PDA

View Full Version : FL RB25DET Engine complete, Local Pickup FLORIDA

Kingtal0n
04-05-2013, 05:49 PM
My father originally had this installed in his 1995 240sx. It has low compression on two cylinders, I am 99% sure it needs new pistons rings. I have a set of pistons/rings to go inside, I just dont have the time to open it up and do the job right. It does not require machine work. You can literally open up the engine, buy a set of gaskets and replace the pistons with my new OEM pistons I will include and put it back together.

I should have the MAF and ECU to go with it, and some plumbing.
The intake manifold was cut, welded, and polished, to accept the front mount intercooler plumbing. That cost $450.
the valvecovers are also polished, that cost $150


Asking $1200 for everything OBO.




http://i23.photobucket.com/albums/b378/draglarry/rb25_lowcompression/RB251.jpg

http://i23.photobucket.com/albums/b378/draglarry/rb25_lowcompression/rb253.jpg

http://i23.photobucket.com/albums/b378/draglarry/rb25_lowcompression/rb254.jpg

http://i23.photobucket.com/albums/b378/draglarry/rb25_lowcompression/rb255.jpg

http://i23.photobucket.com/albums/b378/draglarry/rb25_lowcompression/rb256.jpg

http://i23.photobucket.com/albums/b378/draglarry/rb25_lowcompression/rb257.jpg

Also looking to trade for somethings of similar value. I would take spare SR20DET parts, like a CAS, igniter, ecu, wiring, transmission, vlsd, body panels, etc... add it all up to $1200 and we trade.
Kingtal0n
04-17-2013, 09:54 PM
Looking to get rid of this RB25. Will part out the intake/valve covers if interested.
Kingtal0n
09-13-2013, 08:36 PM
Still for sale. its been all nice and oiled up "pickled" so to speak, lubricated even insides the combustion chambers for long term storage.
CharCharXD
09-16-2013, 07:14 PM
do you have the wiring for this?
Kingtal0n
09-17-2013, 03:10 PM
No, but I have the ECU and maf. I sold the wiring a few months ago. It was wired for an S14 1995 240sx so very specific.

I am looking to part out
Kingtal0n
03-12-2014, 10:59 PM
I still have the engine but I am no longer sure where the ECU/MAF is, or the replacement pistons.


local pickup please

I am looking to part out
Snatch'D Factory
03-13-2014, 07:32 AM
How much for just the short block & transmission?
mewantkouki
03-13-2014, 08:10 AM
Any way you can get this to Orlando? lol