xoxide
02-18-2013, 03:23 PM
Alright, so a deal for another motor came up, and I cannot pass it up... Selling my SR swap because I need the money.
Will come with EVERYTHING you need minus a turbo, head, and Intercoolor/piping. I want to keep my head, so throw your turbo and head in and go.
I recently stipped the motor down to the bare block, cleaned and inspected everything and put all new OEM gaskets on it. This motor is fresh, it has been honed, and all bearings looked great. What it will come with:
S13 SR block
SR Tranny
New OEM gaskets (headgasket included)
AN fitting for turbo feed line
Isis braided turbo line
7 layer exhaust mani gasket
Possibly a SR harness (s13 SR into S14)
So much more I cannot think of.
ECU with ROM tune
Possibly ARP headstuds NEW
I may include an intercooler/piping setup for the right price.
There is quiet a bit of stuff that I know I am forgetting that I will include. You can come over and look at everything if you are serious about buying. You can have the ex mani/elbow, etc but I keep the turbo.
As it stands Id like to sell EVERYTHING for $1100 OBO
I also have the head, that I would consider selling but I am not in any rush
It is super fresh just back from the machine shop:
-S13 SR head
- BC Titanium Valve Springs/retainers
- BC Brass valve guides honed to fit right
- OEM new valve seals
- Camshafts in great shape, rockers and lifters have been cleaned lifters have been blead.
- Head was hot tanked
- Head was decked
- 5 angle "competition" valve job
- Valve cover and coilpack cover have been blasted down and are ready for the paint color of your choice.
This head has 0 miles on it, and I have over $1200 in machine work/parts done to it. Work was done by Horsepower by Hedrick on 103rd St, who has been a reputable race engine builder for years.
Ill let it go for $1100 firm.
http://i82.photobucket.com/albums/j259/sprinter1/IMAG0469_zps84ad7e66.jpg
http://i82.photobucket.com/albums/j259/sprinter1/IMAG0470_zpsa1bea3b2.jpg
Help me out guys!
Will ship at buyers expense.
Will come with EVERYTHING you need minus a turbo, head, and Intercoolor/piping. I want to keep my head, so throw your turbo and head in and go.
I recently stipped the motor down to the bare block, cleaned and inspected everything and put all new OEM gaskets on it. This motor is fresh, it has been honed, and all bearings looked great. What it will come with:
S13 SR block
SR Tranny
New OEM gaskets (headgasket included)
AN fitting for turbo feed line
Isis braided turbo line
7 layer exhaust mani gasket
Possibly a SR harness (s13 SR into S14)
So much more I cannot think of.
ECU with ROM tune
Possibly ARP headstuds NEW
I may include an intercooler/piping setup for the right price.
There is quiet a bit of stuff that I know I am forgetting that I will include. You can come over and look at everything if you are serious about buying. You can have the ex mani/elbow, etc but I keep the turbo.
As it stands Id like to sell EVERYTHING for $1100 OBO
I also have the head, that I would consider selling but I am not in any rush
It is super fresh just back from the machine shop:
-S13 SR head
- BC Titanium Valve Springs/retainers
- BC Brass valve guides honed to fit right
- OEM new valve seals
- Camshafts in great shape, rockers and lifters have been cleaned lifters have been blead.
- Head was hot tanked
- Head was decked
- 5 angle "competition" valve job
- Valve cover and coilpack cover have been blasted down and are ready for the paint color of your choice.
This head has 0 miles on it, and I have over $1200 in machine work/parts done to it. Work was done by Horsepower by Hedrick on 103rd St, who has been a reputable race engine builder for years.
Ill let it go for $1100 firm.
http://i82.photobucket.com/albums/j259/sprinter1/IMAG0469_zps84ad7e66.jpg
http://i82.photobucket.com/albums/j259/sprinter1/IMAG0470_zpsa1bea3b2.jpg
Help me out guys!
Will ship at buyers expense.