Maximum rear camber

[eastonh477]

how do i achieve this! i need around -5 degress to fit some baller wheels. going hellaflush for show season. i have a drift settup to so please dont yell at me for ruining the car. Which upca will give me maximum camber. what else can i do. thanks for the help and please refrain from negativity :p

[oni jake]

You seem to be confused.

Hellaflush =/= drift setup

In any case, an adjustable RLCA will help you if you're maxed on the other arms.

[zerodameaon]

Go buy a set of adjustable RUCAs and take out all the lock nuts and screw it all the way in, then load it on a trailer to go to shows and don't drive it.

[Croustibat]

Apply fender roller, then you can use your baller wheels AND have a correct geometry ...

[silviaks2nr]

Sell your 240sx

[rwtf]

Sell your 240sx

lolol:)

msglength

[Atill93]

Sell your 240sx

hahaha yes

[eastonh477]

for those that helped thanks. for everyone else thanks for doing what i asked not

[codyace]

I assume you won't be driving this car anywhere right? It's just for shows?


As putting -5* in is going to cause all sorts of funny stuff alignment wise in the back in regard to toe. Make sure you can at least get the wheels pointed straight once you hack up the cars to put wheels on cars that don't fit. Enabling proper rear toe is the only way to keep your tires alive (well, somewhat alive).

[towlie]

how do i achieve this! i need around -5 degress to fit some baller wheels. going hellaflush for show season. i have a drift settup to so please dont yell at me for ruining the car. Which upca will give me maximum camber. what else can i do. thanks for the help and please refrain from negativity :p

Lol I confused :rimshot: