Built Bottom End KA24DE-T

[slmdstnc]

What's up guys, up for sale I've got a freshly rebuilt built bottom end KA24DE-T. With the purchase of the motor, I will include all receipts and all remaining oem parts(Pistons, Rods, Front Cover). I built the motor last fall and have decided to go a different route. The motor has yet to see a single speck of fuel! A.) Sr20 B.) LS X. Trades welcome! As many of you know builds aren't cheap, so my asking price is set at $3200;I am willing to negotiate, and by all means share your two cents.
On to the specs:

KA24DE-T
● Decked and honed
● Wiseco 9.0.1. Pistons
● Eagle forged rods
● Arp head studs
● Arp main studs
● Clevite rod and main bearings
● Cometic hg
● Head hot tanked and cleaned
● Valve stem seals redone
● Hx35 16mm
● Log manifold with v*band
● Down pipe
● Unknown large FMIC
● Beercan style fuel rail(top feed)
● Precision Turbo 740cc injectors
● Oem front cover with oil pump
● Oem main seal
● Act 6 puck w/ hd pressure plate
● F1 chromoly flywheel
● Act flywheel bolts

I also have a stock trans with all syncros still in tact, no grinds. Talk to me, I can also include harness, etc....

http://farm9.staticflickr.com/8398/8616159435_c0d6acf6ab.jpg (http://www.flickr.com/photos/[email protected]/8616159435/)
IMG_0157 (http://www.flickr.com/photos/[email protected]/8616159435/) by Slmdstnc (http://www.flickr.com/people/[email protected]/), on Flickr

http://farm9.staticflickr.com/8102/8616160597_c029f7441a.jpg (http://www.flickr.com/photos/[email protected]/8616160597/)
IMG_0146 (http://www.flickr.com/photos/[email protected]/8616160597/) by Slmdstnc (http://www.flickr.com/people/[email protected]/), on Flickr

http://farm9.staticflickr.com/8384/8616158931_ec3a7e5c89.jpg (http://www.flickr.com/photos/[email protected]/8616158931/)
IMG_0159 (http://www.flickr.com/photos/[email protected]/8616158931/) by Slmdstnc (http://www.flickr.com/people/[email protected]/), on Flickr

[sytfu_S14]

how much for just the longblock and.fuel rail?

[slmdstnc]

As of right now I'm trying to just get rid of everything as a whole, or hopefully a trade.

[findmea240]

I have a stock sr20det I'd trade plus cash?

[GroundPerformance]

Looks to be a solid setup.. Why trade? anyways GLWS!

[slmdstnc]

Groundperformance: I built the car with regards of high hp, but then realized all I really need is a bit more to keep the car sideways and fun. Therefore looking for a sr20, or if I stumble across an Ls, ill go that route.

[OrangeVirus1]

Wow I never knew KA's had Oil squirters

[slmdstnc]

I just epoxied them in there for the hell of it. JK haha

[findmea240]

Would you take a stock sr plus cash?

[slmdstnc]

Pmed, cash on top of the sr.

[slmdstnc]

Will also possibly trade for a bike!

[bathsaltsamurai]

Wow I never knew KA's had Oil squirters

Single cams don't.

[slmdstnc]

Bump, If anyones wondering I do have all other necessary components, they'll be mounted as soon as I get a second!

[slmdstnc]

Got an sr20 lined up, let it go for 3000 OBO

[slmdstnc]

Bumpppp


Sent from my iPad using Tapatalk HD

[Chopped]

you willing to part with turbo intercooler rail manifold and injectors?

[slmdstnc]

Bumpppp whole motor w/harness and trans for 3k

Or part out if you're serious leg me know what you want, and it'll be yours!

[slmdstnc]

It's a great motor, full setup minus bov, waste gate, and Ecu. Someone please buy I'm also willing to ship.

[robarmour123]

sell the turbo? ill buy asap.

[slmdstnc]

Let's try this again, ill let the full motor go for 2900. If not I'm parting, let me know what you need....
Short Block w/all internals
Cylinder head
Turbo
Manifold
Clutch
Flywheel
Etc

[OiyItsC4ry]

This engine is simple and clean! GLWS

[s4cxnick]

any interest in a built sr? lol manleys, wisecos, arp.. the works. pm me if youre interested. im looking to go back ka. my motor is sitting on 0 miles, never ran yet either.

[slmdstnc]

Bump still available

[drftngs14]

Id be interested in the stock tranny if available...

[RacerX87]

Oh for facks sakes! If I had three G's to drop I would buy this in a heartbeat. Glws bro.

[chiboy002]

did you personally build this or a shop?
history on block/whoever built it?

im down but for 3k i don't want some nobody building a ka (no offense)

[slmdstnc]

Block and head was redone at engine rebuilders in stone park, motor was built by myself and a colleague whole we've both put together 4 Ka's, one blew up due to reusing an oil pump.... But don't worry I understand

[slmdstnc]

Whom* gay auto correct

[slmdstnc]

Bump to the top

[2jdm4you]

What do you want for just the short block?