Sikky Manufacturing is now a Zilvia sponsor!

[SikkyMFG]

Hey Guys,

Sikky is pleased to announce we are now a vendor on Zilvia! We’re here for any product questions or sales inquires you may have. Just shoot us a PM, email ([email protected]) or give us a ring at 410-780-0009. My name is Justin and I will gladly help with anything you may need.

For those who may be unfamiliar with Sikky, I’ll give you a quick rundown on a couple of the products we currently offer:

http://i314.photobucket.com/albums/ll407/SikkyMFG/MKP0012_zps6de8b15b.jpg
LS swap kits for S13s, S14s and 350z/G35's. This kits are made to highest of standards. It's a direct drop in solution with no subframe/firewall modifications required.


http://i314.photobucket.com/albums/ll407/SikkyMFG/SB_1012S13S14_zps40fcfbb5.jpg
Front sways bars for the S13's and S14's. When swapping in motors other than the SR20 sway bar clearance can become an issue in these chassis'. We've designed this bar in a way to clear all swap setups without spacer blocks! They're 3-way adjustable and include all hardware needed for install.


We also offer quite a few other parts. Whether it be for your LS swap, suspension upgrades and even intake manifold gaskets. Plus plenty of new stuff coming to you guys for 2013!

When you get a second checkout our website, High Performance Auto Parts :: SIKKY Manufacturing (http://www.sikky.com). Let me know if you have anything I can help with.

[BiG MiKE86]

Awesome :) Just ordered your S13 Sway bar :D Welcome to Zilvia! You guys make awesome products

[drifter_for_life06]

+1 for my old employer :)

[SikkyMFG]

Awesome :) Just ordered your S13 Sway bar :D Welcome to Zilvia! You guys make awesome products

Glad to hear it man! Let us know if you need anything else :)

[2tonecoupegrl]

Good intake manifold gaskets also. Bought one of your rb25's a few years back. Welcome to being a Zilvia advertiser :)

[SikkyMFG]

+1 for my old employer :)

Haha been awhile!

Good intake manifold gaskets also. Bought one of your rb25's a few years back. Welcome to being a Zilvia advertiser :)

Thanks! And I'm glad to hear you were happy with your gasket

[Chaluska]

do we get any sort of discount ;) ;)

i really would love to buy that S13 swaybar.

[BOROSUN]

are you guys making the rear sway bar?

[Wabash9000]

Welcome, I will be ordering a complete s14 kit, a swaybar, mc, and an accusump from you hopefully sometime in the next 2 years. I can't wait till I can tear apart my car, this waiting is killing me.

[dawagarage]

cool congrats

that thermal gasket is pretty clever. similar to the phenolic spacers on my datsun

[SikkyMFG]

do we get any sort of discount ;) ;)

i really would love to buy that S13 swaybar.

Unfortunately I am not able to do discounts. We're setup this way so I don't undersell my dealers. However I will gladly setup you up with an S13 bar whenever you're ready :)


are you guys making the rear sway bar?

We do in fact have a rear bar in the R&D stages. An accurate ETA is still up in the air, but it will be available sooner rather than later!


Welcome, I will be ordering a complete s14 kit, a swaybar, mc, and an accusump from you hopefully sometime in the next 2 years. I can't wait till I can tear apart my car, this waiting is killing me.

Sounds great! Shoot me an email, [email protected], when you're ready. Or you can order directly off our website


cool congrats

that thermal gasket is pretty clever. similar to the phenolic spacers on my datsun

These are definitely an excellent, cost effective upgrade, no matter what your setup.

[dudermagee]

You guys working on anything new related to the 240sx LSX swap?

[Chaluska]

Free shipping for zilvia???

[treezzy]

Sikk yo!! another company to order from!

[Broadfield]

You guys working on anything new related to the 240sx LSX swap?

I know of one, a TR6060 mount;)

I just want to say Justin has been awesome with customer service anytime I need something or have a question. I pride myself on my customer service and always appreciate it when other companies share the same philosophy.

[BoostinIX]

2X shirts maybe.... ;)


(No, never letting it go! Lol )

[SikkyMFG]

You guys working on anything new related to the 240sx LSX swap?

Like Broadfield stated below, we do have a few more parts in the R&D stages for them. Keep your eyes peeled because new things are coming soon :)


Free shipping for zilvia???

I would if I could! I have to strictly stick to retail pricing so I don't undersell my dealers.


Sikk yo!! another company to order from!

Haha let me know if you need anything!

I know of one, a TR6060 mount;)

I just want to say Justin has been awesome with customer service anytime I need something or have a question. I pride myself on my customer service and always appreciate it when other companies share the same philosophy.

Thanks a lot Toby! Always a pleasure working with you.

2X shirts maybe.... ;)


(No, never letting it go! Lol )

Lol don't worry, our next batch of shirts will definitely include 2x!

[S13yeahbuddy]

I need an s13 sway bar it doesn't matter if its just the ka engine right

[tauntdevil]

Any chance are the LS swap parts able to be sold separate? Like I Just need the engine mounts since I made my own oil pan and drive shaft. Is it possible to purchase these things separately?

(Posting here just in case someone else had similar question)
If so, Ill PM you for more information.

[SikkyMFG]

I need an s13 sway bar it doesn't matter if its just the ka engine right

Yeah not a problem at all! Just let me know if you would like to setup an order.


Any chance are the LS swap parts able to be sold separate? Like I Just need the engine mounts since I made my own oil pan and drive shaft. Is it possible to purchase these things separately?

(Posting here just in case someone else had similar question)
If so, Ill PM you for more information.

We do not separate the kit out like that. It's all kept together because it's all designed to work in unison. So while you already have a pan and drive shaft, they may not work properly with the use of our mounts.

[twin_vector_turbo]

Not sure if I missed it, but how does the stiffness of the sway bar (all three positions) compare to the OE bar?

Also, what is the diameter of the collector on your 1 7/8" headers?

[SikkyMFG]

Not sure if I missed it, but how does the stiffness of the sway bar (all three positions) compare to the OE bar?

Also, what is the diameter of the collector on your 1 7/8" headers?

Let me check with an engineer to see if I can get that sway bar info for you. Being a sales guy I only have limited information in my system.

For the 1 7/8" headers they come to a 3.5" collector

[Ler56oy]

if its just the ka engine righthttp://flash.eviziotvreviews.com/9.jpg

[SikkyMFG]

if its just the ka engine righthttp://flash.eviziotvreviews.com/9.jpg

No these will work with every swap currently being done in these chassis'. Unless you have a weird setup that makes your oil pan sit very far forward. We have yet to see any swaps this bar cannot fit with.

[Sleepy_Steve]

are you guys making the rear sway bar?
We do in fact have a rear bar in the R&D stages. An accurate ETA is still up in the air, but it will be available sooner rather than later!

Rear Say Bar Suggestion; so that it can work seamlessly with your riser sub-frame spacers as a system, please include an option for either longer end links by 3/8"-1/2" or so, or a similarly sized spacer to space the rear bar down. On an S14 the exhaust hump can get awfully close to (READ CONTACT) the gas tank during a large bump event or on a heavily lowered car using a competing companies adjustable rear sway bar. :rolleyes: Find me at Hyperfest and ask me how I know.

Let me check with an engineer to see if I can get that sway bar info for you. Being a sales guy I only have limited information in my system.

+1 for knowing bar stiffness. Either relative to stock or in lbs/ft or kg/mm, (maybe lbs or kg per degree of flex makes more sense?) it would make it a lot easier for me to guess where I should have the thing set at when I go to a new track for the first time. It would be great *hint* if you could include that info in the installation instructions with the rear bar when it's ready for market.

If you have that info for the front bar, shoot me a PM.

[SikkyMFG]

Not sure if I missed it, but how does the stiffness of the sway bar (all three positions) compare to the OE bar?

Also, what is the diameter of the collector on your 1 7/8" headers?


Rear Say Bar Suggestion; so that it can work seamlessly with your riser sub-frame spacers as a system, please include an option for either longer end links by 3/8"-1/2" or so, or a similarly sized spacer to space the rear bar down. On an S14 the exhaust hump can get awfully close to (READ CONTACT) the gas tank during a large bump event or on a heavily lowered car using a competing companies adjustable rear sway bar. :rolleyes: Find me at Hyperfest and ask me how I know.



+1 for knowing bar stiffness. Either relative to stock or in lbs/ft or kg/mm, (maybe lbs or kg per degree of flex makes more sense?) it would make it a lot easier for me to guess where I should have the thing set at when I go to a new track for the first time. It would be great *hint* if you could include that info in the installation instructions with the rear bar when it's ready for market.

If you have that info for the front bar, shoot me a PM.

So I was able to get the stiffness specs for you guys. These are approximate numbers over the stock bar-

Inner hole = 84.6%
Center hole = 66.7%
Outer hole = 51.3%


For the rear bar I'll definitely pass that info along to my techs. We're really excited to release this bar and are working to get it done asap!

[BiG MiKE86]

So I installed my sway bar this weekend and noticed that my engine (2JZ) was pretty much sitting on it...

Then I read someone's blog about the sticker being upside down -_- and it only installing one way.

What's the deal here?

[SikkyMFG]

So I installed my sway bar this weekend and noticed that my engine (2JZ) was pretty much sitting on it...

Then I read someone's blog about the sticker being upside down -_- and it only installing one way.

What's the deal here?

This unfortunately does happen sometimes. When you got a guy out there putting stickers on a 100 plus bars, some can slip through the cracks upside down. With the fitment you're having there's a strong chance that's what happened. Try flipping it and see if that does the trick. If for some reason you still have issues let me know. My apologies for the inconvenience!