PDA

View Full Version : could some one walk me through a ....


mdzowner
03-30-2004, 11:33 AM
suspension replace ment? i have the shocks and springs and im not sure where to start. im sure you all have experience with this already. so i thought i should ask. most importantly DOES ANY ONE KNOW THE TORQUE SPECS ON THE BOLTS OR NUTS WHEN I PUT EVERYTHING BACK.thanks
ill try and post pics before and after
mdzowner

Silvia007
03-30-2004, 03:18 PM
1) Raise and support vehicle. Remove wheel, remove bolts holding strut to knuckle arm. Detach knuckle arm from bottom of strut. Remove 3 nuts holding upper end of strut to body. DO NOT remove the piston rod nut. If you want to remove the springs from the struts, you need a spring compressor, you can rent one at your local autozone or checker autoparts.

Torque Specs

Piston Rod Nut - 44-58 Ft. Lbs.
Strut-to-body Nut - 29-40 Ft. Lbs.
Strut-to-Steering Knuckle nut - 84-98 Ft. Lbs.

Agent_S13
03-30-2004, 09:20 PM
I used this, very helpful.

Suspension replacement on S13 (http://www.nissanperformancemag.com/february02/240suspension.shtml)

-Aaron
'91 240sx coupe