Upgrading my fuel pressure regulator; what do I need?

[FourtyKid]

Looking to upgrade to an Aeromotive A1000 (http://autoplicity.com/products/2513929-aeromotive_13101_afs_a1000_injected_bypass_regulat or.aspx) fuel pressure regulator. Wondering what parts I will need for the complete install. Can I use rubber lines or do I need all new braided/stainless lines?


FPR (http://autoplicity.com/products/2513929-aeromotive_13101_afs_a1000_injected_bypass_regulat or.aspx)
Fittings (http://autoplicity.com/products/2514012-aeromotive_15609_afs_tapered_flare_fitting_10an_to _6an.aspx)
Braided Lines?
Anything else?


Thanks in advance.


P.S. if you're interested in buying the old FPR, PM me. :)

[s14boy]

you can use rubber lines just buy the correct hose barbs an clamps.

-Mike

[milto0n]

^What he said. You don't have to over-complicate it. Grab a couple of feet of universal FUEL line from your local auto store, mount the FPR somewhere, and use a little imagination. Just make sure your return and feed lines are correct and that you have a gauge (if you have an adjustable pressure regulated(recommended even if it isn't adjustable!)) to correctly set the fuel pressure. Hope this helps!