PDA

View Full Version : MI TS2BD OS Giken Twin Plate Push Type Clutch For RB ENGINES.

andy107
04-06-2013, 10:29 AM
I've been getting a lot of questions about this item so I made a separate posting. Up for sale is a twin plate OS Giken clutch and flywheel. It came off an older model R32 (RB26) with the PUSH TYPE clutch set up. According to the OS Giken website, its the same clutch for the following models:

Skyline R32 R33 GTR BNR32 BCNR33 RB26DETT

Skyline R31 R32 R33 RB25DET RB20

It's the B-D Series (204mm diameter plates - Spring damper "less harsh")

The setup is like new, flywheel and the clutch surfaces are mint including the pads. "Other clutches you see severe heat check marks on flywheel." Comes with proper Release Bearing!

NO CRACKS ON THE CLUTCH FRICTION MATERIAL OR ANY STRESS MARKS OR CRACKS ON FLYWHEEL OR CLUTCH DISK ITSELF. PRESSURE PLATE FINGERS ARE ALL LEVEL AND NOT BENT. THIS IS THE BEST CONDITION USED CLUTCH I'VE EVER CAME ACROSS.

On OS Ginken's site this setup is recommended for engines with large single turbo applications. Clutch should handle 600 hp and is completely rebuildable.

SOLD!!!.

New thickness for clutch is 4mm. Metal to metal is 2mm. Measurement is provided using a good quality Snap-On 0-1 micrometer. INFO from : http://www.gtrpwr.com/showthread.php?t=186

THIS CLUTCH HAS A LITTLE UNDER 75% LIFE LEFT. 25% WAS ONLY USED. THIS CLUTCH IS ABOUT $1800+ NEW. IF IT WAS ONLY USED BY 25%, I COULD REMOVE 1/4 OF THE PRICE AND IT WOULD COME UP TO $1350! IM ONLY ASKING $900, ITS A STEAL.


Disk #1 measured all 4 sides of clutch disk. 3.3mm was the average.
http://i205.photobucket.com/albums/bb177/andy_107/image.jpeg

Disk #2 measured all 4 sides of clutch disk. 3.4mm was the average.
http://i205.photobucket.com/albums/bb177/andy_107/image1.jpeg

http://i205.photobucket.com/albums/bb177/andy_107/Stuff%20for%20Sale/IMG_2482.jpg
http://i205.photobucket.com/albums/bb177/andy_107/Stuff%20for%20Sale/IMG_2481.jpg
http://i205.photobucket.com/albums/bb177/andy_107/Stuff%20for%20Sale/IMG_2480.jpg
http://i205.photobucket.com/albums/bb177/andy_107/Stuff%20for%20Sale/IMG_2479.jpg
http://i205.photobucket.com/albums/bb177/andy_107/Stuff%20for%20Sale/IMG_2477.jpg
http://i205.photobucket.com/albums/bb177/andy_107/Stuff%20for%20Sale/IMG_2475.jpg
http://i205.photobucket.com/albums/bb177/andy_107/Stuff%20for%20Sale/IMG_2474.jpg
http://i205.photobucket.com/albums/bb177/andy_107/Stuff%20for%20Sale/IMG_2473.jpg
http://i205.photobucket.com/albums/bb177/andy_107/Stuff%20for%20Sale/IMG_2472.jpg
ILoveJDM
04-06-2013, 12:42 PM
have this for my sr22, one of the best clutches you can buy.

bump for you
andy107
04-06-2013, 01:12 PM
have this for my sr22, one of the best clutches you can buy.

bump for you


Thanks man! I appreciate the recommendation!
BossHogg
04-06-2013, 01:18 PM
damn it, I am in the market for this exact clutch lol. Hmmmmmmmmmmmmmmmmmmm
BlewByYou
04-06-2013, 02:45 PM
Can you measure the disc thickness. Looking by pics there worn o_O
andy107
04-06-2013, 03:36 PM
Can you measure the disc thickness. Looking by pics there worn o_O

OS Giken Clutch FAQ and Information - GTRPWR Forums (http://www.gtrpwr.com/showthread.php?t=186)

Posting pics right now!
ch1873857
04-07-2013, 10:14 AM
Can you measure the disc thickness. Looking by pics there worn o_O

this clutch actually has a ton of life left. i bought one last year with less life and ive been drifting on it ever since. they are designed without rivets so you can run them down to the metal. if you want a clutch that you can redline clutch kick 3rd gear. this is your clutch
andy107
04-07-2013, 12:43 PM
this clutch actually has a ton of life left. i bought one last year with less life and ive been drifting on it ever since. they are designed without rivets so you can run them down to the metal. if you want a clutch that you can redline clutch kick 3rd gear. this is your clutch

Thanks man! I didn't know anyone on here had any experience with this clutch. But this is surly great info from a personal stand point. Much appreciated bro!
andy107
04-12-2013, 12:46 PM
Clutch still available! Bump!
andy107
04-28-2013, 01:35 PM
Bi Weekly Bump! Parts still available!
andy107
05-10-2013, 02:21 PM
Still for sale :)
speedracer1610
05-12-2013, 11:19 AM
Where are you located? i am interested.
andy107
05-12-2013, 12:13 PM
Where are you located? i am interested.

sent ya pm!
andy107
05-31-2013, 06:47 PM
Still available for sale!
andy107
06-08-2013, 10:34 AM
Still for sale! Your getting a Twin plate clutch for the price of a Single Plate! Plenty of life still left in this clutch!!!
andy107
06-16-2013, 07:20 PM
Bump. Still for sale. I may have a complete push to pull conversion if anyone needs it.
andy107
07-06-2013, 12:24 PM
another weekly bump.
THeokaYsLider
07-11-2013, 02:13 PM
We're are u located text me 3237103271
andy107
07-11-2013, 04:13 PM
We're are u located text me 3237103271

sent ya pm