Mazworx S14/S15 Fuel Rail Kit

[Mazworx_Sales]

Finally! We have finished the S14/S15 SR20 top feed fuel rail conversion kit. Please feel free to email us at [email protected]

This complete fuel rail kit allows you to run a top feed fuel rail on your stock S14/S15 intake manifold.
Each fuel rail is precisely CNC machined to fit top feed injectors with a maximum length of 48mm from
o-ring to o-ring. The fuel rail allows you to run a factory fuel pressure regulator or equivalent (ex.
Nismo Type A) and a fuel pressure gauge.


This kit will work with stock intake manifolds and also GReddy intake manifolds!

The basic v1 kit comes with:
Mazworx -6an fuel rail
IACV Spacer
Brackets/Spacers/Hardware
-6an fitting and -6an port plug

MSRP $199.00

http://www.mazworx.com/pics/s14fuelkit_1_web.jpg


The basic v2 kit comes with:
Mazworx -6an fuel rail
IACV Spacer
Bracket/Spacers/Hardware
-6an fitting and -6an port plug
Nismo Type A Fuel Pressure Regulator
Injector Dynamics ID725/ID850/ID1000 injectors w/pigtails
Universal Fuel Pressure Gauge

MSRP $899.00

http://www.mazworx.com/pics/s14fuelkit%20_2_web.jpg

http://www.mazworx.com/pics/s14fuelkit_3_web.jpg

[richmond82]

This is Great ! I machined a few areas of the Stock S15 Sr20det Intake manifold for clearance. Plugged nipple for IACV and moved it to the side of the manifold. Took a bit of work and lots of brainstorming but definately a clean fit

I used Titan Motorsports SR Rail and Sl 750 RC engineering Injectors.

[dorkidori_s13]

any plans for a Redtop/Blacktop setup? possible side feed configuration? im really digging this kit, would like to see it for s13 application though

[Mazworx_Sales]

Our fuel rail kit also now works with GReddy intake manifolds.

http://www.mazworx.com/pics/greddy_intake.jpg