NJ3ndri
04-06-2013, 03:35 PM
For sale:
Ka24de excessive intake manifold (top mount)
Upgraded 90m throttlebody flange. With q45 throttlebody.
The two piece manifold is welded shut (Plenum to runners) so no chance of leakage . Work done at Carl Stevens JR @ XRC in Patterson NJ
Manifold is ported /gasket matched
Also have a AMS top feed fuel rail 14mm O Ring size.
Photos are before the bigger flange was added and plenum was welded to the runners.
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/541760_10151329142759016_376505147_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/481860_10151290425944016_1767776432_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/312789_10151291511549016_2044523148_n.jpg
manifold runs about $500 bucks itself, Throttlebody $120.00 + $400.00 labor in customization = $1,020
Taking $800.00 OR BEST OFFER
https://sphotos-a.xx.fbcdn.net/hphotos-snc7/395502_10151347991494016_2082745440_n.jpg
s13 RS-Enthalpy tuned ECU.
SPEC TUNED FOR:
93 / e85 Dual tune.
850cc injectors
272 cams
built bottom end.
stock bore/forged pistons.
precision sc61
Can be used with similar setup close to the one described
Just the ECU is for sale.
$400 OR BEST OFFER.
Text for more info 201 403 8547 Andre
Ka24de excessive intake manifold (top mount)
Upgraded 90m throttlebody flange. With q45 throttlebody.
The two piece manifold is welded shut (Plenum to runners) so no chance of leakage . Work done at Carl Stevens JR @ XRC in Patterson NJ
Manifold is ported /gasket matched
Also have a AMS top feed fuel rail 14mm O Ring size.
Photos are before the bigger flange was added and plenum was welded to the runners.
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/541760_10151329142759016_376505147_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/481860_10151290425944016_1767776432_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/312789_10151291511549016_2044523148_n.jpg
manifold runs about $500 bucks itself, Throttlebody $120.00 + $400.00 labor in customization = $1,020
Taking $800.00 OR BEST OFFER
https://sphotos-a.xx.fbcdn.net/hphotos-snc7/395502_10151347991494016_2082745440_n.jpg
s13 RS-Enthalpy tuned ECU.
SPEC TUNED FOR:
93 / e85 Dual tune.
850cc injectors
272 cams
built bottom end.
stock bore/forged pistons.
precision sc61
Can be used with similar setup close to the one described
Just the ECU is for sale.
$400 OR BEST OFFER.
Text for more info 201 403 8547 Andre