waste_of_space
01-20-2013, 09:44 PM
Alright so this will be the beginning of me starting to clean out my garage since I sold 2 of my 240's. I've had most of this stuff for several years (obtained while I was in Japan).
KAAZ 2 way LSD, fits in 13/14 open diff housing, uses 1 of the open diff output shafts, and uses (I believe) a viscous output shaft (the one that's really short). I called KAAZ to confirm this a few months ago, and they had the needed output shaft for ~$70 (I got it out of my 180 when I was in Okinawa, those diffs were factory viscous so I was trying to make sure of the output shafts I needed)
Locked hard, and I loved it, but just have no use for this stuff anymore. Also the final is 49:12 if you can't read it in the picture.
$600 shipped
http://i50.tinypic.com/29cm34j.jpg
Next is a two pairs of 17x9+11 work mesh rims (not sure on exact model, just know they're awesome) They're both 3 piece, with identical lips and 40 holed barrels, but the spoke faces are slightly different (silver ones have 12 spokes, black ones have 9, though if you painted them no one would notice)
Will split the pairs, $700 shipped each pair, or $1250 shipped for all 4.
(and yes, I got the other ones from a member on here for a ridiculous price, no you don't get them for the same awesome price). I had planned on using them on my IS, but realized 17's were way to small and got some 19 inch meshies for it. You'll need spacers up front if you're running upgraded Z brakes. And yes, these are 4/5x114.3, no they weren't redrilled (from the factory baby) They have some rash, and the black ones were just spray painted black. They're 3 piece, so you could easily pull the faces off and get them powdercoated to get them real pretty
http://i45.tinypic.com/35k0u0z.jpg
http://i48.tinypic.com/qrgj7m.jpg
http://i47.tinypic.com/2qup2yb.jpg
Next is a set of Silvia pedals (looks like the s14 silvia font) I've literally never seen another set like this, and posted up here but no one replied/knew anything about them. Couldn't even find pictures, or knock offs or anything. So I'll just throw a price out there and say $100 shipped. And if anyone can find/knows more info about them that'd be pretty awesome too.
Also got a set of nismo motor mounts for s13/14. They're like new (just a little dirty from sitting). FRSport sells them for $295 (check the link out too so you can see/verify the part numbers are the same) Nismo Engine Mounts (Left and Right) S13 S14 S15 KA24DE SR20DET (http://www.frsport.com/Nismo-Engine-Mounts--Left-and-Right--S13-S14-S15-KA24DE-SR20DET_p_1266.html?gclid=CNHu5IXR-LQCFQmmPAodOSIAMg)
$190 shipped for the pair
I've got an R154 slip yoke for $50 shipped. It's good for you guys that are planning on doing a JZ swap and need a driveshaft made.
http://i47.tinypic.com/28b6vir.jpg
http://i46.tinypic.com/5chk7n.jpg
http://i47.tinypic.com/2ihrvpg.jpg
S13 coupe aero (pop up front), Origin stream front bumper with crystal position lights and a cusco license plate relocater bracket (position lights wired to blink), sideskirts (not sure on brand, but they fit really well/look really good), b magic rear aero bumper (again, for a coupe!), and an unknown brand rear bumper. Front bumper and sideskirts are painted gloss black (yes it was done in a booth), rear bumpers will need paint (both still have the factory primer on them, neither have ever been used). Origin bumper creates a little air vent under your hood so you don't need a cooling panel.
$600 for all the aero picked up!
http://i47.tinypic.com/349dh07.jpg
http://i46.tinypic.com/5d9kyu.jpg
http://i50.tinypic.com/211kqb6.jpg
Feel free to PM with any questions/offers.
KAAZ 2 way LSD, fits in 13/14 open diff housing, uses 1 of the open diff output shafts, and uses (I believe) a viscous output shaft (the one that's really short). I called KAAZ to confirm this a few months ago, and they had the needed output shaft for ~$70 (I got it out of my 180 when I was in Okinawa, those diffs were factory viscous so I was trying to make sure of the output shafts I needed)
Locked hard, and I loved it, but just have no use for this stuff anymore. Also the final is 49:12 if you can't read it in the picture.
$600 shipped
http://i50.tinypic.com/29cm34j.jpg
Next is a two pairs of 17x9+11 work mesh rims (not sure on exact model, just know they're awesome) They're both 3 piece, with identical lips and 40 holed barrels, but the spoke faces are slightly different (silver ones have 12 spokes, black ones have 9, though if you painted them no one would notice)
Will split the pairs, $700 shipped each pair, or $1250 shipped for all 4.
(and yes, I got the other ones from a member on here for a ridiculous price, no you don't get them for the same awesome price). I had planned on using them on my IS, but realized 17's were way to small and got some 19 inch meshies for it. You'll need spacers up front if you're running upgraded Z brakes. And yes, these are 4/5x114.3, no they weren't redrilled (from the factory baby) They have some rash, and the black ones were just spray painted black. They're 3 piece, so you could easily pull the faces off and get them powdercoated to get them real pretty
http://i45.tinypic.com/35k0u0z.jpg
http://i48.tinypic.com/qrgj7m.jpg
http://i47.tinypic.com/2qup2yb.jpg
Next is a set of Silvia pedals (looks like the s14 silvia font) I've literally never seen another set like this, and posted up here but no one replied/knew anything about them. Couldn't even find pictures, or knock offs or anything. So I'll just throw a price out there and say $100 shipped. And if anyone can find/knows more info about them that'd be pretty awesome too.
Also got a set of nismo motor mounts for s13/14. They're like new (just a little dirty from sitting). FRSport sells them for $295 (check the link out too so you can see/verify the part numbers are the same) Nismo Engine Mounts (Left and Right) S13 S14 S15 KA24DE SR20DET (http://www.frsport.com/Nismo-Engine-Mounts--Left-and-Right--S13-S14-S15-KA24DE-SR20DET_p_1266.html?gclid=CNHu5IXR-LQCFQmmPAodOSIAMg)
$190 shipped for the pair
I've got an R154 slip yoke for $50 shipped. It's good for you guys that are planning on doing a JZ swap and need a driveshaft made.
http://i47.tinypic.com/28b6vir.jpg
http://i46.tinypic.com/5chk7n.jpg
http://i47.tinypic.com/2ihrvpg.jpg
S13 coupe aero (pop up front), Origin stream front bumper with crystal position lights and a cusco license plate relocater bracket (position lights wired to blink), sideskirts (not sure on brand, but they fit really well/look really good), b magic rear aero bumper (again, for a coupe!), and an unknown brand rear bumper. Front bumper and sideskirts are painted gloss black (yes it was done in a booth), rear bumpers will need paint (both still have the factory primer on them, neither have ever been used). Origin bumper creates a little air vent under your hood so you don't need a cooling panel.
$600 for all the aero picked up!
http://i47.tinypic.com/349dh07.jpg
http://i46.tinypic.com/5d9kyu.jpg
http://i50.tinypic.com/211kqb6.jpg
Feel free to PM with any questions/offers.