rear camber correction

[TokyoNights]

A while ago I saw a write up somewhere on how and where to notch the rear control arm to correct negative rear camber when lowering and now i cant find it..anyone else seen/done this?

[Otsego13]

240sx.org .........

[Chernobyl]

don't do redneck modifications. Get some adjustable rear upper arms and enjoy. Notching the holes will just make the bolts slip around in them.

[TokyoNights]

redneck mods,, haha .. Yea after thinking about it Im just gonna end up doing it right.

[LigouriRd]

Do you know that the rear camber is adjustable from the factory. There is an eccentric bolt at the inner attachment point of the rear upper control arm. Loosen the nut toward the front of the car then rotate the eccentric bolt to lengthen or shorten the upper arm. I bought adjustable control arms only to find out that I didn't really need them, of course I only droped like 1.2".

[TokyoNights]

Im dropping 2" on a s14...I think Im gonna get the adjustable arms in the group buy here..

[Bbandit]

yes mike.. get that.. instead of notching the holes.. you will use this car for autoX and drifts.. you want good quality chassis parts ... because you will abuse this car