The "BIGGEST" SR20DET Parts Sale Ever! 75 Pictures! Must LOOK!!!!

[s13 drifta]

Hi, I am listing all my sr20det parts that I no longer need. If you see anything you are interested in please post or send me a PM. Prices do not include shipping, please leave zip code for quote. I accept paypal and ship fast.

S13 blacktop head (comes with cam caps, cam cap bolts, valve cover studs, valves, springs, retainers, guides, and seals all assembled)-SOLD
http://imageshack.us/a/img10/227/sr20parts058.jpg

OEM head bolts w/ washers-$20
http://imageshack.us/a/img571/2821/sr20detparts028.jpg

S13 cams-$70 for pair
S13 cam gears-$30 for pair
http://imageshack.us/a/img714/7574/020uqk.jpg

Oil feed tubes-$30 for pair
http://img837.imageshack.us/img837/1949/022ok.jpg

Rocker arms-$80 for set of 8
http://imageshack.us/a/img685/6640/227md.jpg

S13 blacktop valve cover w/ T and PCV valve-$70
http://imageshack.us/a/img705/6739/sr20detparts003.jpg

Valve cover T-$5
http://imageshack.us/a/img838/8729/sr20detparts032.jpg

S13 coil pack cover-SOLD
http://imageshack.us/a/img856/4781/sr20detparts004.jpg

OEM oil cap-$10
http://imageshack.us/a/img5/6572/sr20detparts005.jpg

OEM timing cover / oil pump-$80
http://imageshack.us/a/img198/7158/sr20detparts001.jpg

OEM timing chain kit (complete)-SOLD
http://imageshack.us/a/img7/9135/sr20detparts036.jpg

Timing chain tensioner-$30
http://imageshack.us/a/img594/6937/sr20parts034.jpg

Crank / oil pump collar-$10
Crank pulley bolt w/ washer-$10
Lower timing chain gear-$10
http://imageshack.us/a/img844/4458/sr20detparts034.jpg

S13 pulleys
P/S pulley-$15
Water pump pulley-$10
Alt. pulley-$10
http://imageshack.us/a/img820/7556/sr20detparts035.jpg

OEM water pump-SOLD
http://imageshack.us/a/img543/6623/sr20detparts007.jpg

OEM KA/SR thermostat-SOLD
http://imageshack.us/a/img571/5083/sr20detparts033.jpg

Thermostat housing-$20
http://imageshack.us/a/img825/2519/004ju.jpg

Temp sensor housing-$20
http://imageshack.us/a/img689/7564/002qlun.jpg

Temp sensor harness-$20
http://imageshack.us/a/img542/4305/sr20detparts017.jpg

Water outlet-$30
http://imageshack.us/a/img39/6253/016jb.jpg

Water inlet-$20
http://imageshack.us/a/img707/636/003gdh.jpg

S13 intake manifold-$40
http://imageshack.us/a/img832/8123/004nsh.jpg

Intake manifold brackets-$20 for all 3
http://imageshack.us/a/img585/4889/017ur.jpg

PCV valve to intake lines-$20
http://imageshack.us/a/img198/4153/sr20detparts018.jpg

Coolant lines under intake manifold-$30
http://imageshack.us/a/img17/7504/sr20parts049.jpg

S13 throttle body w/ auto TPS-$60
http://imageshack.us/a/img802/2788/005te.jpg

Auto TPS-$30
http://imageshack.us/a/img687/5779/sr20detparts014.jpg

S13 fuel rail-$30
http://imageshack.us/a/img820/4201/sr20detparts037.jpg

FPR-$15
http://imageshack.us/a/img600/2258/014wxg.jpg

Mishimoto radiator cap-$15
http://imageshack.us/a/img855/38/sr20detparts022.jpg

S13 SR MAF-$70
http://imageshack.us/a/img210/7471/sr20detparts020.jpg

Apexi KA/SR MAF adapter-SOLD
http://imageshack.us/a/img6/6472/sr20detparts021.jpg

Q45 MAF-$50
http://imageshack.us/a/img402/8794/007wvx.jpg

OEM exhaust manifold-$40
http://imageshack.us/a/img52/6783/sr20parts020.jpg

7 layer exhaust gasket-SOLD
http://imageshack.us/a/img689/2350/sr20detparts008.jpg

OEM turbo elbow-SOLD
http://imageshack.us/a/img803/8038/012gb.jpg

EAI valve-$30
http://imageshack.us/a/img256/104/sr20parts025.jpg

Blacktop rods-$80 for all 4
http://imageshack.us/a/img811/6783/sr20parts020.jpg

Crank girdle-$40
http://imageshack.us/a/img845/3751/sr20detparts025.jpg

Main bolts w/ washers-$20
http://imageshack.us/a/img29/6623/sr20detparts026.jpg

Crank girdle baffle-$20
http://imageshack.us/a/img132/7057/sr20detparts027.jpg

Oil pickup / strainer-$25
http://imageshack.us/a/img191/417/002fye.jpg

Lower oil pan (some scratches and small dents)-$30
http://imageshack.us/a/img823/7664/sr20detparts029.jpg

Oil sending unit-$15
http://imageshack.us/a/img27/601/sr20detparts024.jpg

Oil dip stick w/ housing-$25
http://imageshack.us/a/img594/6633/sr20detparts015.jpg

Dip stick housing-$10
http://imageshack.us/a/img31/2764/sr20parts046.jpg

Knock sensor harness-$20
http://imageshack.us/a/img94/7347/sr20detparts016.jpg

Rear seal housing w/ seal (one tab broke)-$20
http://imageshack.us/a/img811/3140/sr20detparts010.jpg

SR engine flex plate-$40
http://imageshack.us/a/img5/9761/0113r.jpg

SR OEM flywheel (resurfaced then used for 5k miles)-$50
http://imageshack.us/a/img215/2948/002gyk.jpg

[s13 drifta]

SR flywheel bolts-$20 for all 8
http://imageshack.us/a/img820/9555/sr20detparts030.jpg

Exedy stage 1 clutch-$90
http://imageshack.us/a/img266/8482/001pen.jpg

Throwout bearing sleeve-$10
http://imageshack.us/a/img801/6954/sr20detparts031.jpg

SR 5 speed transmission-$280
http://imageshack.us/a/img193/3918/020ij.jpg

S13 complete manual driveshaft non abs-$120
http://imageshack.us/a/img577/3922/sr20detparts006.jpg

SR / KA engine brackets-$40 for pair
http://imageshack.us/a/img713/6458/014iqs.jpg

Skyline engine mounts (240sx upgrade, solid rubber)-$120
http://imageshack.us/a/img600/2118/003uco.jpg

J4 type x blacktop engine harness (complete and uncut)-$190
http://imageshack.us/a/img51/1895/007iu.jpg

J4 type x Intec tuned ecu with switchable tune (up boost, modified fuel and timing, no fuel cut, all bolt ons)-$200
http://imageshack.us/a/img831/1589/008vch.jpg

Ignitor chip-$70
http://imageshack.us/a/img826/9008/006loo.jpg

T28 wastegate-$30
http://imageshack.us/a/img600/5975/sr20parts010.jpg

T28/GT28 bottom mount turbo line kit (steel braided water lines, hard oil line, AN fittings, banjo bolts, and washers)-$60
http://imageshack.us/a/img189/3967/sr20detparts011.jpg

T25 water inlet line-$10
T25 oil feed line-$10
Water line banjo bolts-$5 each
http://imageshack.us/a/img10/213/sr20detparts038.jpg

DIF Goodridge T2 bottom mount return line-$40
http://img18.imageshack.us/img18/3470/sr20detparts009.jpg

T2 3 bolt compressor outlet-SOLD
T2 HKS 2 bolt compressor inlet-$30
http://imageshack.us/a/img715/8446/sr20detparts023.jpg

SR CAS (chipped plug, harness still plugs in)-$70
http://imageshack.us/a/img14/6971/082gj.jpg

Steel cold pipe-$50
http://imageshack.us/a/img543/6017/001bgyv.jpg

Vortech FMU 12:1-$80
http://imageshack.us/a/img824/7378/011eyh.jpg

Billet BOV w/ pipe-$40
http://imageshack.us/a/img809/5965/004xur.jpg

28x6.5x2.5 FMIC (little tweaked, still works good)-$30
http://imageshack.us/a/img28/9431/014gcz.jpg

TurboXS high performance manual boost controller-SOLD
http://img850.imageshack.us/img850/3370/010upe.jpg

Autometer fuel pressure gauge w/ steel braided line-$30
http://imageshack.us/a/img560/7986/sr20detparts012.jpg

http://imageshack.us/a/img801/3686/sr20detparts013.jpg

PLX R-500 Wideband computer ($630 new)-SOLD
http://imageshack.us/a/img266/8481/005vv.jpg

[Megin]

Might be interested in some of the stuff, will contact you later through the week. glws. :)

[SC90S13]

Interested in the timing chain kit. shipping to 13811?

[johnnysombrero]

I don't need anything, but great job on your photos. Bump for you.

[s13 drifta]

Might be interested in some of the stuff, will contact you later through the week. glws. :)

Let me know what you need. Thanks

Interested in the timing chain kit. shipping to 13811?

$93 shipped for the complete timing chain kit.

I don't need anything, but great job on your photos. Bump for you.

Thanks, took me about 12 hrs to take all pics and post.

[JAStirrett]

Do you happen to have the OEM heat shield for the mani? If so I would like both! Shipped to 33579?

[s13 drifta]

I don't have the heat shield. Let me know if you still want the manifold.

[je_decoy]

Bump up for some nice parts

[KevinEdgar]

Would you happen to have a transmission bolt set?

[s13 drifta]

Yes, I have all the bell housing bolts, $40 plus shipping.

[assad112000]

bummmmp. Timing chain kit and exhaust mani gasket SOLD

[s13 drifta]

First bump. Lets get some more stuff sold.

[theboy]

how much shipped for the rocker arms?

[s13 drifta]

how much shipped for the rocker arms?

$90 shipped and paypaled.

[voiddweller]

Wow, those are really pretty pics! Free bump.

[s13 drifta]

Wow, those are really pretty pics! Free bump.


Thanks a lot man. All it takes is time, clean parts, and a decent camera.

[Sleepy_Steve]

Sending PM.

[s13 drifta]

Last bump, let me know what you need.