greddy profec not turning up boost

[mr2gons14]

Ok so I have a gt2871r .86 and I have an enthalpy tune to run 18 lbs but with the bc turned to 80-100% I only get 10 lbs lol anyone run into this problem? Im thinking wastegate cuz if i turn off the bc i run 8... any insite would be awesome thanks guys

[ultimateirving]

Nathan buddy. You either have it have it hooked up wrong or something. I'll be back in Phoenix Monday if u wanna get together I can take a look

[mr2gons14]

U gonna be at ifo man I'm driving there now lol

[nickauger]

take a look on the rear of your controller it should be like the first http://www.mkiv.com/techarticles/greddy_profec_b/08.jpg

[mr2gons14]

Nope that's how its set up I have vacuum lines on the hot pipe and wastegate that's right as well correct

[codyace]

Check for vacuum leaks.

[mr2gons14]

I have a small one somewhere but my vac is sitting at 17 would that effect it that much

[mr2gons14]

so noticed the wires in the solenoid were frayed and touching lol that may have been my problem. Found that the same time I found an awesome crack in my coolant res haha

[ultimateirving]

Well im back in town if you need any help, Also what do you mean by the sig? how does the 2871r compare to the ISIS turbo?

[s14boy]

if its still not working after you fix thos wires check the solenoid to see that it is working correctly also what is the set psi for your wastegate? 8-10 about?

-Mike

[imcunner]

I have a extra solenoid if thats hour problem

[mr2gons14]

i havent driven yet like i said i was sittin there with plastiweld and duck tape last night doin a ghetto fix but yea wastegate set for about 8.5 let yall know how it goes today

[mr2gons14]

btw nick the 2871 .86 spools about the same as the 3871 but is better lol