rb25 obd port wiring help

[madmax89]

wiring speciltis harness. i have the 14 pin obd port all wierd up exp the" IGN"wire
..im confused because the IGN wire is black with red stripe like a ground wire..is this the right wire? its pin #45 on r33 pinout...all the other wires "RX"TX"CLK" ALL PIN RIGHT IN FROM ANOTHER DASH PORT FOR DULE CAM ,THE :IGN" WIRE GOSE INTO THE LOOM AND INTO THE ENGINE BAY ...I HOPE YOU CAN UNDERSTAND ME YOUR HELP IS APPRECIATED..

[2.5T_/<ouki]

Not sure if this will be of any help.

http://nistune.com/docs/Installation_and_Communication_Diagnostics.pdf

[madmax89]

yes thats nice thanxs agin for that pdf.lol.ok so IGN is just 12 volt power ..so sould i T into the IGN wire #45 or is ther a nother opion? the pdf is not clear

[2.5T_/<ouki]

yes thats nice thanxs agin for that pdf.lol.ok so IGN is just 12 volt power ..so sould i T into the IGN wire #45 or is ther a nother opion? the pdf is not clear

PDF says pin 49/59 = 12v ignition