1986 rx7 turbo

[redsox066]

I have an 86 RX7 FC GTU (originally N/A) with an 88 Turbo II motor swap.
147 on chassis
10k on motor
Clean title
Tags good till July 2014


Engine:
-88 Turbo II motor
-Around 10k on rebuilt motor
-750cc Primary Injectors
-750cc Secondary injectors
-FMIC
-HKS bov
-Stock turbo at 6psi
-AN drain line
-Braided feed line
-Koyo Radiator
-Flex-a-lite Syclone e-fan
-Stage 2 Clutch
-Stainless Clutch line
-New slave and clutch master cylinder
-"Rats Nest removed"
-OMP block-off
-New NGK plugs
-Vision 10.2mm Plug wires
-Battery relocated to the rear w/ kill switch
-3inch Racing Beat exhaust
-New Fuel filter
-Walbro 255
-Mobil 1 Full Synthetic every 3k

Chassis:
-Kei Office coilovers
-Stance super angle kit
-Modded Knuckles
-4 piston brakes
-Ceramic pads
-Stainless steel brake lines
-Solid trans and diff mounts
-Varrstoen ES2 18x9.5 +12 and 18x1.5 +15
-Federal 595 SS all around, 225/40/18
-BN style kit (probably VIS)

Misc:
-New alternator
-New battery
-New o2 sensor
-New turbo gasket
-New exhaust manifold gasket
-New Upper and lower intake manifold gaskets
-All other exhaust gaskets
-Momo steering wheel (not the gay kind)
-Momo hub and quick release
-S5 Tailights


-Probably forgetting a bunch of stuff too



-Just looking to get something new, will sell or trade so offer it up, worst I can say is no, price is 7500 OBO! will sell without the wheels also.

-Text Brett at 480-254-0131 :trogdor:

http://i259.photobucket.com/albums/hh301/brettcool66/rx7/19565497-0de8-4e8e-9705-3733218748a9.jpg

http://i259.photobucket.com/albums/hh301/brettcool66/rx7/photo3.jpg

http://i259.photobucket.com/albums/hh301/brettcool66/rx7/5af42f20-30b1-43dc-ad9f-0e723f5162ef.jpg

http://i259.photobucket.com/albums/hh301/brettcool66/rx7/photo.jpg

[redsox066]

bumpbumpbump

[anothersr20]

GLWS

Overall a good dude and sweet car!

[redsox066]

i guess im keeping it lol

[Clarke240]

Just a quick observation- I work at the wonderful Jiffy Lube and every Mazda service manual and one of the key rules we have is never use synthetic oil in a rotary motor. Even if customer requested, we are supposed to deny the service. Is that myth or what?

Sent from my SPH-L710 using Tapatalk 2

[redsox066]

Just a quick observation- I work at the wonderful Jiffy Lube and every Mazda service manual and one of the key rules we have is never use synthetic oil in a rotary motor. Even if customer requested, we are supposed to deny the service. Is that myth or what?

Sent from my SPH-L710 using Tapatalk 2



Well i have the OMP (oil metering pump) which is used for oil injection, removed. so i use synthetic but i have to pre mix gas to make up for the OMP. But yeah Mazda doesn't recommended it