Gt2871r.86, SR GReddy intake mani, msd 72lb inj, aeromotive FPR, Z maf, JWT Ecu, JGY

[BNASTYs13]

GReddy intake manifold. 100% legit. I bought it used for 500 dollars and it came unpolished. I sent this manifold and the compressor housing off the 2871r to get polished from a guy in my state on the local forum. When I got the parts back I noticed the intake mani had a corner broken off of it. I am guessing UPS was rough with it, idk. It does not affect the way the manifold performs at all. Only cosmetic. When I installed it back on the motor I sprayed starter fluid all around the missing corner to see if the idle would change and it didn’t. There is still plenty of surface for the bolt to clamp down on, just a little piece is missing. It doesn’t bother me at all. The manifold did not come with a Greddy sticker so I made this trust one. It is a thin strip of metal and the trust sticker that is glued to the manifold. If the buyer doesn’t like it just pop it off with a flat head. The manifold comes with the throttle pulley and the thermal gasket.

Price- 420 shipped obo



http://i1224.photobucket.com/albums/ee362/Bradman21/IMG_1141_zpsa65c25f3.jpg

As you can see smooth casting.
http://i1224.photobucket.com/albums/ee362/Bradman21/IMG_1143_zps09d9987b.jpg

Peice that broke off.

http://i1224.photobucket.com/albums/ee362/Bradman21/B607E07B-22A2-4FD6-A0D5-7FD7F69D34BA-1591-000000D666328F73.jpg

The back of the manifold is not polished. Which is fine because you cant see it anyway.

http://i1224.photobucket.com/albums/ee362/Bradman21/IMG_1146_zpsc7ea98b2.jpg



JGY fuel rail- 65 shipped


http://i1224.photobucket.com/albums/ee362/Bradman21/IMG_1135_zps5be2c79e.jpg




http://i1224.photobucket.com/albums/ee362/Bradman21/IMG_1130_zpse27b5ff8.jpg


http://i1224.photobucket.com/albums/ee362/Bradman21/IMG_1132_zps7de113de.jpg




Z32 maf with pigtail

80 shipped or 95 shipped with adapter. The adapter is for a 4 inch filter I believe.

http://i1224.photobucket.com/albums/ee362/Bradman21/IMG_1136_zps6162d65d.jpg

http://i1224.photobucket.com/albums/ee362/Bradman21/IMG_1137_zpsa5d0f961.jpg


http://i1224.photobucket.com/albums/ee362/Bradman21/IMG_1138_zpsa938fcb5.jpg
Megan exhaust mani with no cracks. Painted with high heat tolerable black paint

Price- 85 shipped



http://i1224.photobucket.com/albums/ee362/Bradman21/IMG_1148_zps9f4998b7.jpg

http://i1224.photobucket.com/albums/ee362/Bradman21/IMG_1149_zps5deff1da.jpg


http://i1224.photobucket.com/albums/ee362/Bradman21/IMG_1150_zps2eac9019.jpg

[thizzen4]

pm me prices shipped on the intake manni ur lowest cash price ready to paypal

[BNASTYs13]

Pmd..........

[nicopico24]

give me a deal for the ecu, rail and injectors

[BNASTYs13]

Fpr is sold

[BNASTYs13]

give me a deal for the ecu, rail and injectors



Sorry ecu and injectors are sold

[BNASTYs13]

Bump to the top

[Salvadorian561]

This for s13 SR??

[BNASTYs13]

Yeh its for s13 sr. Came off my red top

[1nasty240sx]

Still have the intake mani?

Also wondering if the stock fuel rail would work with this and were any mods done to the throttle cable when you installed it on your sr?

[Xicor01]

how much for the aeromotive fpr?

[BNASTYs13]

The manifold is still available. Yeh you can use the stock fuel rail. This mani comes with the correct throttle cable bracket you need to use on your throttle cable. It also comes with the thermold gasket and the correct throttle pulley you need. Just bolt it to your motor and enjoy :)

[BNASTYs13]

how much for the aeromotive fpr?

Sorry that is sold

[BNASTYs13]

Prices are obo. Throw me some reasonable offers and get these nice parts ;)

[BNASTYs13]

Anyone??? These are some nice parts

[hotlavaflow]

Payment sent for turbo elbow

[BNASTYs13]

Cool i will send you the tracking number tomorrow when its shipped

[Vongsayarath]

That Rail fit a KA? DOHC?

[BNASTYs13]

It might. Id email jgy and find out. I think it may

[BNASTYs13]

ever find out if it fits a KA?

[booosted_s13]

Omg, i want that mani so bad.....