Turbo ka24 need some help

[Nickdonner]

I have a 95 s14 with the ka I I'm goings drop a turbo on but don't understand how and where to run oil lines please let me no what u did what to do thanks

[fliprayzin240sx]

Most folks run a T from the oem oil sensor hole to the turbo inlet and then tap the oil pan for a drain.

[Rustys14]

Most folks run a T from the oem oil sensor hole to the turbo inlet and then tap the oil pan for a drain.

+1 for this. That is how I ran mine when I was Ka-t. You could also get a sandwich adapter and run the feed from that but Ting off the oil sensor is the preferred method for most people.

[Nickdonner]

So can I have my oil return line somehow put into the drain pan plug hole ad I should run the feed of the oil pressure sensor

[Bushido]

no, sorry to say it but you need to do some research...


you need to remove your oil pan and get a -10 an bung welded onto your oil pan, there is a specific place to put it if you want to keep your a/c compressor. there is a thread here by unisajecs, where he goes into detail about the oil feed/return on a KA-T

[Nickdonner]

Ok thanks guys

[Rustys14]

It doesn't sound like you have researched this enough or have a very good grasp on turbo setups so make sure you do a lot more research before you dive into it. I'll help you out though since I'm nice.

This is a good link that shows you about where your oil drain bung should be.
http://www.jgstools.com/turbo/240dl.jpg

Don't expect most people on any form (especially this one) to spoon-feed basic information like this though. All the info is out there so make sure you do some research.

[jr_ss]

Flip is correct and it would be the easiest route to take.

Furthermore, I suggest doing more research if you want any clue as to what you need to do rather than shooting in the dark. You should also post this in the correct forum, this is not the place for tech questions.

[Nickdonner]

Well thank u I'm new to this hole forms stuff and new to the turbo world was just seeing what u guys had to say cuz there's so much diff things said on how to do things but thank u