Tenchuu
01-16-2013, 12:38 PM
I am looking to clean out my garage of things i no longer need/ am not going to get around to.
First up I have a Holset setup for a RB20/25 i bought on here.
SOLD
Holset hy35w turbo bought with 0 miles on a fresh rebuild/re balance and a brand new actuator, set of (6x) 550cc DSR low imp top feed injectors RB25DET manifold injector clips and a new 4'' SS v-band clamp for turbo - exhaust connection
Original post:
Up for sale my rb setup, I'm going for bigger pawa!! LOL
so for sale ebay manifold, customized to clear valve covers (who doest know these manifolds have 1 small problem, the t3 flange is angled that way so big ex. housing turbos hit valve cover) so the flange was cut and rewelded with different angle. A little bit dirty welds, but it will stay there forever the price of the new mani was $175
+ Holset hy35w turbo was purchased for $250+ $450 rebuild&balancing + brand new actuator.
+ I have a set of 550cc DSR low imp top feed injectors
ASKING PRICE EVERYTHING $700+SHIPPING
OR INJECTORS $160 SHIPPED
MANIFOLD $170 SHIPPED
TURBO $450+SHIPPING
http://s018.radikal.ru/i509/1202/32/ef26a5fa77fb.jpg
http://s017.radikal.ru/i443/1202/06/25e9b2e7537d.jpg
I never did anything with it, has sat in a box on the shelf at my house, don't want to look at them anymore.
next up is a stock RB25 turbo SOLD
I will look at the version umber on it when i get home, little shaft play, was bought in good condition never used, this was my backup should i end up blowing the stock one. Been years, this doesn't seem to happen.
RB25 stock flywheel $SOLD
http://i643.photobucket.com/albums/uu160/Tenchuuk2/4sail/DSC_1329.jpg
Moving on to a stock RB25DET S1 M/T ECU $80
No issues with it, i upgraded to a nistune, and this was a backup that i don't need anymore.
Stock RB25DET throttle body SOLD
http://i643.photobucket.com/albums/uu160/Tenchuuk2/4sail/DSC_1317.jpg
Set of 6 RB25DET S1 coilpacks $80 **SOLD**
tested and in working condition. They have been cleaned and taped in prep for use. These were my backups if i had issues, now i am going to a LS1 setup, so i don't need them as backup
http://i643.photobucket.com/albums/uu160/Tenchuuk2/4sail/DSC_1321.jpg
RB25DET complete clutch fan $70:
looks like a stock clutch fan, but i can get pics.
Once again my backup parts, don't need it so help yourself!
Dual stage turbo XS Dual stage manual boost controller $75 (currently sell for $249 new)
as seen here:http://turboxs.com/shop/boost-controllers/134-dual-stage-boost-controller.html but anodized blue cylinders. Also tested and works great.
http://i643.photobucket.com/albums/uu160/Tenchuuk2/4sail/DSC_1331.jpg
ES swaybar bushings SOLD
Shoot me a PM if you are interested in any of this, I am sick of moving it around and not using this stuff.
First up I have a Holset setup for a RB20/25 i bought on here.
SOLD
Holset hy35w turbo bought with 0 miles on a fresh rebuild/re balance and a brand new actuator, set of (6x) 550cc DSR low imp top feed injectors RB25DET manifold injector clips and a new 4'' SS v-band clamp for turbo - exhaust connection
Original post:
Up for sale my rb setup, I'm going for bigger pawa!! LOL
so for sale ebay manifold, customized to clear valve covers (who doest know these manifolds have 1 small problem, the t3 flange is angled that way so big ex. housing turbos hit valve cover) so the flange was cut and rewelded with different angle. A little bit dirty welds, but it will stay there forever the price of the new mani was $175
+ Holset hy35w turbo was purchased for $250+ $450 rebuild&balancing + brand new actuator.
+ I have a set of 550cc DSR low imp top feed injectors
ASKING PRICE EVERYTHING $700+SHIPPING
OR INJECTORS $160 SHIPPED
MANIFOLD $170 SHIPPED
TURBO $450+SHIPPING
http://s018.radikal.ru/i509/1202/32/ef26a5fa77fb.jpg
http://s017.radikal.ru/i443/1202/06/25e9b2e7537d.jpg
I never did anything with it, has sat in a box on the shelf at my house, don't want to look at them anymore.
next up is a stock RB25 turbo SOLD
I will look at the version umber on it when i get home, little shaft play, was bought in good condition never used, this was my backup should i end up blowing the stock one. Been years, this doesn't seem to happen.
RB25 stock flywheel $SOLD
http://i643.photobucket.com/albums/uu160/Tenchuuk2/4sail/DSC_1329.jpg
Moving on to a stock RB25DET S1 M/T ECU $80
No issues with it, i upgraded to a nistune, and this was a backup that i don't need anymore.
Stock RB25DET throttle body SOLD
http://i643.photobucket.com/albums/uu160/Tenchuuk2/4sail/DSC_1317.jpg
Set of 6 RB25DET S1 coilpacks $80 **SOLD**
tested and in working condition. They have been cleaned and taped in prep for use. These were my backups if i had issues, now i am going to a LS1 setup, so i don't need them as backup
http://i643.photobucket.com/albums/uu160/Tenchuuk2/4sail/DSC_1321.jpg
RB25DET complete clutch fan $70:
looks like a stock clutch fan, but i can get pics.
Once again my backup parts, don't need it so help yourself!
Dual stage turbo XS Dual stage manual boost controller $75 (currently sell for $249 new)
as seen here:http://turboxs.com/shop/boost-controllers/134-dual-stage-boost-controller.html but anodized blue cylinders. Also tested and works great.
http://i643.photobucket.com/albums/uu160/Tenchuuk2/4sail/DSC_1331.jpg
ES swaybar bushings SOLD
Shoot me a PM if you are interested in any of this, I am sick of moving it around and not using this stuff.