xpertsnowcarver's Last S13 Build PART OUT - S15, R33, HKS, Tomei, AEM, Nismo, Tanabe

[xpertsnowcarver]

Parting out my last 240. Chassis and engine have sold already, so I'll be plucking parts off as the sale goes.

Any questions? Post here, so everyone can see.
Any offers? PM me, and I'll give you shipping quotes and counter offers.

There might be something in the pictures I haven't listed, so feel free to ask.

Bundle stuff together and get a fatter discount and cheaper shipping. Local pick-up and Cash is even cheaper.

ALL PRICES ARE OBO. So throw me offers.
SHIPPING AND PAYPAL FEES NOT INCLUDED

Z32 N62 MAF (cut for coupler) w/ New Pigtail
90.00

JGY Top Feed fuel rail. Fits OEM and Greddy S13 SR Manifolds
90.00

JGY/MSD Top Feed 96lb 2ohm (1000cc) injectors
200.00

AEM Analog Oil Temp Sensor and Gauge
120.00

AEM EGT Sensor BRAND NEW
140.00

Hicas Rear Sway Bar (Comes with custom white C-Pillar Brace)
40.00

White Chuki Side Extensions 50.00

Canadian DTRLs 150.00

Key Ring Illumination 10.00


JIC Inner Tie Rods with OEM S14 Tie Rod Ends for
130.00 SOLD

S15 Spec-R Turbo w/ Inconel Studs (Less than 3k miles of use)
500.00 SOLD

HKS Wastegate Actuator (Less than 1000 mi of use)
105.00 SOLD

HKS BOV Authentic Type IV
150.00 SOLD

Tomei Expreme Exhaust Elbow
100.00 SOLD

Invidia Downpipe WILL NOT SHIP
60.00 SOLD

HKS Sport Legalis Cat-Back Exhaust WILL NOT SHIP
120.00 SOLD

Tomei Type S FPR w/ gauge, SARD fuel rail adapter, and custom hose
100.00 SOLD

Custom oil cooler Kit
Will Not Break Apart
520.00 SOLD
-Tomei N2 Oil block
-Setrab Cooler
-Oil Filter Relocation Block w/ Mobil1 Filter
-Custom Lines

Custom intake w/ HKS Mushroom
60.00 SOLD

AEM EMS Series 1 for S13 Blacktop (96-98) 30-1602
Will Not Break Apart
1000.00 SOLD
- GM 3Bar MAPS
- GM AITS
- GM WGS
- AEM Wideband Gauge (Sensor NOT included)
- AEM CAS Disk

Powered By Max Tension Rods
130.00 SOLD

Tanabe D Spec Front Sway Bar
140.00 SOLD

R33 GTST Brakes 480.00 SOLD
- DBA4000Series Rotors
- SS Lines
- Hardware and Pads


Z32 Rear Brake Calipers
290.00 SOLD
- Z32OEM Rotors
- Z32OEM Assemblies
- R33Handbrake Cables w/ brackets
- SS Lines

Z32 BMC 90.00 SOLD

Ichiba 5 Lug Conversion 280.00 SOLD

350Z Wheels WILL NOT SHIP 330.00 SOLD

Mines FSTB 120.00 SOLD

GTSpec Trunk Brace
120.00 SOLD

DCSports RSTB 120.00 SOLD

S15 Steering Wheel 130.00 SOLD

S15 Autech Seats WILL NOT SHIP 550.00 SOLD


S15 HLSD. Incl output shafts. 4.083. Nismo Ring Gear Bolts and New Seals
460.00 SOLD

S15 VSS Diff Pumpkin
80.00 SOLD

GTIR ITBs 260.00 SOLD

Kognition Carbon fiber Brake Ducts
240.00 SOLD

Blitz Muffler 80.00 SOLD

ADVAN RA3-DT 18x10+19 5x114.3 with PBM Lug Nuts
WILL NOT SHIP 1300.00 SOLD

Nismo Power Brace
120.00 SOLD

Sparco 4 Point Standard Buckle Harness
70.00 SOLD Each

I'm just going to put a gang of random pictures I saved on photobucket over the years of stuff thats on this list. EVERYTHING IS USED UNLESS OTHERWISE NOTED, so some of the pictures will show that I bought pretty much all these parts new.

http://img.photobucket.com/albums/v731/XpertSnowCarver/240%20build/cdnispb1.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/IMG_20121026_154900.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-05_12-46-52_289.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-05_12-47-08_418.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-05_12-41-30_976.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-05_12-41-11_650.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-05_12-41-01_366.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-05_12-39-29_481.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-05_12-38-52_238.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2012-10-31_17-06-32_477.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2012-10-29_21-00-44_343.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2012-10-29_21-00-33_573.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2012-10-29_21-00-23_279.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2012-08-15_21-29-38_168_zps29809d0e.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2012-08-14_19-47-59_256_zps0559cc2b.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2012-08-13_16-35-46_509_zps33e93032.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2012-08-13_16-35-06_72_zpsd156c7e3.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2012-06-22_15-40-41_806_zps65602c71.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2012-06-22_15-40-27_50_zps2f81f9bb.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2012-06-22_15-40-09_23_zpsfa78895f.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/build/1017090019.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/build/IMG_0884.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/build/IMG_0902.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/build/IMG_1239.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/build/IMG_1382.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/build/IMG_1418.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/build/IMG_1463.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/build/026.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/build/018.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/build/145.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/1014101958_01.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/1014101957_01.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/0515101804a.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/0515101736.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/0425101310-1.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/0427102016.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/0427102016a.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/0424101857.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/0425101310a.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/0424101308.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/0424100900.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/0424100900a.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/0421101048.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/0226001033a.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/005.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/008.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/043.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/0929091809.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/0929091809a.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/0920091716.jpg

[xpertsnowcarver]

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/0920091717.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/007.jpg

http://i561.photobucket.com/albums/ss56/xpertsnowcarver3/014.jpg

http://i1166.photobucket.com/albums/q606/xpertsnowcarver4/2012-08-13_16-35-46_509.jpg

http://i1166.photobucket.com/albums/q606/xpertsnowcarver4/172999_182584731785899_5763227_o_zpsb3d1482c.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-06-59_236_zps470a3054.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-07-09_572_zps3fbbb298.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-07-18_707_zps1a2bb209.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-07-43_1_zps32dd2048.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-09-20_55_zps53b71726.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-09-48_725_zpsc4ed635e.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-10-23_259_zpsd067114e.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-11-09_62_zps958cc165.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-11-22_662_zps32e04538.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_17-11-36_850_zps11b7965f.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_17-11-20_757_zps86be0b7a.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_17-10-45_810_zpsa0522876.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_17-10-32_365_zps5c9c85f5.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-12-38_351_zps43146707.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-12-30_768_zps04f32634.jpg

http://i1166.photobucket.com/albums/q606/xpertsnowcarver4/176262_179659235411782_4665614_o_zpsb6f8ad2c.jpg

[jp69]

Pics of the exhaust

[xpertsnowcarver]

http://i1166.photobucket.com/albums/q606/xpertsnowcarver4/176239_179658338745205_226734_o_zps7a8a6e1c.jpg

The exhaust has some dings on the bottom side of the muffler and a leak on the side near the bracket. It is the quietest 3" stock-looking exhaust. The exhaust tip is 83mm instead of the average 100mm.

[hionpsi]

Good stuff bro. Ill hit you up soon

[wangan_cruiser]

those are really good price. wish you were local

[andisan]

Good prices, will keep you in mind as soon as that tax return check is here ;)

[Wake]

Damn I want that RSTB, or I could sell my DC front and buy something else altogether.

[s13-ghost]

300mbc 1"?

[ghost_silvia]

Sparco harnesses and rear strut bar shipped to 78634?

[Jake1992]

R33 GTST Brakes brake setup shipped to 33186? can you pls pm me on that ..

[d_nice]

damn good parts here..once i get taxes also ill be here

[sw20>>s14]

I'd be ALL OVER those seats if you were local. Bump for some good shit and legit seller!

[jjjawberg]

i know its not listed but, do you have the front z32 brake assembly? or coilovers?

[xpertsnowcarver]

Thanks fellas

300mbc 1"?

It is the bigger 17/16" ( 1 1/16")

Sparco harnesses and rear strut bar shipped to 78634?
R33 GTST Brakes brake setup shipped to 33186? can you pls pm me on that ..

Ill look it up and get back to you guys

i know its not listed but, do you have the front z32 brake assembly? or coilovers?

I only have r33 brakes for the front. And all coilovers have been sold.

[[email protected]]

Joel, just sent you a text. I want that exhaust :)

[jjjawberg]

are they 30mm?

[Adam496]

Nismo power brace available

[xpertsnowcarver]

are they 30mm?

Yes. R33 rotors are 30mm wide.

Nismo power brace available

All parts are available until I update the thread saying otherwise.

[Adam496]

Price? I didnt see it .listed?

[xpertsnowcarver]

Price? I didnt see it .listed?

Oh sorry about that. I thought I had it listed. Thank you for pointing that out.

Updated original thread

Nismo Power Brace (120.00OBO)
Sparco 4 pt Harness (70OBO Each)

I reply to PMs rather slowly due to the shipping estimates, so I will reply as soon as I am able. Thank you for your patience.

Also, nothing is sold until the cash hits my hand (or gets in my paypal). Sorry, nothing personal. First come first serve. No dibs. Its hard to keep track of it. Also, I am very candid about the condition of everything, so I won't bother with refunds. Lastly, if you're spending more than $200, I'm going to add insurance to the shipping charges.

[oaksman513]

Pm sent on the Silvia's wheel!

[leung]

What heatshield is that? Is it for sale? Killer deal on that exhaust

[boost addict]

Someone buy the rear 5 lug from this man so I can buy the fronts!

[RP El Fresco]

Pm sent 5lugs power braces n elbow link money on hand pick up today 3232757175

[EvilEgg13]

How many miles on the injectors? And Im guessing they dont come with resistors?

[jayrawr]

Where you located? I want the Nismo power brace.

[joshchewuhh]

^^^^too bad cousin! its mine!! muahahaha picking it up friday :3

[1gr8bar10der]

Subscribed to this thread so I can find it later lol

[psychos13]

pix of blitz muffler

[xpertsnowcarver]

Thanks guys

Some are asking how well my engine was performing. I achieved 300wtq (3800-4000) 300whp (6700-6800) at 14.8psi tuned on E85
S15 turbo w/ smic, tomei elbow 3" exhaust
1000cc injectors, walbro,
AEM w/ MAP, AIT, WGS
Aprrox. 9.2:1 CR
Oem intake manifold, exhaust manifold

What heatshield is that? Is it for sale? Killer deal on that exhaust

Heat shield is long gone, but Thank you!

How many miles on the injectors? And Im guessing they dont come with resistors?

I used them for... maybe 2000 miles. They do not. But its no big deal. They only cost $1.21 each from radio shack. (10 ohm 10 watt ceramic resistor: 10W010 10 Ohms Cermet Power Wirewound Resistor : Resistors | RadioShack.com (http://www.radioshack.com/product/index.jsp?productId=12566075&filterName=Type&filterValue=10-watt+resistors))

pix of blitz muffler

I will take a picture, update the thread with it, and let you know. Thank you

[xpertsnowcarver]

Was asked for some more pictures of the turbo and actuator. Also adding pictures for the Kognition Brake Ducts

Even though the HKS WG Actuator shows a manufacture sticker of 2011/12 on it. It was purchased within the last five months. Used within the last three.

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-06-59_236_zps470a3054.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-07-09_572_zps3fbbb298.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-07-18_707_zps1a2bb209.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-07-43_1_zps32dd2048.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-09-20_55_zps53b71726.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-09-48_725_zpsc4ed635e.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-10-23_259_zpsd067114e.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-11-09_62_zps958cc165.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-01-31_16-11-22_662_zps32e04538.jpg

Edit: Actually... I should put these near the original post..

[mightys88]

Rear subframe spacers?

[xpertsnowcarver]

No, the subframe spacers are no longer available.

[xpertsnowcarver]

pix of blitz muffler

Im sorry. I was digging though my PMs wondering who the heck was asking for pics. Then I realized you asked on the thread haha.

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-02-01_16-31-49_171_zps56bc8723.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-02-01_16-32-06_609_zpsa2b97ef0.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-02-01_16-32-52_468_zpsf76e4b0a.jpg

http://i7.photobucket.com/albums/y274/xpertsnowcarver2/2013-02-01_16-33-18_185_zpsaae01eef.jpg

The way I welded it and had it mounted was right after the downpipe where the cat sits. Here are a couple youtube videos. The sound was just too awesome, and the exhaust flow was just perfect for my setup when I had it tuned.

Auto Club Speedway - S13 Autech Spec-S (Additional Footage) - YouTube (http://www.youtube.com/watch?v=esqMv0hRNPM)

S13 Autech Spec-S vs 300ZX Time Trials Battle! - YouTube (http://www.youtube.com/watch?v=KrEIKQZfXRs)

I don't recommend running this on the street though... Its pretty damn loud. Haha

[Jake1992]

sux i was waiting on a pm about shipping on r33 brakes.. now sold ..

[xpertsnowcarver]

Im sorry Jake. I looked through all my PMs for your screenname, and I am unable to find it.
Best Regards

As for everyone that has made a purchase with me, i just picked up several boxes, so I hope to start shipping items out beginning Tuesday. Ill be sure to communicate with anyone about any delays. I am a bit overwhelmed by the number of PMs I get daily, so thank you for your patience. Wishing everyone a fun (super bowl!) weekend.

[Jake1992]

Quote:

Originally Posted by ghost_silvia
Sparco harnesses and rear strut bar shipped to 78634?

Quote:
Originally Posted by Jake1992
R33 GTST Brakes brake setup shipped to 33186? can you pls pm me on that ..

"Ill look it up and get back to you guys"

it happens and i understand that your box would of been full thats why i replied in here... maybe you could pm me a good deal on that oil cooler i am in need of one but was not my priority right now...

[urk]

Interested in the S15 VSS diff pumpkin. Is the VSS still on the diff?

[xpertsnowcarver]

Quote:

Originally Posted by ghost_silvia
Sparco harnesses and rear strut bar shipped to 78634?

Quote:
Originally Posted by Jake1992
R33 GTST Brakes brake setup shipped to 33186? can you pls pm me on that ..

"Ill look it up and get back to you guys"

it happens and i understand that your box would of been full thats why i replied in here... maybe you could pm me a good deal on that oil cooler i am in need of one but was not my priority right now...

Just sent a PM!

Interested in the S15 VSS diff pumpkin. Is the VSS still on the diff?

Yes! Btw, I am also including some aluminum bushings I machined myself. I didn't have an opportunity to test fit them though, so thats why Im throwing them in. I need to remember to take some photos of that too..

[urk]

Are you willing to ship the diff pumpkin. If so PM me a price shipped to 85364 please.

[xpertsnowcarver]

^^Your inquiry has been answered!

Update for those that have made a purchase with me so far.

I have finally purchased a truck! Pretty stoked about it. So, I can finally begin to take her apart. Parts such as the turbo, brakes, suspension links, and other necessities may not be shipped until after Thursday. Aesthetic parts such as the steering wheel, seat harnesses, strut bars, may be shipped on Tuesday. Your item is considered shipped when I PM you with the confirmation/tracking number! So, if you bought something and you are getting concerned that I have not communicated with you recently, please BY ALL MEANS kick my butt around with some PMs to make sure I haven't forgotten anyone. I'll do my best to get everything out as soon as possible.

With that said, big thank you so far to those that have bought something from me. The OP has been updated.

[Nashville91s13]

Chest bump for this dude being a great seller. Buy his stuff yo!

[shanelach]

Sent you a pm yesterday.

[xpertsnowcarver]

Sent you a pm yesterday.

Sorry about that. So much to do and with such ample time, but I finally replied.

Shipping Update
Only had enough time to make a shipping label for one item, which was the GTIR ITBs.

The car is currently being disassembled. So I will continue removing parts tomorrow and resume printing shipping labels Wednesday night, so expect an update then!

Thank you :)

[Kodykinns]

How much for the walbro? Pm me price please

[xpertsnowcarver]

How much for the walbro? Pm me price please

Sorry, I sold Walbro with the chassis.

[xpertsnowcarver]

S15 Steering wheel, Sparco Harnesses, and PBM Tension Rods are boxed for shipping, so please, no more PMs regarding these, or anything saying SOLD on it. Take a second to read the thread because I dont have time for redundancy. So, I will start ignoring PMs regarding parts saying SOLD.

As for those of you who purchased brakes, hubs, or engine components. I will get back to preparing those for shipment and pictures tonight, tomorrow, and Friday. I should be caught up with all inquiries, payments, and shipments by the weekend. Thank you for your patience.

[Rb26kouki]

S15 shift knob for sale ?

[xpertsnowcarver]

S15 shift knob for sale ?

Shift knob has been sold.


UPDATE: OP has been updated. For those waiting on shipments. I am caught up for the most part. (Blair, I will be stopping by UPS store in a moment to be sure the documentation is correct and in order.) Thank you for your patience.

I am adding Tein Inner Tie Rods with OEM S14 Tie Rod Ends for $120 OBO (shipping not included).

[sw20>>s14]

Dang I see the seats sold. My fault for forgetting to get back to you. I was planning a trip down and should have texted you back, but no worries. Thanks for the effort!

Bump for Joel. Beyond legit seller!

[xpertsnowcarver]

Dang I see the seats sold. My fault for forgetting to get back to you. I was planning a trip down and should have texted you back, but no worries. Thanks for the effort!

Bump for Joel. Beyond legit seller!

Hey Brian no problem, but thank you for your understanding and working with me.

Update: As of right now, all items paid for and pending shipment have now been taken care of. I am pretty sure I've sent everyone their tracking numbers, but if you have not received a tracking number, I apologize. Please PM me when you can!!

[xpertsnowcarver]

Come on guys; read the original thread. I'm ignoring PMs because what is sold says SOLD. I update the orginal post frequently. What does NOT say sold is available until (anybody's) cash hits my hand (or paypal). If a down payment is made, I will note it accordingly.

What is still available?
Tein Inner Tie Rods with OEM S14 Tie Rod Ends for
130.00

HKS BOV Authentic Type IV
170.00

JGY Top Feed fuel rail. Fits OEM and Greddy S13 SR Manifolds
90.00

JGY/MSD Top Feed 96lb 2ohm (1000cc) injectors
200.00

Custom oil cooler Kit
Will Not Break Apart
520.00
-Tomei N2 Oil block
-Setrab Cooler
-Oil Filter Relocation Block w/ Mobil1 Filter
-Custom Lines

AEM Analog Oil Temp Sensor and Gauge
120.00

AEM EGT Sensor BRAND NEW
140.00

Tanabe D Spec Front Sway Bar
140.00

Hicas Rear Sway Bar
40.00

350Z Wheels WILL NOT SHIP 320.00

DCSports RSTB 120.00

Chuki Side Extensions 50.00

Canadian DTRLs 170.00

Key Ring Illumination 10.00

Kognition Carbon fiber Brake Ducts
240.00

Blitz Muffler 80.00

ADVAN RA3-DT 18x10+19 5x114.3 with PBM Lug Nuts
WILL NOT SHIP 1300.00

Z32 maf (cut for coupler)
80.00

Js Racing Forged Steel Lug Nuts
60.00

Today I am meeting with two individuals regarding the injectors, fuel rail, oil cooler, and AEM stuff. Still waiting on one person regarding the ADVAN wheels.

[dizzariot]

THOSE AUTECH SEATS. I'm too late :((((

[2LiterTurbo]

Did any of the 2 people take the oil cooler or AEM Gauges? PM me

[xpertsnowcarver]

The oil cooler is still available. Many say they are interested.. but I haven't seen any money!

The only AEM gauge I have available is the analog oil temperature gauge. Comes with harness and sensor.

[PowerDrifter]

http://i1166.photobucket.com/albums/q606/xpertsnowcarver4/176239_179658338745205_226734_o_zps7a8a6e1c.jpg

The exhaust has some dings on the bottom side of the muffler and a leak on the side near the bracket. It is the quietest 3" stock-looking exhaust. The exhaust tip is 83mm instead of the average 100mm.

how much for the brown or black exhaust?

[xpertsnowcarver]

how much for the brown or black exhaust?

Both of those exhausts have already been sold.

[ov1989]

interested in a couple stuffs

[Souljahzs13]

Might be interested in the Kognition brake ducts. How are they installed?

[sidewayz 240]

bump! pm'd you on the blitz exhaust

[xpertsnowcarver]

Might be interested in the Kognition brake ducts. How are they installed?

They fit right behind the rotor and the hub/bearing and only fit Z32, R32, R33, R34 brake setups.

bump! pm'd you on the blitz exhaust

Sorry dude. Just sold her. OP updated.

[macef9]

bbbimp!!!!!

[looneys14]

I need the conversion lines for the calipers and the rotors also like that Silvia steering wheel??


Sent from my iPhone using Tapatalk - now Free (http://tapatalk.com/m/)

[looneys14]

How much for the z32 rotors an are the 26 or 30mm?


Sent from my iPhone using Tapatalk - now Free (http://tapatalk.com/m/)