PDA

View Full Version : TX FS/FT 1991 240sx Hatchback - Built KA-T, Cage, Cold A/C, Daily Drifter Feeler Thread


drifter92
01-10-2013, 04:46 PM
I am posting this as a feeler thread to gauge interest in my car I will be selling to get a regular daily. I have put crazy amounts of work into this car and I can guarantee you that everything is done right and no shortcuts were taken. I build my cars with the idea that I don't care which part is the cheapest, I buy the parts that I know are quality where it matters. This is a legit drift car and a perfectly drivable daily, I'm only selling it because I really need to focus on my V8 S14 project. It has been my daily driver since the day I bought it. I drove in 2 drift events in this car and it handled great, competed in one Lone Star Drift event and finished 12th with the stock KA.

No wire tucks, no cracked unibody, no transmission grinds. This car has NO stripped bolts, NO Oil Leaks, NO Power Steering Leaks, No Transmission Leaks, No Diff Leaks, very little rust, no damage other than small dents, no core support damage. Uncracked Windshield, blinkers work, headlights & brights work.

Bads:
No washer fluid tank
Cracked Dash
Climate Control Air Routing Selector Doesn't Work
No rear speakers

THE CAR IS NOT COMPLETELY DONE YET.
I am finishing the car and then getting a daily.
Please post your thoughts and LMK what you think.

The car is only on 8LBS and it pulls great. As soon as I get the boost controller on tomorrow, ill be running 16LBS and should make 300WHP.

361-571-1026 Dean

$7,000 Firm Trades Possible

If you think It's too much, read below and add it up.

The Chassis:

VIN: JN1MS36P4MWO24406

1991 Nissan 240sx Base Model
154,000 Miles
Originally White
No Spoiler
No Rear Window Wiper
Manual Windows
Manual Mirrors
Original 5-Speed
Never Wrecked
Clean & Clear Title In Hand
Custom Roll Cage (Main Hoop & Door Bars)
It's not the prettiest cage ever but it's strong & legal.
Just About Full Interior
4 Lug
Professionally Done Window Tinting LEGAL 35% Front Windows, 20% Rear, 20% Eyebrow
Welded Differential
Inspection & Registration Legal
Fully Overhauled A/C System with Brand New Compressor
Brand New Clutch Slave Cylinder
Replaced E-Brake Cables & Calipers
New OEM Nissan Shift Boot
New OEM Nissan Lower Shifter Boot
New OEM Nissan Heater Hoses
Sylvania Silverstar Headlights
White LED Gauge & Cluster Lights
White LED Dome Light
Nismo Shift Knob
S14 Front Seats
Cracked OEM Dash
Pignose Front Bumper
Both Bumper supports installed with OEM Foam underneath, no floppy bumpers or sagging.
No damage other than small dents or scratches.
Flared Rear Fenders
DMAX Front Turn Signals
Optima RedTop Battery relocated to the trunk
10 Gauge Fuel Pump wiring with a Dorman Relay & in-line fuse
Working Rear Hatch Release Lever


Suspension & Steering:
STANCE GR+ Coilovers
Megan Racing Rear Upper Control Arms
Megan Racing Rear Toe Rods
Megan Racing Rear Traction Rods
Megan Racing Front Tension Rods
TEIN S14 Inner Tie Rods
TEIN Tie Rod Spacers for more steering angle
OEM S14 Outer Tie Rods
Drilled & Slotted Front Rotors
Square Wheels G6 Model 17x9" +15mm all around
Nankang 215/45/17 Tires up front
Not sure what rear tires yet*

Alignment:

8.0* Front Caster
-4* Front Camber
Stock Front Toe

-0.5* Rear Camber
Stock Rear Toe



This is an almost fully built S13 KA24DE with FULL RECEIPT LIST from the machine shop.

About 2,000 Miles on the new engine, runs absolutely great, flawless starts & idle, pulls hard.

1991 KA24DE
Bored +(0.020) 89.5mm
Boiled Block, Decked Block, Polished OEM Crank
New Valve guides, valve job, decked head, crack tested, shimmed lifters to OEM spec
Short-block Assembled by Scroggins Machine Inc.
Head Fully Assembled by Scroggins Machine Inc.
New wrist pin bushings on OEM Rods (Stock rods handle over 400HP easy)
ARP Rod Bolts
Forged Supertech Pistons
New Freeze Plugs
Nissan OEM Head Gasket
ARP Head Studs
Nissan OEM Oil Pump/Front Cover
Circuit Sports Thermal Intake Manifold Spacer/Gasket (Purchased New)
OSK Timing Chain Kit (Top Quality Made in Japan)
Five0 Motorsports 550cc Fuel Injectors (Purchased New with Receipt)
300zx Z32 N62 MAF
Nissan OEM S15 Garrett GT2860 Turbocharger @ 15LBS of Boost
DIF Turbo Inlet Clocking Plate
eBay Front Mount Intercooler
HKS SSQ Blow off valve
Hallman Pro Manual Boost Controller (Purchased New)
MSD Blaster Ignition Coil
Walbro 255LPH Fuel Pump
Z32 Fuel Filter
SPEC Stage 3 Clutch Kit (Purchased New)
NISMO Engine Mounts (Purchased New)
NISMO Transmission Mount (Purchased New)
NGK Spark Plug Wires (Purchased New)
eBay Stainless Tubular Turbo Manifold (Purchased New)
eBay 3" Catback Exhaust (Purchased New)
Custom Downpipe
New OEM Nissan Thermostat
APEXi Air Filter (Purchased New)
eBay Purple Oil Catch Tank (Purchased New)
GodSpeed Aluminum Coolant Overflow Tank
NEW Water Pump
NGK BKR6E Plugs Gapped at .032"
All emissions removed, swirl control valves removed.
5/16" Turbo Coolant Feed & Return
Custom -4AN Turbo oil feed setup with -4AN remote Mount Oil Pressure Sending Unit separate from the turbo feed line.



Electronics:
Innovate LM-2 Wideband Air/Fuel Monitoring (Purchased New)
APEXi SAFC-II
Enthalpy ECU Tune with soft-limit at 6800RPM
OEM Nissan Engine Harnesses (Upper & Lower, Fully Restored & Re-Taped)
Auto Meter Ultra Lite Mechanical Boost/Vacuum Gauge
Auto Meter Ultra Lite Electrical Oil Pressure Gauge
Auto Meter Ultra Lite Electrical Water Temperature Gauge
Pioneer CD Player with USB & Front Auxiliary Port
Pioneer 4x6" Front Speakers


THE CAR WILL BE PAINTED ALL WHITE ASAP WITH THE PIGNOSE LIP, 180SX SIDES AND TYPE X REAR VALANCES 3PC


http://i94.photobucket.com/albums/l99/Deanith/C9BBC253-B06E-4345-A575-14B59A450BAE-2534-000001D0D2691AC2_zps4bdd7b45.jpg
http://i94.photobucket.com/albums/l99/Deanith/5EAD07C0-4A4A-4374-9BD2-94AD332FA4CF-2534-000001D0DB6E098E_zps957871bc.jpg
http://i94.photobucket.com/albums/l99/Deanith/883A23F8-907B-40C0-B328-DF348F73BCD7-2534-000001D109B1DB01_zpsba9062ce.jpg
http://i94.photobucket.com/albums/l99/Deanith/51B06CF6-F1ED-47C9-B5E8-0E9AF4B8D711-10690-00000E3D8E3F1D7B.jpg
http://i94.photobucket.com/albums/l99/Deanith/739F5CEE-A052-4070-B1AC-4095E2D7C9AE-10690-00000E3D83C0B643.jpg
http://i94.photobucket.com/albums/l99/Deanith/CE325C2D-3FA5-49BD-89ED-3F282737E3D9-10690-00000E3D956009A1.jpg
http://i94.photobucket.com/albums/l99/Deanith/9C008430-23C8-4B49-8BDC-346B881EE9F3-10690-00000E3D9CE2C896.jpg


http://i94.photobucket.com/albums/l99/Deanith/IMG_0114.jpg
http://i94.photobucket.com/albums/l99/Deanith/9A41E4D0-9F29-4022-AB3A-AF431C91C0AF-6717-00000804B10FD4CF.jpg

http://i94.photobucket.com/albums/l99/Deanith/IMG_0111.jpg
http://i94.photobucket.com/albums/l99/Deanith/IMG_0106.jpg


http://i94.photobucket.com/albums/l99/Deanith/IMG_0005.jpg
http://i94.photobucket.com/albums/l99/Deanith/88bcf20a.jpg

Photobucket Libtary --v
http://s94.beta.photobucket.com/user/Deanith/library/

Heres the link to my youtube channel, videos of the car are all over
Untouchable 361 - YouTube (http://www.youtube.com/user/untouchable361)


Reason I'm selling ----v
http://i94.photobucket.com/albums/l99/Deanith/IMG_1364.jpg


From Houston240sx.com

super legit car. i've been there since day one when he got the car. everything that has been done was done right. indeed no shortcuts taken, i can vouch for every bit of that. it's insane how fast that turbo spools on that motor


this dude has some badass cars and hes a legit seller if I could I would pick this car up in no time


actually I was a little iffy about the car, but honestly, reading all the work done to the car, its a good price.

You concentrated on the right stuff ( engine, suspension, wheels, etc..) overall man its a dope car seriously.

drifter92
01-13-2013, 11:59 AM
Any offers? Comments?

jesse_s13
01-13-2013, 12:43 PM
Wow. That ka-t looks tits Glws

But less than 500miles on new engine and you say it pulls hard? No bueno.

slidewayzz
01-13-2013, 12:59 PM
^x2, looks like a pretty good tag though. I'd hop on it if you were closer!
GLWS

drifter92
01-13-2013, 06:18 PM
Wow. That ka-t looks tits Glws

But less than 500miles on new engine and you say it pulls hard? No bueno.


This engine was broken in EXACTLY to the specifications of the machine shop engine builder. They said that the typical old break in procedure of going easy on it for a while is not necessary due to the technology we have these days in machining and tolerances. I did their break in procedure exactly to spec and the engine is great. It never even puffed smoke on initial start up.


^x2, looks like a pretty good tag though. I'd hop on it if you were closer!
GLWS

Thanks guys, I am working on getting the car ready to sell each day.

KendallH
01-13-2013, 06:46 PM
Just FYI, the S15 spec r turbo is a 2560, not a 2860. The 2860rs is bigger. Glws

dtcevo
01-13-2013, 09:57 PM
More interior pics? Specifically of the cage?

drifter92
01-13-2013, 11:23 PM
Just FYI, the S15 spec r turbo is a 2560, not a 2860. The 2860rs is bigger. Glws


http://nissans15.com/img/gt28r.jpg
http://nissans15.com/img/gt28diagram.gif It looks like cars 6 speed manual cars built between Jan 1999 and Oct 2000 got the ball bearing turbo and cars built after this got the non ball bearing turbo. Indications are that a 6-bolt housing means it's ball bearing and a 4 bolt housing means it's non ball bearing. The best way to check though is to look at the part number on the turbo. It's a small plate in between the compressor and turbine housings.


14411-91F00 is ball bearing
14411-69F00 is plain bearing
14411-75F00 is plain bearing, used Nov 2000 onwards

The factory spec r turbo is T28


Turbine - 53mm T25, 0.64 A/R, 62 trim 38.5mm outlet, Inconel wheel
Compressor - 60mm Exd, 46.5mm Ind T3, 0.60 A/R, 60 trim

The factory spec turbo is good for a little over 200kw at the wheels



More interior pics? Specifically of the cage?

I will take some tomorrow, but here is one old one I do have for now...
It will come with full interior in the cabin and a gutted trunk area.

http://i94.photobucket.com/albums/l99/Deanith/65C5D3FE-BDCC-404D-856A-5630815617D7-1943-0000021E2E571152.jpg

drifter92
01-14-2013, 05:50 PM
Bump to the top

AS240
01-14-2013, 10:14 PM
i can vouch for everything about this car. no shortcuts were taken and everything on this car has been done right. i've been there since day one, def worth the 7k.

dtcevo
01-15-2013, 12:37 PM
I will take some tomorrow, but here is one old one I do have for now...
It will come with full interior in the cabin and a gutted trunk area.

http://i94.photobucket.com/albums/l99/Deanith/65C5D3FE-BDCC-404D-856A-5630815617D7-1943-0000021E2E571152.jpg

Sounds good. I would like to see pics of the finished cage when you get a chance. Its Pro-Am legal?

drifter92
01-15-2013, 04:18 PM
Sounds good. I would like to see pics of the finished cage when you get a chance. Its Pro-Am legal?

It's that main hoop you see there with door bars down to the front floorboard.
No rear downbars, full rear seat & trim.

Yes I competed in (Lone Star Drift) Formula D Pro-Am in Houston, Tx

Here's a picture before it was painted white
http://i94.photobucket.com/albums/l99/Deanith/91996415-B8F0-43C2-BB68-B620188CFFA6-3156-0000039946E49405.jpg

drifter92
01-17-2013, 10:48 PM
Who is interested? PM Me

Another thing I just thought of, I am the first owner of this car to modify it, it was never molested by stupid people or crashed in curbs lol

drifter92
01-23-2013, 04:07 AM
Drive the car 270 miles to Austin,Tx and back this weekend without a single problem or issue.

Buuump Lots of PM's, Keep em coming

I'm working on getting the aero painted and installed, along with that reverse light harness, finishing interior wiring, and cleaning up the car overall.
$7,000 takes it

drifter92
01-26-2013, 04:45 PM
Message me bros

drifter92
01-28-2013, 11:19 PM
New Pictures Up!

Pignose + 180sx aero is being sanded and painted and will be installed ASAP
Reverse Light Bulb Harness Is going in tomorrow so both reverse light will be working!
A/C Is getting charged ASAP (Have not charged it since the built engine)
Car is running perfectly, I have not had a single mishap or break-up, etc.

drifter92
01-29-2013, 11:03 PM
Still for sale!!!!!!!!!!!

drifter92
01-30-2013, 11:54 PM
Here is what my car will look like, the same exact aero pieces as this one without the $500 tail lights (type x)

http://i94.photobucket.com/albums/l99/Deanith/2F2040ED-019F-4E16-ACD7-6838E32F3A43-12531-0000103AE78CE5B6.jpg
http://i94.photobucket.com/albums/l99/Deanith/BD24C96C-7999-423A-879A-BDAEF238E788-12531-0000103AFACC5EB8.jpg

Tubasteve1
01-31-2013, 08:30 AM
got a nice suby wagon dd plus cash if necessary

drifter92
01-31-2013, 10:21 PM
Bump! Car is still up for grabs

drifter92
02-01-2013, 07:15 PM
bump to the top!
lots of interest but no takers yet.

Not_Drunk,
02-01-2013, 09:31 PM
Can we get a trxt or pm

drifter92
02-01-2013, 09:54 PM
Can we get a trxt or pm

Just posted my phone number up there

361-571-1026 Dean

drifter92
02-03-2013, 02:50 PM
bump to the top

Tubasteve1
02-04-2013, 07:23 AM
bump good guy to work with, wish i could pick this up!

drifter92
02-06-2013, 09:44 AM
Bump to the top

TexasJon
02-06-2013, 10:34 AM
Where are you located in Texas? I just moved here and am looking for a new car.
First post btw :D

drifter92
02-06-2013, 10:48 AM
Where are you located in Texas? I just moved here and am looking for a new car.
First post btw :D

Victoria, Texas
You're welcomed to come check out the car man

drifter92
02-06-2013, 11:21 PM
bump
new pictures up

drifter92
02-10-2013, 03:57 PM
bump to the top

drifter92
02-11-2013, 07:44 AM
Still for sale, trades welcome

mojos13
02-11-2013, 09:17 AM
bump it up!

drifter92
02-12-2013, 07:29 PM
still for sale
offers?

drifter92
02-14-2013, 07:19 PM
still for sale

new pictures up

drifter92
02-16-2013, 12:47 AM
AC is being charged tomorrow

Laser alignment is tomorrow

New ECU chips installed, tune is now perfect 11.5-12.0 under full throttle 8PSI with the SAFC 0'd out across the board.

drifter92
02-16-2013, 06:47 PM
A/C is COOOOOOLLLLLLLLLD! I had to turn it off every trip I made today because i was freezing lol

Alignment is perfect, it drives great throughout all speeds.