Quick question about wiring.

[Meow69guy]

Hey guys! I want to remove some unused wire from the source.. can i remove my body harness without pulling my motor? i have a 1992 s13 vert with a ka24de. thanks for the info!

[Ryanswartout]

yea you can but you will be unplugging everything from the motor and another thing that harness goes from your ECCS in your passanger side threw your fire wall then into a bunch of stuff up front accross the front of the car then back up threw the driver side fire wall and unplags there at the SMJ and a few other things, tackling this project will take you over 60hrs of work and you will know the engne wiring diagram like the back of your hand GLHF

[KoukiMonsta]

yea this isnt all that realistic...

but...unplug shit and see if the car still functions as needed. if it does, you dont need that shit....rough idea here.

[Nissansota240]

Gets pretty damn time consuming, I've been working on relocating a friends fuseboxes to under the dash. Only running the headlight, signal wires, and fan wires up to the front of the car.

http://i1208.photobucket.com/albums/cc362/Nissansota/Chris%20S13%20Hatch/IMAG1446.jpg

But I cut the wires in the wheel well instead of taking the SMJ out

http://i1208.photobucket.com/albums/cc362/Nissansota/Chris%20S13%20Hatch/IMAG1448.jpg

http://i1225.photobucket.com/albums/ee384/charteau/IMAG0580.jpg

I'm a lot further then that pic, almost have it done but still have a few wires left to run.

This is how much is left of the wiring in the front end of the car. Won't even be visible once the fenders are on.

http://i1225.photobucket.com/albums/ee384/charteau/IMAG0621_zps3cecd9e8.jpg