PDA

View Full Version : KY Ka24det for sale/trade


shorty69187420
03-31-2013, 09:21 AM
Engine has zero miles on it, I built it to be a drag strip car on the weekend and a dd but I am wanting to go with a sr20 now. Engine was put together a couple of weeks ago and I can guarantee you that the engine will start up because I started it before I pulled the engine out.

Vid of it running in the car right before i pulled it out.
Second start up ka24det - YouTube (http://www.youtube.com/watch?v=WJ2TLpH6i9o)

I would be willing to do a trade for a s14 sr20, seeing as that is what I am looking for... Price is $2500 Willing to negotiate on the price.

Parts not included:
FMIC
IC piping

Parts:
248/248 cam swap
isis short shifter
Wiseco 9:1 pistons
Eagle H Rods
Stage 3 unsprung clutch
12lb flywheel
Custom 3" downpipe
.63AR ISIS turbo
ARP Headstuds
Top mount log style turbo manifold
All gaskets/seals have been replaced
Cometic headgasket
New thermostat
rebuilt oil pump
new oil squirters
the head has had all of the valves replaced, port and polish along with a 3 angle valve job
Z32 MAF
750cc injectors from Five 0 motorsports
Top feed fuel rail
Custom rom tune for this setup w/s14 jumper harness from enthalpy

http://i184.photobucket.com/albums/x160/shorty69187420/20120721_110405_zps98fc279d.jpg
http://i184.photobucket.com/albums/x160/shorty69187420/20120815_220315_zps037b9b2b.jpg
http://i184.photobucket.com/albums/x160/shorty69187420/20120817_220739_zpsd001308c.jpg
http://i184.photobucket.com/albums/x160/shorty69187420/20120818_220231_zps76f6138d.jpg
http://i184.photobucket.com/albums/x160/shorty69187420/20120819_191532_zps617808f4.jpg

shorty69187420
04-02-2013, 04:06 AM
I am not willing to part anything out just yet, trying to sell everything as a whole right now

shorty69187420
04-05-2013, 06:29 AM
Price reduction to $2500, put the motor up on ebay also.. hoping someone will buy soon, i just purchased my sr from zerolift

ProjectPanda13
04-05-2013, 07:53 AM
What are the compression numbers for the motor? Has the motor been broken in, if so how?

Thanks,
-Dave

Sent from my SGH-T889 using Tapatalk 2

shorty69187420
04-05-2013, 10:02 AM
I have no idea what the compression numbers are for the motor, it has not been broken in, the engine has ran for maybe about 20 seconds. Only purpose of getting the motor running was so i could see if anything was wrong with it before i tried to sell it.

shorty69187420
04-06-2013, 07:16 AM
last bump for this thread

shorty69187420
04-09-2013, 07:23 PM
SOLD!!!!! please close/lock thread