SR20 turbo manifold interested??

[meme]

i'm getting a few of these in. they are full stainless with 1/2 head and turbo flange. very clean welds with 3mm thick tubes. i have 2 with me right now. they are stock placement style turbos. i have a top mounted one coming in about 1 week.

these can come with external wastegate flange;HKS or TiAL. or it can come with the wastegate tube and you can weld in your own.

there is also a ca18det,rb25det,1jz.

these are really thick and quality stuff. i got a manifold off ebay and those feel like it will crack if you drop it! i will have these at my place if anyone wants to come by and check out the quality.

i can also get the thin ones like on ebay. but for a few more bucks you can get thickermaterial.

price is about $350. i'm still trying to get a lower price. trying to buy more of there other stuff. so if there is interest i will bring them back as much as i can afford and have a groupbuy for only zilvia members.

--oh yeah; for the top mounted sr20 manifolds, which turbo flange would you like? the one coming has a t25 flange. but can be made with any style.




another item i'm trying to get done is an intake manifold for the KA24de motor. i will have more info on this at the end of the week. also a ka24de stainless turbo manifold(bottom mounted)

PM me or reply here

[gsracer]

pictures???

[sykikchimp]

sounds tasty. would definately have to see pictures.

[meme]

i'll have pics up in about 2 days. the top mounted sr20 manifold has an external hks wastegate flange.

i'm also getting some new coilover kits in. they ride height adjustable but no damper adjust as of right now. but that will be finished soon. it will have a 28 way adjust for the front with a set spring rate of 9. but for some reason there spring rates are so much higher then most companys. there civic full adjustable setup runs 10 or 11 up front. but in anycase it is real quality stuff. also the bottom half of the coilover is also adjustable(the part that bolts up to the spindle). the rears i'm not sure yet. still working on the valving and stuff(not me the company).

they do not come with front camber plates though. but that will change soon. the going price is about the same as the apex non-adjustable but this has the bottom part that can be raised or lowered.

i will have more info by the end of the week. just wish i can get the info and pics to you guys faster!

[usdms14]

for the top mount manifold will you have the right turbo extension for it?

[Salty_X]

another item i'm trying to get done is an intake manifold for the KA24de motor. i will have more info on this at the end of the week. also a ka24de stainless turbo manifold(bottom mounted)
:werd:
I'd love a bottom-mount SR manifold with a KA flange on it (stock SR turbo placement on a KA = :coold: <--me)
Definitely want to see the pics. :)

[Jeff240sx]

Are you a registered advertiser? Are you trying to sell a product that you can get at a low price and sell for more to make money commercially? Is this the right section? I think the answers are no, yes, no.
You have 9 hours or so to prove otherwise, or I'm deleting the thread.
Thanks.
-Jeff

[TurboB15sentra]

Jeff.. puttin the smack down! :-p
Travis

[meme]

understood.
i didn't want to register yet cause i am not sure if all this was going to go through. as it is right now it will but with very limited numbers(4 manifolds). i will register as soon as all the price is finalized and give zilvia only members a good discount.

i will be back home in about a week. and will take care of all the fees needed to be an advertiser. this board has helped me alot and that is why all my stuff will go to zilvia members first.

please give me a week, and i will have it all done. hope this is ok with you.

as for the KA intake manifold, the prototype will take longer then expected. i need to find a better manufacture. this one is quit rough around the edges...