sr20det bellhousing bolt sizes!!

[Eternal_240Sx]

I know how frustrating it is when you dont have these bolts for the bellhousing, i know i was so here are the sizes of bolts for the bellhousing

2 12mm x 1.75, 75mm each

1 10mm x 1.50, 90mm each

1 10mm x 1.50, 35mm each

4 10mm x 1.50, 65mm each

4 12mm x 1.75, 75mm each

So thats it, and always remember to use 10.9 grade bolts!!

[Demik]

UR such a life saver man!! i need help with these for the longest! time for a trip to my local harware store..

[redpanda13]

thanks for this. yes it helps me out so much.

[xavier240]

5 years later now i need it lol thnx for posting

[Danco29]

6 years later but never too late to say i love u for the info! no homo

[blink182house]

THANK YOU, you're a savior of time.

[two40guy]

i love you<3

[+Waldo+]

<3



msglngth

[ezza]

Nice one!

Now all we need is a guide on which ones go where ;)

[DanielT6]

So is that a total of 6 12mx1.75, 75mm, or were the last 4 a typo. Cuz that thread pitch won't fit in my driver side holes....

[bentmode360]

can anyone tell me what sizes go on the 3 top left ones on the bellhousing to engine? im missing those ones.

[n33sanz]

bringing this back from the dead but if anyone wants a nice and easy upgrade for their bellhousing or any bolts for that matter check this site out:

Titanium Fasteners, Titanium Bolts, Titanium Nuts, Dress Up Bolts (http://www.ballerbolts.com)
Nissan Performance Hardware Kits GTR / 350Z / 240SX (http://www.ballerbolts.com/nipefakigtr3.html)

[blue91]

Bringing it back a little bit with a first post to say no no no no nooooooooooo. I have waited three weeks to get the bolts from him, tried contacting him multiple times through e-mail and phone calls. Go ahead try to call the number and I guarantee you it will go straight to voicemail and the mailbox will be full. DONT ORDER FROM THEM!

[skids180]

who ever you are sir, 10 years later I salute you! you are a 100% life saver

[battery1882]

This was completely wrong information for s13 black top..

for s13 black top :

m12 x 1.75 68mm x2
m12 x 1.75 63mm x3
m10 x 1.5 76mm x2 (starter)
m10 x 1.5 60mm x3
m10 x 1.5 30mm x1

[Dboyizmlg]

Subscribed to this.
Never know it might come in handy.

[lucas240sx]

Bump
Keeping this for future use

[silverarrow27]

Subscribed as well. Thanks for bumping an old post.

[Ilya]

Keeping the theme alive, here is what I had to get for my 5 speed swap from nissan with PN:

Engine / Bellhousing Bolts

Bolts = 08131-0601A / 60mm length / 4 needed

Washers = 08915-2401A / 4 needed

Bolt = 08131-0701A / 70mm length / 1 needed

Washer = 08915-2401A

Bolts = 08124-0301F / 35mm / 2 needed

Nuts = 08911-2401A / 2 needed

Bolt = 08124-0601F / 65mm / 1 needed

Nut = 08911-2401A / 1 needed

Bolt = 08071-0251A / 25mm / 1 needed

Starter Bolts = 01121-03751 / 95mm / 2 needed

Mitsubishi shift knob MR263906 16.95

Lower SHift boot 32862-V5001

shift boot 96935-40F10

Just in case

[cured13]

^and that's for KAde 1989, right?

[silverarrow27]

^and that's for KAde 1989, right?

No such thing as 1989 ka24de, so, no you're not right.

[cured13]

^finally some useful info. Thank you!

[Ilya]

Sorry, that was for a ka24de for a 92. But all bell housings are the same since you can put a 89 transmission on a 98 KA.

[ov1989]

L i f e s a v e r !

[godrifttoday]

https://m.ebay.com/itm/Transmission-Bolt-Kit-for-Nissan-SR20DET-SR20DE-S13-S14-SR20-SR-Starter-Bolts-/182115003554?hash=item2a66e66ca2%3Ag%3AR-AAAOSwiYFXJjJ9&_trkparms=pageci%253Aee329588-ad79-11e7-b703-74dbd180c2f8%257Cparentrq%253A04b4e81c15f0abc10c5a 9faafffd1fa0%257Ciid%253A1

[sidewaysil80]

woukd the kit above work with redtop sr and any 5spd sr trans?

[derass]

This thread is full of good info, so here's some more:

This is from the S14 200SX FSM (5-spd SR20DET). Also applies to S13 5-spd SR transmission:

https://i.imgur.com/L57IXbt.png