vh45de FULL SWAP.

[Nibras]

mod close this

[s14sliding]

what else needs to be acquired before being able to install into s14?

[nismoracingsx]

^^^ read the ad highspeed, says you'll need a few pieces like ds, though I don't know what spacer he's referring to unless its the starter shim..

good luck in the Army man, i'd come look at this if I wasn't deployed myself :p

[Nibras]

what else needs to be acquired before being able to install into s14?

Spacer for the flywheel to compensate for the thickness of the adapterplate (excsessive manufaturing)
driveshaft

motor mounts i made seem a little low will need to be tweaked.

This swap is for people who have some experience tho

i have all the essential parts needed it's just the tweaking involved that you will need.

[Nibras]

^^^ read the ad highspeed, says you'll need a few pieces like ds, though I don't know what spacer he's referring to unless its the starter shim..

good luck in the Army man, i'd come look at this if I wasn't deployed myself :p

yeah it's a spacer that sits behind the flywheel the problem was the starter wasn't engaging and i didn't even think about it until i had everything bolted in so it was a bummer.


and thanks man stay safe!

[PureRush]

This is the spacer he's talking about. It's needed because of the thickness of the adapter plate.

Image is from my VH45 build thread :)
http://zilvia.net/f/builds-builds-only/494828-invest-till-death-purerushs-vh45de-s13-build-thread.html

http://imageshack.us/a/img14/3554/dsc01626de.jpg

[Nibras]

This is the spacer he's talking about. It's needed because of the thickness of the adapter plate.

Image is from my VH45 build thread :)
http://zilvia.net/f/builds-builds-only/494828-invest-till-death-purerushs-vh45de-s13-build-thread.html

http://imageshack.us/a/img14/3554/dsc01626de.jpg


thank youu! lol

[Nibras]

bumpp still available

[leekim240]

would u wanna sell just the motor????