FULLY BUILT SR20DET Complete engine swap package 500+whp!!

[ForeignMuscle]

This is a complete turn key package. Engine, harness, transmission, everything.

If you like what you see give me a free bump please!!!

This engine is built like a brick house. It was machined and assembled by Dennis Mitchell of Mitchell Racing Engines in Huntsville, Alabama. I have put 1200 miles on it. It is fully broken in and runs like a beast. I changed the oil 4 times in 1200 miles. I did not skimp on one single part of this engine. Every thing is top of the line and everything was done right the first time. This engine is absolutely ready to go. It is very daily driver friendly and also very capable of serious power.

The price: $6000 FIRM OR TRADE FOR 250 OR 450 MX DIRTBIKE PLUS CASH!


I WILL NOT PART OUT.

I will ship the engine anywhere in the continental United States for $200-300.

Here is a list of everything that was purchased for this build.

The tune is JWT's 700hp program. It utilizes their ECU (tuned for 91/100 octane, no speed limiter, 7850rpm limit) Ford Lightning MAFS, and MSD 96lb injectors.

The engine is on a factory tune for break in, but the JWT system is included and ready to go.

Engine
• CP pistons (86.5mm, 8.5:1 CR) $500
• Manley H-beam rods $350
• ACL race bearings (main, rod, thrust) $125
• OEM crankshaft $650
• OEM front and rear main seals $40
• OEM oil pump and front cover $260
• Machining and assembly by Mitchell Racing Engines (+.020 w/ torque plate) $580
• Tomei 270° cams (hydraulic) $300
• OEM timing chain $50
• GTiR main bolts $60
• Apexi head gasket (87x1.1mm) $230
• ARP head studs $150
• S14 oil pick up $25
• OEM pick up gasket $5
• Moroso oil pan $300
• OEM exhaust manifold gasket $30
• OEM upper oil pan $100
• Coolant temp sensor $15
• OEM intake manifold gaskets $40
• OEM flywheel bolts $50

Exhaust System (All exhaust hardware is drilled. It will all be safety wired, aircraft style. FAA approved:))
• DEI titanium exhaust wrap $50
• Summit Racing stainless lock ties $25
• Hybrid Dynamics top mount manifold $700
• 3” SS piping (downpipe) $50
• T31 to 3” vband adapter $60
• SS 3” vband flange $30
• Mild steel 3” vband flange $20
• 3” vband clamp $20
• ATP dump tube $75
• ATP stainless tube for dump $25

Induction
• Precision CEA 5858 $900
• -3AN turbo feed fitting $20
• Turbo drain flange $30
• Turbo drain gasket $5
• Precision 46mm wastegate $400
• HKS SSQV bov $175
• HKS bov flange $25
• AEM Dry Flow filter and pre filter $100
• ’01 Ford Lightning MAFS $200
• Silicone boots and t-bolt clamps $100
• OEM throttle body gasket $5

Fuel System
• MSD 96lbs injectors $500

Plumbing (Earl’s Swivel Seal forged ends, Perform-o-flex hoses, and weld-on bungs)
• AN fittings welded to block and valve cover $50
• PCV mod (-10) $200
• Turbo feed w/ XRP Fyre Foil (-3) $100
• Turbo drain w/ XRP Fyre Jacket (-10) $100
• Nissport oil pressure multi-port $60
• ½”BSPT to ½”NPT fitting (oil return to block) $15
• ½”NPT to -10AN straight $6
• ½”NPT to -10AN 45* $8
• -6AN cap $15

Fasteners
• ProBolt 10x1.5x25mm Race Spec (x4, turbo inlet) $40
• ProBolt 8x1.25x25mm Race Spec (x4, turbine discharge) $35
• Probolt 8x1.25x30mm Race Spec (x2, turbo oil drain flange) $30
• OEM exhaust hardware: “The Worx” (PDM-Racing) $200
• OEM cam cap bolts $50
• OEM valve cover hardware $75

Drivetrain
• B&M short throw shifter $200
• DIF SS clutch line $50
• Mallory heat sleeve (clutch line) $25
• OEM slave cylinder $50

Electrical
• Jim Wolf Technology ECU (91octane, ’01 Lightning MAFS, MSD 96lbs injectors) $600
• OEM 12mm Ti. O2 sensor (12mm) $70

TOTAL= $9754 +1500 (original redtop engine and transmission)

$10854




http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-21354-1357449615368.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-12760-1357089610172.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-24949-1356735821766.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-46396-1356735792129.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-44525-1356037408307.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-24988-1356037135645.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-13018-1351879747775.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-8230-1351382780507.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-7479-1351027778056.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-38034-1354080624817.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-53201-1354327974130.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-21723-1354391362363.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-12474-1355205907523.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-40058-1356563092727.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-24875-1356920233862.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-27888-1356920266142.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-58554-1356920907898.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-48153-1357449604003.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-39869-1357449533225.jpg

[ForeignMuscle]

Anybody's income tax money burning a hole in their pocket yet???

[240Lover770]

safety wiring like a beast. i work on aircraft also. free bump

[ronje14]

whoaaa!!!! thats a beauty. bump for you sir

[ForeignMuscle]

I will sell the complete longblock for $4,000!! Everything included except intake and turbo sides.

[NINE]

Dang, would love to have this.

Do you happen to have any video's of the motor running? Thanks

[ForeignMuscle]

I can shoot a video for any serious buyer.

[ForeignMuscle]

Tomei 270° cams added.

[slow92]

Free bump for you

[ForeignMuscle]

UPDATE: I will trade for a factory sr20det plus cash!!

[jr_ss]

Still have that torque plate?

[ForeignMuscle]

jr_ss, I used JDSPerformance I believe. I wish I would have purchased one, but at the time I didn't think that I would use it enough to justify it.

It was right around $100 for one week in my possession.

What are you building now??

[jr_ss]

jr_ss, I used JDSPerformance I believe. I wish I would have purchased one, but at the time I didn't think that I would use it enough to justify it.

It was right around $100 for one week in my possession.

What are you building now??

I'd like to build a bit stronger bottomend for the VVL and have it as a back up incase anything should happen to my current bottomend. 9:1 VE CP's, Spool racing rods, and custom Kelfords when the time comes. You know that never ending quest for power...

[ForeignMuscle]

Looking at adding a Competition Clutch twin plate. Price will go up $1000 when it is ordered.


Any interest at all on here for a serious race engine???

[Adam.G]

Bump. Wish I could have the money.

[ForeignMuscle]

I need to get this sold!!

[ForeignMuscle]

$6000 FIRM

I need a work truck as well as money to finish my degree.

Price is absolutely bottom dollar. I am asking half the price that I just put into this motor over the last 3 months. Built like a brick shit house.

I'm giving it until the end of February to sell or I'm going to have to keep it. It's killing me to try and give this thing away.

[Jake1992]

Free bump , as i still want your turbo setup :D

[dluevanos01]

Bump for you sir.
I have the stock SR but no money! you don't happen to be looking for a kidney, do you?

[bamaboy123]

Bump for a legit dude! Bought stuff from him locally. Cool guy.

[ForeignMuscle]

Bump for you sir.
I have the stock SR but no money! you don't happen to be looking for a kidney, do you?

Haha, I'm not due for a replacement yet that I know of.

Bump for a legit dude! Bought stuff from him locally. Cool guy.

Hey man thanks!

I'm ordering a top feed fuel rail and Tomei fpr at the moment.

Lots of people offering this or that, but I have yet to speak with any one who has the cash to talk.

[import_z]

bump for your setup!

[hobbs]

Bump for an awesome setup!

[Lindsay Lohan]

i like your hat

[Lindsay Lohan]

i like your hat.

[dluevanos01]

Haha, I'm not due for a replacement yet that I know of.

If you do, just let me know! aha Bump for you sir.

[S13yeahbuddy]

Damn that's beast I wish I had the money

[Victorious]

very nice setup

[Shouldahadav8]

I also work on aircraft , bump for a descent safety wire job...LOL

[b4l]

I see sensors missing. are you including the sensors on it

[turboS14kid]

is this still up for grabs pm me. i cant pm you for some reason.

[mantas]

Bump for you sir.
I have the stock SR but no money! you don't happen to be looking for a kidney, do you?

We can work something out. PM me i got a buyer for the kidney....hahaahha

[-SpOoLiN-]

What kinda mx bike you looking for?