Brand New set of Drift Freaq KA/SR/CA Engine & trans mounts

[drift freaq]

yup here they are 80 durometer track tested high quality poly urethane engine and trans mounts. There is a link in my sig that will take you to a multipage reveiw. Lots of people here are using my mounts.

They come with a one month warranty against possible defects in manufacturing. If you are using them in motorsports then like any other product sold for motorsports there is no warranty .


The studs do not run straight through the center of these mounts unlike other brands.
You will not get any excessive vibrations from these because of this.
You will get mounts that are better than Nismo and do not rattle your teeth.

The trans mount has exhaust hanger studs!! It also improves your shifting because your transmission no longer moves around under your shift lever like stock. Because of this you get a the effect of having a short shifter without really having one. The shift lever goes straight into its gates quickly and with less effort.



You need to use a heat shield or a heat wrap on the exhaust/turbo side of the engine.
I also should point out that the nuts that are provided are nyloc which means you do not need to torque them down hard. A hand wrench is fine for tightening them. Do not use an air ratchet or impact gun.

Here is a Brand New set of the Greens which are the latest design. $120 ea.( for trans or engine mounts only) or $230( engine and trans) for the set picked up. $136 ea. shipped or $249 shipped for the full set. my paypal is [email protected]

http://i705.photobucket.com/albums/ww52/driftfreaq/IMG_0364_zps1923722b.jpg

[mr.nismo.]

bump for the legit mounts. held up in the KA in the malibu canyons and outlasted it. we'll see how they hold up to the sr ;)

[drift freaq]

bump for the legit mounts. held up in the KA in the malibu canyons and outlasted it. we'll see how they hold up to the sr ;)

they should be fine with your SR just remember to use a Heat shield on the exhaust side. Oh and that means if you use heat wrap do the top side as well.

[Driftwire]

If my motor starts and runs okay next weekend when it goes in, youll be seeing some money from me. +1 for great Mounts! MUST HAVE

[240sxDavid]

If financial aid comes through febuary 3 I will pick up a set for my single cam :D

[drift freaq]

sounds great guys.

[s13love-green]

I got some of ur mounts already n need a trans mount
How much ??? Shipped to Fullerton

[240sxDavid]

Financial aid came through so I want a set, where in socal are you located?

[drift freaq]

Financial aid came through so I want a set, where in socal are you located?

I am in Los Angeles right next to Griffith Park.

[drift freaq]

last official bump.

[IROYLE1]

Can you post pics of better explanation of what needs to be heat shield'd?

[drift freaq]

Can you post pics of better explanation of what needs to be heat shield'd?

I believe there are pics of a heat shield mount in the review thread. Do you have stock engine mounts? You should have a factory heat shield on the top of the exhaust side mount unless someone has discarded it.

The heatshield was put there to protect the factory mount from heat from the exhaust. This is what you need to do on my mounts as well. Either a metal heat shield that bolts to the top of the mount and bends down around it. Or heat wrap around the sides and top of the mount.

[Ziptietech]

I need these mounts!!!!

[mr.nismo.]

Can you post pics of better explanation of what needs to be heat shield'd?

just go to lowes and get sheet metal and make one, mine half circles the mount and bolts with the top stud on the motor mount, been working great for me

[IROYLE1]

Im doing my 5 speed swap and wanna replace all of the disposable components. Im adding everything up and hope i can fit a set of these into my budget. lol. thanks guys.