Jaketenpointo
03-20-2013, 06:42 PM
It has 162k but the 1.8l was rebuilt by the previous owner about 3k before I got it so maybe 5-7k ago, full rebuild was Pistons, Bearing, Seal, Gaskets, Water Pump, Timing Belt, Oil pump, and accessory belts. When the motor was done he also did a "Happy Meal 2" clutch from flying miata: Flyin' Miata : Engine/Drivetrain : Transmission : Flyin` Miata supersize clutch Happy Meal (http://www.flyinmiata.com/index.php?deptid=4531&parentid=0&stocknumber=08-36000%20%2010.30) with the 10.3lb flywheel. He also did Racing beat long tube headers: Flyin' Miata : Exhaust : Normally aspirated : 1990-05 Racing Beat 4-into-1 header (http://www.flyinmiata.com/index.php?deptid=4503&parentid=0&stocknumber=06-86100%20%201990-93) and goodwin racing RoadsterSport exhaust: COMPLETE Cat-Back RoadsterSport 3 Miata Polished Stainless Steel Exhaust for 90-97 for Miata 1990-1997 (http://www.good-win-racing.com/Mazda-Performance-Part/61-0171.html). It has the OEM Torsen LSD, front strut bar, its lowered on H&R coils with Tokico shocks. Cross Drilled and slotted front rotors, Cross drilled rear rotors. 6x9's installed in the package tray and new speakers in the doors, with a sony amp to drive them in the trunk. Car has Power Steering, Power Windows, A/C, And Heat.
Issues are: Could use a new soft top cloth. They are about $200 and take 2-3 hours to install. This top works, but it has 2 small holes in it that have been taped and the rear glass window is sewn in. And the front bumper is not pretty. The car is pretty clean but the front bumper has chips missing. Other than that it runs great and hasn't skipped a beat.
http://i58.photobucket.com/albums/g256/Jake12pointo/IMG_0054.jpg
http://i58.photobucket.com/albums/g256/Jake12pointo/IMG_0051.jpg
http://i58.photobucket.com/albums/g256/Jake12pointo/IMG_0052.jpg
http://i58.photobucket.com/albums/g256/Jake12pointo/IMG_0053.jpg
Looking for a 240sx, S13 hatch or S14. Or I might sell it...
Thanks
Jake
Issues are: Could use a new soft top cloth. They are about $200 and take 2-3 hours to install. This top works, but it has 2 small holes in it that have been taped and the rear glass window is sewn in. And the front bumper is not pretty. The car is pretty clean but the front bumper has chips missing. Other than that it runs great and hasn't skipped a beat.
http://i58.photobucket.com/albums/g256/Jake12pointo/IMG_0054.jpg
http://i58.photobucket.com/albums/g256/Jake12pointo/IMG_0051.jpg
http://i58.photobucket.com/albums/g256/Jake12pointo/IMG_0052.jpg
http://i58.photobucket.com/albums/g256/Jake12pointo/IMG_0053.jpg
Looking for a 240sx, S13 hatch or S14. Or I might sell it...
Thanks
Jake