Sunroof Delete Panel

[Guilty1s]

Does anybody still make them. Only one I could ever find was the Kognition and they stopped making them long ago.

[gambit420s]

Does anybody still make them. Only one I could ever find was the Kognition and they stopped making them long ago.
http://safety.fhwa.dot.gov/ped_bike/hispanic/fhwanhtsa/images/signs1.jpg

[Nissansota240]

I made a delete bracket that reuses the sunroof glass. :snoop:

http://i1208.photobucket.com/albums/cc362/Nissansota/Zenki%20Drift%20Build/IMAG0563-1.jpg

It bolts directly to the rack mount and to the bottom of the sunroof.

http://i1208.photobucket.com/albums/cc362/Nissansota/Zenki%20Drift%20Build/IMAG0564.jpg

http://i1208.photobucket.com/albums/cc362/Nissansota/Zenki%20Drift%20Build/IMAG0565.jpg

http://i1208.photobucket.com/albums/cc362/Nissansota/Zenki%20Drift%20Build/IMAG0567-1.jpg

Here is the fitment on the top.

http://i1208.photobucket.com/albums/cc362/Nissansota/Zenki%20Drift%20Build/IMAG0568-1.jpg

[jds]

just took my sunroof out a few days ago, going to cut out a piece of sheet metal and weld it in.

[om3ga]

My friends that hated their sunroof have always swapped the entire roof skin lol. Kind of extreme though.

[Chaluska]

use a bunch of painters tape on the inside and fill in the entire sunroof panel (sticky side up), and fiberglass on top of the painters tape, whenever is hardens, peel off the tape, and enjoy your new form fit block off panel.

painters tape doesnt stick to fiberglass, so you can peel it once it hardens.

[Sleepy_Steve]

I just riveted in a steel panel from Lowes. It makes a good place to store my track number magnets, doesn't leak, and now I can fit in the car with a helmet on in the stock seats. Total cost was like... $30 or so?


http://i16.photobucket.com/albums/b24/sleepysteve72/car%20pics/100_0248-1.jpg


http://i16.photobucket.com/albums/b24/sleepysteve72/car%20pics/100_0249-1.jpg

[collegekid]

^ thats a good idea


I had sheet metal welded in place, but it will deform even if you get a roof support welded along with it. the fiberglass is probably the best idea if you can remember not to bang on your roof.

If you weld, make sure you go slow as fuck because the metal is so thin uptop.

[Sleepy_Steve]

I do track weekends, so I wanted something that would be at least as safe as the factory non-sunroof car would be in a roll over event. Fiber glass (esp my DIY skills with that material) didn't fit that bill, but a decently thick sheet of steel at Lowes did once I went a little heavy on the rivet count.

The roof IS curved, and the sheet IS flat, so there will be some humps along the edges that need to be filled with RTV. I riveted it from the center front and finished it at the back to place those humps where they would bother me the least. I also found I needed to cover the tops of the rivet heads to stop all the leaks. Used about half a tube of black RTV in a caulk gun to do it.

[Guilty1s]

I made a delete bracket that reuses the sunroof glass. :snoop:

http://i1208.photobucket.com/albums/cc362/Nissansota/Zenki%20Drift%20Build/IMAG0563-1.jpg

It bolts directly to the rack mount and to the bottom of the sunroof.

http://i1208.photobucket.com/albums/cc362/Nissansota/Zenki%20Drift%20Build/IMAG0564.jpg

http://i1208.photobucket.com/albums/cc362/Nissansota/Zenki%20Drift%20Build/IMAG0565.jpg

http://i1208.photobucket.com/albums/cc362/Nissansota/Zenki%20Drift%20Build/IMAG0567-1.jpg

Here is the fitment on the top.

http://i1208.photobucket.com/albums/cc362/Nissansota/Zenki%20Drift%20Build/IMAG0568-1.jpg


I really like this, Im going to attempt to do this as I love my sunroof, I just don't fit in it with a helmet and brides...

I just riveted in a steel panel from Lowes. It makes a good place to store my track number magnets, doesn't leak, and now I can fit in the car with a helmet on in the stock seats. Total cost was like... $30 or so?


http://i16.photobucket.com/albums/b24/sleepysteve72/car%20pics/100_0248-1.jpg


http://i16.photobucket.com/albums/b24/sleepysteve72/car%20pics/100_0249-1.jpg

If that don't work, this will do just fine for me.

Thank you all.

[itsdboy]

you guys are all trying to delete your sunroof while im wishing my coupe had one.

[andrew600]

i fucking hate my sunroof. has someone welded a plug in? ive always felt it will pull apart the roof welds by doing so. anyone have a few pics from swapping roof skins?

[rage]

I made a delete bracket that reuses the sunroof glass. :snoop:

http://i1208.photobucket.com/albums/cc362/Nissansota/Zenki%20Drift%20Build/IMAG0563-1.jpg



you should consider making these brackets, definitely a clean way to delete the sunroof

[fliprayzin240sx]

I just riveted in a steel panel from Lowes. It makes a good place to store my track number magnets, doesn't leak, and now I can fit in the car with a helmet on in the stock seats. Total cost was like... $30 or so?

http://i16.photobucket.com/albums/b24/sleepysteve72/car%20pics/100_0248-1.jpg


http://i16.photobucket.com/albums/b24/sleepysteve72/car%20pics/100_0249-1.jpg

I hate to say it but that looks like poopies.

The solid brackets wont really fix the issue you'd have with the sunroof, which is the fiberglass trim breaking apart, not sealing the edges and leaking like a muffo.

[Nissansota240]

The solid brackets wont really fix the issue you'd have with the sunroof, which is the fiberglass trim breaking apart, not sealing the edges and leaking like a muffo.

My plan for the bracket was to also make a sealant strip that would go in between the roof and the sunroof, creating a water tight seal on the entire piece. Also the plastic trim is not broken on mine, so basically I really only have to worry about making sure that the sunroof glass is sealed. Doesn't seem like it will be to big of an issue.

[fliprayzin240sx]

Thats the thing, the fiberglass piece is not broken...yet. Itll happen eventually. Once that piece starts chipping away, a chunk of it will just fly off one day while youre driving. When that happens, welcome to the same issue that every S14 sunroof owner dreads. You cant replace that trim, that piece holds the rubber sealant in place, so you'd have to figure out another way of sealing it without making it look like absolute poop.

Keep an eye on the edge of that trim. If you start noticing it delaminating off the glass on the inside corners, its roh-roh time.

[Nissansota240]

Which is why I'm a bit surprised that no one has come up with a fiberglass piece that would work similar to the brackets I made. Would look similar to an RX7 sunroof from the outside.

[EliteGTR]

**********

[KiLLeR2001]

^__^

msglength

[240sxrb30]

Do any of y'all still have the glass part. I figured this would be the best way to get one.

[fliprayzin240sx]

Glass part is easy to find. Find one with the fiberglass trim/rubber seal intact is a different story.

[240sxrb30]

The trim is the only reason why I'm looking for a new one. Since that's the only part we can't buy seperate from the rest. Wish somebody would make a cf trim piece.

[SuperBlackS14]

You'd think someone would re-engineer these things eventually...

[andrew600]

I'm really surprised there isn't a delete panel made. I would so buy one.

[zenkiZ]

Older thread but thought I'd share my delete panel from fiberglass..

http://i23.photobucket.com/albums/b376/skimnwake/A74EBFFE-891D-4444-8395-AD002A159E94-927-0000008CA3F38F3A_zps6bde3428.jpg


http://i23.photobucket.com/albums/b376/skimnwake/D6EE62B8-B7A8-49BD-9399-A81414C505AC-927-0000008CB31622CB_zps4e6b923b.jpg


http://i23.photobucket.com/albums/b376/skimnwake/741366E9-4286-419E-AB02-53BB1B05E191-927-0000008CBB65660A_zpsa934cef0.jpg

[CrimsonRockett]

A buddy of mine is actually in the process of making these. Very similar to Kognition. Real CF and strong as all hell.

Both S13 and S14.

[Matej]

Someone please replicate the OEM sunroof out of carbon fiber. I want a carboon fiber sunroof that I can keep popped open. :)


http://ryan.tobinhosting.com/album/album337/aai.sized.jpg

[KiLLeR2001]

j45x9ranFH0

[AngryPanda]

i will have s13 and s14 available this summer

[towlie]

A buddy of mine is actually in the process of making these. Very similar to Kognition. Real CF and strong as all hell.

Both S13 and S14.


Hmm more info?

[EvilRB]

I want a sunroof so bad for my car...

[RurouniMidnight]

A buddy of mine is actually in the process of making these. Very similar to Kognition. Real CF and strong as all hell.

Both S13 and S14.

I hope so, will be so down.

[TheRealSy90]

I just want some of those metal brackets, the CF panels are going to be too expensive...

[Nissansota240]

Anything that bolts to the top of the roof skin or is glued to the top will look like shit. No matter how nice the material. (Just my opinion)

[blueshark123]

I personally hated the look of kognition sunroof delete.

[RurouniMidnight]

What didn't you like about it? It was the simplest cleanest way to cover a big whole in the top of your car, and weighed like 1lb. Was it the carbon because it can be painted to match body color.

I loved the one in my old S14 and wish i could get another for my new car.

[blueshark123]

What didn't you like about it? It was the simplest cleanest way to cover a big whole in the top of your car, and weighed like 1lb. Was it the carbon because it can be painted to match body color.

I loved the one in my old S14 and wish i could get another for my new car.

I like a cleaner look even painting it will still look like crap imo. I dont want to see shit glued on like a patch all shitty. I want to create a insert of where the stock one is that boltes on like the stock sunroof.

[Rustys14]

I want to create a insert of where the stock one is that bolts on like the stock sunroof.

I would like something like this too but it would be much harder to make then the kognition style patch. Maybe if enough people showed interest we could get an frp company to produce one as I'm sure it would sell well.

Edit: Something like this but a little cleaner and for the s13.
http://i23.photobucket.com/albums/b376/skimnwake/A74EBFFE-891D-4444-8395-AD002A159E94-927-0000008CA3F38F3A_zps6bde3428.jpg

[zenkiZ]

That is on a s13 coupe,and it isn't finished yet so yea not that clean hahaha

[fliprayzin240sx]

I finally saw a kognition plug for the first time, I was in the impression that its perfect fit kinda deal, not a sit on top and glued down kinda crap. Not impressed and do not want...

[fliprayzin240sx]

someone please replicate the oem sunroof out of carbon fiber. I want a carboon fiber sunroof that i can keep popped open. :)


http://ryan.tobinhosting.com/album/album337/aai.sized.jpg

i waaaaants!!!

[Frank_Jaeger]

S13 hatch roof skin swap with a few pics. (http://www.tamparacing.com/forums/nissan-infiniti-tech/654215-s13-hatch-roof-skin-swap-few-pics.html)

[BoostinIX]

Kognition on a black car blends in pretty well. Have yet to hear "wtf is that" or similar. Guessing the panel + sealant stand out more on lighter colors.

[blueshark123]

Its like having a 240sx with overfenders riveted on i just dont like that look.

[KiwiZenki]

Newbs with your sunroofs...

[blueshark123]

Newbs with your sunroofs...

STFU Newb.

[fliprayzin240sx]

STFU Newb.

Its okay, reported for having too many bumps in his FS thread...

[KiwiZenki]

Yeah, shit sold on d-town.

I won't spam though, sorry, lost money on those hubs.

[240boi115]

Newbs with your sunroofs...
just wow....:dead:
i waaaaants!!!

my god....thats got to be one of the coolest sunroofs ive seen. how come verside, vis, version select or even 6666 customs haven't produced these yet!?!?!?!?!?:wiggle:

[Nissansota240]

Newbs with your sunroofs...

You'd think being from Minnesota you'd be a bit nicer.

[KiwiZenki]

You'd think being from Minnesota you'd be a bit nicer. Haha, just joking, not trying to thread jack.

[JohanM]

i will have s13 and s14 available this summer

I'm interested on one for a s13.

[slideways2004]

The kognition panel was so thin that you can barely see it! It's not like overfenders where you can see a thick rivet on piece.

It was molded to the shape of the roof (not flat!) and fit perfect. If someone painted it, i bet 99% of people wouldn't event notice it.

The problem with panels that are the same size as the glass is the sealing. It will most likely leak and not look as sleek. Overlapping a very thin piece of carbon is the way to go

[Nissansota240]

How would you not notice a kognition panel. If it doesn't sit flush its going to be noticed. Plus I would think that even with painting it a kognition will still look shitty, thats my opinion though. A piece that large riveted onto the roof of the car, especially a low car.

There are enough products out there that it would not be to difficult to find the necessary seals to keep a glass replacement option from leaking.

[Thedriftbadger]

I don't see why you couldn't just weld in a piece of steel flush in the hole. Just weld slowly so you don't warp the metal and it should come out fine. That's what i'm going to do. You wouldn't have to worry about leaks and there won't be any brackets in the way of the headliner.

[BoostinIX]

Who rivets a Kog. sunroof delete? The overlap isn't nearly enough for that. 3M windshield sealant, it's not coming off. No gloss on it = most people don't notice it on a black car/assume its a solid moonroof, have to point it out usually.

[PrimeDirective]

CrimsonRocket, any update on your buddy's sunroof delete panels?

[TheRealSy90]

Wondering what happened with this...

[mechanicalmoron]

I've never understood hating sunroofs. If you're tall or whatever, I get it, but, covering them with the haggard shit people do?

Like, be it a purpose-bought plate, or a homedo, it looks like utter SHIT to rivet something just on top of it. Why can't a "delete" just be a panel with a seal around the edge, that actually replaces the sunroof and sits in the hole?

And so it leaks.... isn't it better to take rtv to your roof, than have a giant panel o'shit riveted to your roof?

Keep the ziptie "culture" off your roof.

Plus, having a sun roof would be so nice....

[Nissansota240]

Right now I am currently working on a fiberglass sunroof delete panel that can bolt in to the factory track system or to my track delete system. Also planning on making more of my brackets. Currently only have them designed for s14 sunroof glass.

[TheRealSy90]

Right now I am currently working on a fiberglass sunroof delete panel that can bolt in to the factory track system or to my track delete system. Also planning on making more of my brackets. Currently only have them designed for s14 sunroof glass.


Yeah man I would love some brackets for s13 coupe moonroof! It would be cool if you could make a kit that makes it flip up like the hatch one lol.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[RurouniMidnight]

Just letting anyone thats interested know, kognition is making the s14 carbon delete panels again just hit him up by email or on facebook. I picked one up a little over a month ago and loving it. I also installed a non sunroof headliner to keep the interior looking clean.


http://i798.photobucket.com/albums/yy262/RurouniMidnight/20131117_163449_zpseb6ae74c.jpghttp://i798.photobucket.com/albums/yy262/RurouniMidnight/20131117_163433_zpsccf9eba6.jpg

[Guilty1s]

How much was it?


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[RurouniMidnight]

$300 shipped

[shogun!]

http://www.enjukuracing.com/product_images/z/225/240sx%2520carbon%2520roof__85779_zoom.jpg

http://img.photobucket.com/albums/v166/bigtone/100_2572.jpg

[fliprayzin240sx]

I've never understood hating sunroofs. If you're tall or whatever, I get it, but, covering them with the haggard shit people do?

Like, be it a purpose-bought plate, or a homedo, it looks like utter SHIT to rivet something just on top of it. Why can't a "delete" just be a panel with a seal around the edge, that actually replaces the sunroof and sits in the hole?

And so it leaks.... isn't it better to take rtv to your roof, than have a giant panel o'shit riveted to your roof?

Keep the ziptie "culture" off your roof.

Plus, having a sun roof would be so nice....

The kicker for the S14 guys is that you can't fix the sunroof when the fiberglass trim breaks off. You'd have to buy a new whole glass assy. Fuckers are over $1k from nissan, thats assuming they're even making them still at this point.

Right now I am currently working on a fiberglass sunroof delete panel that can bolt in to the factory track system or to my track delete system. Also planning on making more of my brackets. Currently only have them designed for s14 sunroof glass.

Keep me in the loop, I'd be all over this. I want to replace the glass but keep the functionality of the sunroof.

[Nissansota240]

Keep me in the loop, I'd be all over this. I want to replace the glass but keep the functionality of the sunroof.

Yeah, I'm hoping when done it will be similar to like an RX7 sunroof. Just paint it to match your car. With the brackets also it will completely allow you to remove your sunroof system and get a bit more headroom.

[mechanicalmoron]

http://www.enjukuracing.com/product_images/z/225/240sx%2520carbon%2520roof__85779_zoom.jpg

http://img.photobucket.com/albums/v166/bigtone/100_2572.jpg
That's bitchin'. I don't even have to research it to know that it probably costs more than my car.
Just letting anyone thats interested know, kognition is making the s14 carbon delete panels again just hit him up by email or on facebook. I picked one up a little over a month ago and loving it. I also installed a non sunroof headliner to keep the interior looking clean.


http://i798.photobucket.com/albums/yy262/RurouniMidnight/20131117_163449_zpseb6ae74c.jpghttp://i798.photobucket.com/albums/yy262/RurouniMidnight/20131117_163433_zpsccf9eba6.jpg

Actually, that looks really nice. I've never seen a sunroof delete option that was not rivited down... which obviously sort of ruins the shell, and makes it so you can NEVER have a normal looking car again. Also, I'm not sure the color is a problem, if you don't try to hide things sometimes it looks a lot better.

It's just that with rivets you KNOW it's going to look like a clapped out piece of shit, on a car with crap rivited to the roof the bumper is probably stitched with zipties and there's a smashed widebody kid rivited crooked, bleeding rust from the rivets, the wheels are rattlecanned (probably more than one color), there's tastless stickers, and the owner thinks every one of these factors makes him a bit cooler.

And if the owner who deletes it doesn't do it like that, when it's sold it will be to a tool like that, and he'll feel like the rivets give him permission to rivet everything else.

I take it all back though, that actually looks just fine. delete the hell out of it.... just don't ruin your roof with rivets.

[rbs14kouki]

Just letting anyone thats interested know, kognition is making the s14 carbon delete panels again just hit him up by email or on facebook. I picked one up a little over a month ago and loving it. I also installed a non sunroof headliner to keep the interior looking clean.


http://i798.photobucket.com/albums/yy262/RurouniMidnight/20131117_163449_zpseb6ae74c.jpghttp://i798.photobucket.com/albums/yy262/RurouniMidnight/20131117_163433_zpsccf9eba6.jpg


How does it seal !? It bolt down from under ?

[OBEE]

i'm just gonna leave this here :boink:

http://i35.photobucket.com/albums/d159/victim_of_society_15/roof2.jpg

[S14Serge]

I'm having the dreaded s14 fucking sunroof fiberglass coming apart problem! Time to look into one of these or replace with an oem assembly. Nice as pieces on this thread tho, good to know all these options.

[1Day]

Guys I just got ahold of Kognition Design last night on one of these, they don't have anymore and they said MAYBE in the spring. So what I figure is we let them know there are still people out there that want them, SO EMAIL THEM ABOUT INQUIRY PLEASE. Maybe if they see there is a demand for the piece they will be more apt make them sooner.

[blueshark123]

Once i have spare time i might try to make a paintable sunroof out of a broken one i have laying around so it will be a flush insert that functions like a normal sunroof still. I plan on removing glass lay down a mdf thin board then fiberglass it paint and make a new seal for it.

[fliprayzin240sx]

^^^You've been saying that for a while now...make it happen!!!

When my trim breaks off, I'm probably just gonna make a solid bracket and just lay fiberglass on the whole glass to keep the seal in place.

[Nissansota240]

If you are referring to me, I'll be making some brackets this weekend if everything goes right. The fiberglass panel is gonna take some time though.

[icedsole]

If you are referring to me, I'll be making some brackets this weekend if everything goes right. The fiberglass panel is gonna take some time though.

Ill be curious to see your brackets, I remember the ones you made for yourself. Are these any different?

I would love to get rid of the sunroof tracks so I can run a non sunroof headliner and make more room for my cage, I was also going to cut nice a hole in the non sunroof headliner to allow light in. Would it be possible to make a bracket that would allow the sunroof to be popped as well?

[Nissansota240]

Ill be curious to see your brackets, I remember the ones you made for yourself. Are these any different?

I would love to get rid of the sunroof tracks so I can run a non sunroof headliner and make more room for my cage, I was also going to cut nice a hole in the non sunroof headliner to allow light in. Would it be possible to make a bracket that would allow the sunroof to be popped as well?


Currently I am going to be making exact copies of what I have now. Which are the ones posted on the first page of this thread.

Making an s14 sunroof into a pop up is a bit more involved then just the brackets. I suppose it wont hurt to look into it.

I took this off of a friends car that was totaled, so I can use it to start fabbing on s14 sunroof stuff without crawling around inside my caged car.

http://i1208.photobucket.com/albums/cc362/Nissansota/Zenki%20Drift%20Build/IMAG2030_zps09c56496.jpg

[blueshark123]

^^^You've been saying that for a while now...make it happen!!!

When my trim breaks off, I'm probably just gonna make a solid bracket and just lay fiberglass on the whole glass to keep the seal in place.


:hide: I know i just been so freaking busy with work and advancing in my career I barely even have time to just hang out . I also am picking up a spare sunroof this week that is mint as a extra spare so i can have for the future. Hopefuly i have this little project done before spring

[Nissansota240]

For anyone that is interested I will be making a few sets of these this coming weekend.

http://i1208.photobucket.com/albums/cc362/Nissansota/Zenki%20Drift%20Build/IMAG0563-1.jpg

[Nissansota240]

In case anyone is interested, a buddy and I finally took the time to make a few of these, have about 5 total made.

http://zilvia.net/f/sale-items/548781-s14-sunroof-track-delete-brackets.html

[EliteGTR]

how do you guys feel about one made from billet aluminum? it would replace the glass but keep the sunroof functional. hoping it would be lighter than the glass but if not at least it wont fall apart lol.

[TwelveAM]

If anyone SoCal wants a hardtop just let me know and we can trade if your S14 is straight stock. ;)

[Beas]

I installed the brackets from Nissansota240 today. they fit well and seem to be good quality.

http://imageshack.us/a/img706/7582/0dk3.jpg

http://imageshack.us/a/img4/952/dw4o.jpg

I would guess i gained about 2 inches of headroom. keeping the headliner for now, to see how i like it. i just cut a little bit out for helmet clearance.

http://imageshack.us/a/img513/4469/r97m.jpg


i have the sunroof framework laying around if anybody near San diego wants to buy it.

[sleepyS14se]

Will a non sunroof roof interior panel fit when using the nissansota brackets

[TheRealSy90]

It would probably fit if you trimmed the extra stud length that sticks out of the nuts.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[PrimeDirective]

I want these brackets with some sort of plug to replace the glass since my fiberglass piece is shredded.

[Nissansota240]

So if anyone was interested a friend and I where able to make a prototype bracket to build the actual bracket out of for a S13 Coupe Power Sunroof/Moonroof. So some of those brackets will be made soon.

The only thing I'm unsure about is that the sunroof glass that we used only had 2 (two) studs coming down that allowed fore attachment to the sunroof track system. Now I know there was a difference between s14 ones, some glasses had 2 studs while others had 3.

Anyone have any input on this?

[di-devol]

So if anyone was interested a friend and I where able to make a prototype bracket to build the actual bracket out of for a S13 Coupe Power Sunroof/Moonroof. So some of those brackets will be made soon.

The only thing I'm unsure about is that the sunroof glass that we used only had 2 (two) studs coming down that allowed fore attachment to the sunroof track system. Now I know there was a difference between s14 ones, some glasses had 2 studs while others had 3.

Anyone have any input on this?

I'll take some brackets please haha.

[Munki]

http://www.enjukuracing.com/product_images/z/225/240sx%2520carbon%2520roof__85779_zoom.jpg

http://img.photobucket.com/albums/v166/bigtone/100_2572.jpg


We're actually making a roof cap/sunroof delete for S13 but were using a Z06 roof design to give the S13 an updated look.

This is the style were using \/
http://www.fiber-concepts.net/upload/up/d1c57704eb981854b2c0e298e97250bf.jpg

[Nissansota240]

S13 Coupe Power Sunroof Delete Brackets

http://i1208.photobucket.com/albums/cc362/Nissansota/Around%20the%20Shop/IMAG0069_zpsjciekjxg.jpg (http://s1208.photobucket.com/user/Nissansota/media/Around%20the%20Shop/IMAG0069_zpsjciekjxg.jpg.html)

Do s13 hatchbacks have powered sunroofs? Also that roof skin looks pretty awesome.

[TheRealSy90]

No hatchbacks have a power glass, only flip-up. Also I haven't checked on the power-coupe glass studs yet lol sorry :/


Sent from my iPhone using Tapatalk