View Full Version : 5 lug swap, s14 bolt question
I know if i get a s14 knuckle that i would have to drill my shocks holes out to match them with the s14 knuckles.But is it possible to still use s13 bolts instead of using s14 and drilling the shocks out? i hear that s14 are a bit larger, but is it possible to still use s13?
and dont bother to tell me to use gto/attain hubs because i have found the front hub/spindles already...
nightwalker
03-31-2004, 01:24 AM
WHAT?? go attain hubs, and sell them to me!!
you got to drill out your shocks. Why would you care? they're blown anyways! hahaha! ...er, but seriously, where did you find them? and how much? I don't mind drillin my HEs.
post whore. get out of my thread with your useless information...
ill tell you later
PSI240SX
03-31-2004, 09:48 AM
There is a way to acheive the results you are looking for. Call a general machine shop in your area and tell them that you need iron sleeves made. They need to be 30mm long, have an I.D. of 11.91mm or .4685, and have an O.D. of 13.85mm or .5445
You will need 4 of them and you can hammer them into your S14 spindles. This will decrease the size of the hole to accomodate the smaller diameter S13 bolts.
Wei240
03-31-2004, 12:48 PM
so to recap, you need to either drill your shock/strut/coilover bolt location to a larger size or get iron sleeves to use existing s13 components to complete 5 lug swap...
interesting...
PSI240SX
03-31-2004, 12:56 PM
yea. I chose to drill out when using stock comonents but I am about to get coilovers and will not be drilling them.
nightwalker
03-31-2004, 02:31 PM
sweet! nice info PSI240SX!
btw you know what kind of material i should have this bolt in?
uuninja
03-31-2004, 07:19 PM
I had them made out of aluminum, they have worked great for over a year and only cost 60 bucks to have made.
PSI240SX
04-01-2004, 05:50 AM
mine were steel and cost $35.00
I did the same thing PSI240SX did, PDM Racing did it for me. Drop Don a email.
PSI240SX
04-13-2004, 06:06 PM
I bought the S13 bolts and nuts from Nissan for $13.00 and I had the sleeves made for $35
Here are pics of mine: http://www.planb-attack.com/jay/Spindleadapter.jpg
http://www.planb-attack.com/jay/Spindleadapter2.jpg
you know where i can buy the sleeves from?
PSI240SX
04-13-2004, 07:03 PM
see above.... 4th post down :)
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.