gabewatts25
01-09-2013, 05:13 PM
Right Hand Drive 1JZ-GTE Single Turbo 1987 Toyota Supra
The 1jz motor has 96,945 KM (60,239 Miles) in it and is original to the cluster in the car.
The Conversion was done all the way. Welds on firewall are strong. The wiring in the car was completely replaced with harnesses from a RHD car, so there are no monster wire slices to worry about on the body or motor.
Apexi Safc
AEM 3.5 bar
1JZ GTE low miles
Driftmotion Single turbo kit DM67 (all Garrett internals)
4" aluminum intake
K&N Filter
3" aluminum intercooler pipes
4"x1'x2' aluminum intercooler
HKS blow off valve
Tail wastegate
Full 3" exhaust turbo back (no cat)
Apexi n1 muffler
Walbo 255 fuel pump
Lightweight aluminum flywheel
Stage 3 southbend clutch
Eibach lowering springs
Tockico illumina shocks
Suspension Techniques front and rear sway bars
Sparco Milano Seats
5-point harnesses
harness bar
Front end and spoiler updates to late model mk3 supra style
JDM Factory black Wheels
JDM Power floding mirrors
680cc injectors
Top feed fuel rail
Injector bosses
-06 fuel line
Areomotive fpr
im sure im missing some things and parts. the cons to the car is that i got shipped the wrong o rings with the injectors that i bought so its leaking fuel out of injectors should be fixed very soon. And I would say the paint Didnt turn out as good as I hoped.
i will be taking some better pics soon
as far as price goes ill set it at 11,000obo or trades very flexible for cash
txt or pm me seven16-880-0746
pics suck ik! i will take better ones
http://i49.tinypic.com/2uyfuic.jpg
http://i49.tinypic.com/33cpvnl.jpg
http://i50.tinypic.com/15fq62v.jpg
The 1jz motor has 96,945 KM (60,239 Miles) in it and is original to the cluster in the car.
The Conversion was done all the way. Welds on firewall are strong. The wiring in the car was completely replaced with harnesses from a RHD car, so there are no monster wire slices to worry about on the body or motor.
Apexi Safc
AEM 3.5 bar
1JZ GTE low miles
Driftmotion Single turbo kit DM67 (all Garrett internals)
4" aluminum intake
K&N Filter
3" aluminum intercooler pipes
4"x1'x2' aluminum intercooler
HKS blow off valve
Tail wastegate
Full 3" exhaust turbo back (no cat)
Apexi n1 muffler
Walbo 255 fuel pump
Lightweight aluminum flywheel
Stage 3 southbend clutch
Eibach lowering springs
Tockico illumina shocks
Suspension Techniques front and rear sway bars
Sparco Milano Seats
5-point harnesses
harness bar
Front end and spoiler updates to late model mk3 supra style
JDM Factory black Wheels
JDM Power floding mirrors
680cc injectors
Top feed fuel rail
Injector bosses
-06 fuel line
Areomotive fpr
im sure im missing some things and parts. the cons to the car is that i got shipped the wrong o rings with the injectors that i bought so its leaking fuel out of injectors should be fixed very soon. And I would say the paint Didnt turn out as good as I hoped.
i will be taking some better pics soon
as far as price goes ill set it at 11,000obo or trades very flexible for cash
txt or pm me seven16-880-0746
pics suck ik! i will take better ones
http://i49.tinypic.com/2uyfuic.jpg
http://i49.tinypic.com/33cpvnl.jpg
http://i50.tinypic.com/15fq62v.jpg