s14 kouki, Ka24e partout and aero (180sx/bomex), spacers

[mr.nismo.]

ok so im going sr and parting this single cam. it started showing signs of head gasket failure and i dont want it to blow so im parting everything off of it and then the head/block is being scrapped. i will add more pics as i pull parts off.
any questions ask

n60 a32 maf. works great

60$

cx racing radiator. worked great with ka always kept temps low. dont need it with my SR setup.

90$

http://i1099.photobucket.com/albums/g398/dev71893/IMG_1130_zpsa7695a4f.jpg

http://i1099.photobucket.com/albums/g398/dev71893/IMG_1129_zps9b38d1ca.jpg

s13:

coupe tunk. factory wingless. mint green. pics tommorow

30$

hood. mint green as well. pics tommorow

30$

KA24E:

denso 360cc top feed injectors, 400 miles

150$

Melling m152 high outflow oil pump. worked great with my relocation kit. has less than 200 miles on it. full psi is 90 and min was 20.

130$ shipped

water pump with less than 300 miles

25$ shipped

ngk wires

25$ shipped

bbp header, lines up w/ egr. its no where near shiny as this pic (brand new at time) but fitment is awesome.

80$ no shipping

http://i1099.photobucket.com/albums/g398/dev71893/IMG_0567.jpg

Aero:

180sx wing, the real deal not fake. just had it professionaly refinished and sprayed in gloss black. looks fucking amazing.

250$

bomex s13 sideskirks. fit great.

60$

http://i1099.photobucket.com/albums/g398/dev71893/IMG_0857.jpg

veilside rear hatchback bumper. fitment was good. i have a gap because i was rear ended so i have no core support or anything under it in this pic.

60$

http://i1099.photobucket.com/albums/g398/dev71893/IMG_0680.jpg

S14:

usdm kouki grill

60$

randoms:

s13 silvia core support. was going to use it for s13.4

70$

35mm 4x114.3 ichiba v2 spacers. comes with OE nuts or the 19's it came with, your choice

100$ shipped

s13 never used abs xdrilled/slotted rotors w/ new ceramic pads still in wrap

50$

http://i1099.photobucket.com/albums/g398/dev71893/IMG_0273.jpg

pignose bumper with damage, sticks out 1/2 on driver side on the top at fender when mounted

20$

http://i1099.photobucket.com/albums/g398/dev71893/IMG_0271.jpg

s13 vss with plug

45$ shipped

i have tid bits of s13 shit, rotors, cluster pieces for hud and analog. just ask.

may add more stuff later. we'll see, thanks..

[cloudloks]

willing to trade my aftermarket brand new kouki lights for your oem ones?
no broken tabs nor scratches.

[mr.nismo.]

willing to trade my aftermarket brand new kouki lights for your oem ones?
no broken tabs nor scratches.

no sorry. if they dont sell im sticking with oem, im not into the ones on ebay

[cloudloks]

their not ebay headlight lol, I got them from frsport.com

heres the link and pricing Spyder Auto Black Trim Kouki Headlights Set - Nissan 240SX S14 (http://www.frsport.com/index.php?target=products&mode=details&product_id=15726)

[mr.nismo.]

lol its the same look
http://item.mobileweb.ebay.com/viewitem?itemId=281002785290&index=12&nav=SEARCH&nid=32595984618

[cloudloks]

lol, probably the same look but material should be a little different, anyways same reason why im tryingto get a hold of some oem ones just for the projector.

[mr.nismo.]

ya sorry, hope you find some man

[digiceldrifter]

very interested in the headlight can u pm me more pics of the fiberglass,

[LB240driftr]

lol, probably the same look but material should be a little different, anyways same reason why im tryingto get a hold of some oem ones just for the projector.

Sry to thread jack op
My friend on here 5ix2 is selling projectors for $20 bux
Just do a retrofit its easy

Other than that gl op price is right on those headlights I've replaced mine 4 times like a tard never paid less than $350 with corners

[its yo boy 240]

Are you selling the starter by any chance?

[mr.nismo.]

i guess if you want it. 40 bucks

[mr.nismo.]

bump to the top

[Sinikal21]

is the injen intake complete? PM me, i might take a few items depending on the price.

[mr.nismo.]

whats in the pic is what youll get. you can run it without the sealoff box i made but then you would need to make a support near the filter

[VG30Drift]

Isn't the injen intake CARB legal? Does it come with a carb sticker? If so I'm very interested.

[VG30Drift]

also what pulleys are those and are they for sale?

[RSlayer]

Pic of the core support. U can text me at 2138842889... very interested...

[mr.nismo.]

Isn't the injen intake CARB legal? Does it come with a carb sticker? If so I'm very interested.

yes it has carb sticker on it and its an sr pulley kit that ill be transferring over to my new engine

[mr.nismo.]

Pic of the core support. U can text me at 2138842889... very interested...

if your up right now and are reading this, pm me and ill send some asap otherwise i will around 9am

very interested in the headlight can u pm me more pics of the fiberglass,

almost forgot sorry, been super busy ripping apart the E to be pulled and a full time job. same as the line above^

[RSlayer]

Send me them pics of the support...

[kyle_walker]

Still got the headers?

[mr.nismo.]

yupp msglnth

[jc9up]

Would you ship back bumper for s13 hatch? If you will ill buy it. Pm me

[AcostaMotoring]

sent payment for the ECU. please keep me posted on it.

[Sinikal21]

$50 for the intake?

[s13_gearhead]

Hey man, will you sell just the driver's side headlight? Need it and the kouki grill. Text if you're interested (707) 888-6983

[jayydm]

Interested in the headlights can you text me 321-332-3666 thanks

[lesley.foo]

pm to pick up headlights tomorrow

[JaredNoel]

that's a hell of a deal for a veilside rear bumper. glws!

[mr.nismo.]

that's a hell of a deal for a veilside rear bumper. glws!

thanks

Hey man, will you sell just the driver's side headlight? Need it and the kouki grill. Text if you're interested (707) 888-6983
Interested in the headlights can you text me 321-332-3666 thanks


headlights are gone sorry

[mr.nismo.]

Pic of the core support. U can text me at 2138842889... very interested...

i owe you a picture sorry, my stupid ass put a screw driver through my hand and couldnt do shit this past week, i should be able to get to it again this weekend.

[RSlayer]

Its koo bro... sucks to hear dat... yea when ever... my project is on hold anyways.

[Slammed Assassin]

buy buy buy!!so he can pay off his debt to me!

[AcostaMotoring]

Buy this guys stuff. super cool dude. Felt sketchy about buying something expensive over the net but this guy sure took care of me. bumpity bump.

[mr.nismo.]

Buy this guys stuff. super cool dude. Felt sketchy about buying something expensive over the net but this guy sure took care of me. bumpity bump.

thanks/first bump

[Ruff Ryder 6]

you said you had a coupe engine bay harness for sale. still looking for one here. I sent you a PM about it. Thanks

[Havok1427]

sent you a pm about the spacers

[OiyItsC4ry]

How's the condition on her skirts?

[mr.nismo.]

the bomex ones?

[previa19]

Still waiting on pics of the damaged coupe man, willing to pick it up soon depending on damage

[mr.nismo.]

bump for update

[mr.nismo.]

bump number 2

[sked707]

Did you ditch the head off of the single cam? Anything wrong with it?