding.
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130120_150518_559.jpg
Daughter working on her car. (Had to throw this in)
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130121_092643_967.jpg
Car all ready for welding.
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130209_205814_229.jpg
After I got the car back from having the downpipe, intercooler piping and both waste gate pipings all done up.
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130303_164826_571.jpg
Intake manifold finally mounted the way it should be.
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130309_180456_894.jpg
The picture looks lopsided because the jack stands were uneven but oil cooler and intercooler mounted up. I need to add more onto my bumper beam to strengthen it.
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130309_180515_602.jpg
How the car sits tonight
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130406_222132_618.jpg
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130406_222153_371.jpg
http://i687.photobucket.com/albums/vv232/powersubysti/IMG_20130406_222810_149.jpg
The only parts I need left is all fluids, some of the vacuum hoses, and a 300zx maf sensor. The walbro 400 fuel pump, nismo injectors, greddy gauges, powerfc, flex-a-lite fans, and many other parts have all been installed. Just need the little things. Hoping to get it started within the next month. Thank you for following.