S13 Center Vent Gauge Plates

[Broadfield]

http://images58.fotki.com/v447/photos/4/47612/220584/IMG_2125-vi.jpg


Fits LHD and RHD S13's
Main plate is CNC'd from 1/8" aluminum
Inside radius of the gauge openings are beveled so the gauge will drop in when angled
ABS angled rings are prepped to remove all casting nubs
ABS angled rings are trued on the bottom side as they do not come 100% flat
Main plate and rings are texture coated for OEM look
Painted with high quality SEM Satin Black
Angled plates Include aluminum mounting brackets that can be modified to fit your particular gauge(see pics below)
The mounts can also be modified to make a rock solid mounting system for the dash(see pics below)
NOTE: All prices include shipping to anywhere in the continental United States. If you are located somewhere else please ask for a shipping quote.


Item: 352 (3) 52mm Gauge Plate: $45 Shipped 1 in stock

http://images54.fotki.com/v627/photos/4/47612/220584/IMG_8710-vi.jpg

Item: 352A (3) 52mm Angled Gauge Plate: $75 Shipped 8 in stock

http://images108.fotki.com/v613/photos/2/47612/9700254/IMG_8713-vi.jpg

Item: 260152 (1) 52mm and (2) 60mm Gauge Plate: $45 Shipped 0 in stock

http://images20.fotki.com/v682/photos/2/47612/9700254/IMG_8714-vi.jpg

Item: 360 (3) 60mm Gauge Plate: $45 Shipped 2 in stock

http://images16.fotki.com/v220/photos/2/47612/9700254/IMG_8717-vi.jpg

Item: 160V (1) 60mm Gauge Plate With Vents: $65 Shipped 1 in stock

http://images12.fotki.com/v216/photos/2/47612/9700254/IMG_8719-vi.jpg

Item: 160252 (1) 60mm and (2) 52mm Gauge Plate: $45 Shipped 1 in stock

http://images57.fotki.com/v1613/photos/4/47612/220584/IMG_8721-vi.jpg

Item: 252V (2) 52mm Gauge Plate With Vents: $65 Shipped 2 in stock

http://images61.fotki.com/v431/photos/4/47612/220584/IMG_8722-vi.jpg

Item: 252AV (2) 52mm Angled Gauge Plate With Vents: $85 Shipped 4 in stock

http://images57.fotki.com/v496/photos/2/47612/9700254/IMG_8724-vi.jpg

Item: BLANK Blank Gauge Plate: $19 Shipped 1 in stock

http://images52.fotki.com/v1563/photos/2/47612/9700254/IMG_8728-vi.jpg

All Angled Gauge Setups Include Universal Brackets:

http://images42.fotki.com/v664/photos/2/47612/9700254/IMG_8729-vi.jpg

The brackets can be cut/modified to accommodate virtually any gauge. This will ensure the gauges do not budge when mounted in the plate. On top of that, the mounting bracket gives you the ability to also make a mounting system to hold the plate to the dash. You can simply tap out the center of the bracket and use some threaded rod to make a rock solid mounting system. I like to cut some aluminum strips to make "washers" and then some simple wing nuts to fasten it in the dash. The wing nuts make it simple to fasten while the dash is still in the car. You can find examples of the modified brackets and mounting system below. Note: I do not sell the mounting system, as it can vary depending on the brand and model of gauge. So I leave that to the consumer if they so choose.

Example of Modified Bracket:

http://images112.fotki.com/v355/photos/2/47612/9700254/IMG_1972-vi.jpg

Example of Modified Brackets Mounted:

http://images108.fotki.com/v191/photos/2/47612/9700254/IMG_1976-vi.jpg

Example of Mounting System Utilizing Modified Mounting Brackets, Threaded Rod, "Washers" and Wing Nuts:

http://images49.fotki.com/v629/photos/2/47612/9704802/IMG_4362-vi.jpg

http://images16.fotki.com/v369/photos/4/47612/220584/IMG_2234-vi.jpg

[s14kkouki]

That's badass

[heiyuu]

prolly stoopid questions but would the angled ones work in rhd 180sx

[f1gopedder]

prolly stoopid questions but would the angled ones work in rhd 180sx

wouldnt you just mount it upside down?

[Broadfield]

Yes, you would simply rotate the plate 180 degrees.

[Ninjamasta04]

I got the one with 52mm angled with vents. Its pretty straight forward installing these and the color matches the console. Very nice products. Thanks Broadfield.

[7jpat]

how about that adjustable vent idea , any work on that yet

[brndck]

Broadfield: its got shit 240s need.

[nickauger]

link or paypal to order ?

[Broadfield]

I got the one with 52mm angled with vents. Its pretty straight forward installing these and the color matches the console. Very nice products. Thanks Broadfield.

Thanks for the feedback!

how about that adjustable vent idea , any work on that yet

I have not had a chance to research/fabricate any new parts yet. I know that there's not much of a demand for something like that, so it's not at the top of my list. If you want to send me a vent setup and let me take my time with it, I will sell you the outcome for cheap if it works out.

Broadfield: its got shit 240s need.

I completely agree!

link or paypal to order ?

You can Paypal me at:

[email protected]

Please enter in the comments box what the payment is for and make sure NOT to gift the payment. Also make sure your correct shipping address is associated with your Paypal account to prevent shipping delays.

Thanks,

Toby

[khon240sx]

Angled Gauge Plate!!! so sexy!!!!


i'm not even boosted :( ....one day

[Vicious Beaner!]

any for an s14 ?

[Broadfield]

any for an s14 ?

Well there's no "modular" place to put something like this in an S14.... so no. But I can mold in anything you want in the vent area, ash tray area etc. You can find some examples of my work here:

http://broadfield.wordpress.com/custom-interior-pieces/

[240sxracerb25]

http://broadfield.files.wordpress.com/2012/09/img_9356.jpg

How much for one like this? Would you be able to do 2 62mm and 1 52mm? 62mm are for the greddy d/a multi gauge. Thanks

[Broadfield]

How much for one like this? Would you be able to do 2 62mm and 1 52mm? 62mm are for the greddy d/a multi gauge. Thanks

I'm not sure 62mm's are going to fit there. As you can see, 52mm's barely have enough room to fit comfortably. I wouldn't know for sure until I had the panel and gauges in my possession to see how it all lays out.

I stand by the fact that all of my work looks like it belongs and has a nice flow to it. I'm not trying to cram 10 pounds of crap into a 7 pound bag.

If everything "can" fit, then the price would range from $250 - $450 depending on how you want the gauges mounted(angled, flushed, surfaced etc.) and how you want it finished(smooth or textured).

[Dutchmalmiss]

Curious about the 52mm dual angled guage with vent for S13. Do you have pics of this installed?

[Broadfield]

Curious about the 52mm dual angled guage with vent for S13. Do you have pics of this installed?

Sorry, I do not.

[bladetech8]

Hey Broadfield!

Sent you a PM. Lmk thanks! :)

[Backintoans13]

Is the blank plate still available?? I talked to you once about it long time ago but erased my inbox one day and lost the email we were talking in lol that and i haven't really worked on my car, if it's available I'll take it! Just need your PayPal :cool:

[Broadfield]

Hey Broadfield!

Sent you a PM. Lmk thanks! :)

Replied... thanks for the purchase!

Is the blank plate still available?? I talked to you once about it long time ago but erased my inbox one day and lost the email we were talking in lol that and i haven't really worked on my car, if it's available I'll take it! Just need your PayPal :cool:

Sure is, you can Paypal me at:

[email protected]

Please enter in the comments box what the payment is for and make sure NOT to gift the payment. Also make sure your correct shipping address is associated with your Paypal account to prevent shipping delays.

Thanks,

Toby

[slickdrifter]

Triple gauge angled. Do u have one that fits Haemi gauges? I made a CF one but not angled.

[Broadfield]

Triple gauge angled. Do u have one that fits Haemi gauges? I made a CF one but not angled.

I'm not sure what Haemi gauges are, but if they are 52mm then I don't see why they wouldn't fit.

[Backintoans13]

Money Sent!! Thanks :cool:

[Broadfield]

Money Sent!! Thanks :cool:

Thank you sir! It will ship out first thing tomorrow morning!

[CptSlippyFist]

How does one go about installing this in the dash? Trying to replicate how you have pictured.

[Broadfield]

How does one go about installing this in the dash? Trying to replicate how you have pictured.

Which plate did you buy from me?

[CptSlippyFist]

Which plate did you buy from me?

(2) 52mm angled with vent. Do I just rip out all the plastic? I got most of the plastic out of the way but I'm just not sure. I would really rather not remove the dash. Btw thanks for your help.

[Broadfield]

(2) 52mm angled with vent. Do I just rip out all the plastic? I got most of the plastic out of the way but I'm just not sure. I would really rather not remove the dash. Btw thanks for your help.

You need to remove the 2 vents by popping each end out with a plastic pry tool or a flat blade screw driver. Once you have the two vents out, you will be able to see the plastic retaining tabs that hold the vent housing/surround in the dash... two on the top and two on the bottom per vent opening. Simply take a 90 degree hook pic and pull the taps inward as you pull/pry out on the vent housing/surround. It will take a little finesse, but should take no longer than 5 minutes. That's all that needs to be removed to install the plate.

[CptSlippyFist]

...Simply take a 90 degree hook pic and pull the taps inward as you pull/pry out on the vent housing/surround. It will take a little finesse, but should take no longer than 5 minutes...

Simply? Nothing is "simply" done. But thanks, that is what I thought had to be done, those tabs are killing me. Now I get to buy more tools yay. Thanks again!

This guy! Makes awesome custom accessories and helps when you run into problems? Badass.

[Broadfield]

Simply? Nothing is "simply" done. But thanks, that is what I thought had to be done, those tabs are killing me. Now I get to buy more tools yay. Thanks again!

This guy! Makes awesome custom accessories and helps when you run into problems? Badass.

Yeah, it can be tedious with those tabs. You almost need 10 hands so you can pry all of them inward at the same time. Because if you pry it inward and then release the hook pick to move onto the next tab, the first tab will probably drop back in. You may have to pry up a tab, place something thin in there under that tab to keep it out while you work on the next tab. Or, just pry the shit out of the tabs so you essentially bend them inward permanently... even breaking them. I doubt you will ever need to put that vent back in.

[newslidz]

do you have anymore of the 2 52mm angled? if so please let me know im interested in purchasing

[Broadfield]

do you have anymore of the 2 52mm angled? if so please let me know im interested in purchasing

Yep, plenty in stock and ready to ship ASAP!

You can Paypal me at:

[email protected]

Please enter in the comments box what the payment is for and make sure NOT to gift the payment. Also make sure your correct shipping address is associated with your Paypal account to prevent shipping delays.

Thanks,

Toby

[newslidz]

Yep, plenty in stock and ready to ship ASAP!

You can Paypal me at:

[email protected]

Please enter in the comments box what the payment is for and make sure NOT to gift the payment. Also make sure your correct shipping address is associated with your Paypal account to prevent shipping delays.

Thanks,

Toby


Ok thanks alot. its sent.

[Broadfield]

Ok thanks alot. its sent.

Thanks man, it will ship out first thing tomorrow morning!

[newslidz]

Thanks again man. product is top quality easy install keeping them flat at the moment. keeps the car clean and simple.


https://sphotos-b.xx.fbcdn.net/hphotos-ash3/529830_610540895626842_2147057693_n.jpg

[Broadfield]

Thanks again man. product is top quality easy install keeping them flat at the moment. keeps the car clean and simple.


Awesome man, thanks for the pic and the update... I really appreciate it!

[Rocketjfk]

Hi do you have any of these in stock?:squintd:

[Broadfield]

Hi do you have any of these in stock?:squintd:

I kind of need to know which one you are talking about in order to answer that question;)

[Rocketjfk]

Duh! 52mm Angled Center Vent Plate:eek3:

[Broadfield]

Duh! 52mm Angled Center Vent Plate:eek3:

I only have one of those left.

[Rocketjfk]

Sorry been out of town. Thats the 3 gauge unit right?

[zmklutch]

i want the 52mm Angled Gauge Plates!

[zmklutch]

if u still have them in stock

[Broadfield]

Sorry been out of town. Thats the 3 gauge unit right?

It's whatever you want!?! I have two of the (3) 52mm angled gauge plate in stock and one of the (2) 52mm angled gauge plate with vent in stock.

i want the 52mm Angled Gauge Plates!

if u still have them in stock

I have two of the (3) 52mm angled gauge plates in stock.

[slideslidegnarslide]

Pm me about 352a s13

[Broadfield]

Pm me about 352a s13

Do you just need to purchase? If you have a specific question you can ask here or PM me with the question.

[slideslidegnarslide]

Just wanted to purchase it does come with the mounting brackets right? If so yes just want to purchase.

[zmklutch]

i wanna purchase the 3 52mm angled ones

[2sav]

Do you still have the Dual 52mm Angled or flush Gauge Plate With Vents

[Broadfield]

Just wanted to purchase it does come with the mounting brackets right? If so yes just want to purchase.

PM answered!

i wanna purchase the 3 52mm angled ones

You can Paypal me at:

[email protected]

Please enter in the comments box what the payment is for and make sure NOT to gift the payment. Also make sure your correct shipping address is associated with your Paypal account to prevent shipping delays.

Thanks,

Toby

Do you still have the Dual 52mm Angled or flush Gauge Plate With Vents

I have one of the 252AV's left in stock... so the dual 52mm angled with vent slots.

[negativejason]

do you have a 3 angled 52mm plate in stock?

[Broadfield]

do you have a 3 angled 52mm plate in stock?

I do not, hopefully in about 3 weeks or so. If you want to guarantee yourself one from the next batch you can feel free to prepay for one. Just let me know if you want to do that.

[slowvia]

So on the (2) 52mm vented plate, can it still function to blow air through the vent in the plate? And does it show much behind the dash (through the vents I mean)? I figure even if it does it wouldn't be hard to cut up a small filter to put behind it.
Probably an incredibly stupid question, but I'm too lazy to figure it out myself right now, lol.

[hotlavaflow]

Any $19 blanks in stock?

[Broadfield]

So on the (2) 52mm vented plate, can it still function to blow air through the vent in the plate? And does it show much behind the dash (through the vents I mean)? I figure even if it does it wouldn't be hard to cut up a small filter to put behind it.
Probably an incredibly stupid question, but I'm too lazy to figure it out myself right now, lol.

Yes, that is the point behind it... to still allow some air flow through the vent slots. If I personally had this in my car, I would make sure everything behind there was finished in black. So if the gauge bodies were something other than black, I would spray paint them black. I would then make sure the wires for the gauges were wrapped in something black... black electrical tape, black split loom, black braided sleeving etc.


Any $19 blanks in stock?

I do not... I've only sold one ever and I had it in stock for over a year. It would be another 3-4 weeks before I would have that back in stock.

[Broadfield]

All gauge plates back in stock and ready to ship... stock levels updated in orignal post.

All preorders shipping!

[Levi_thagreat]

52mm angled shipped to 97128

[koukimonst3r]

Got any triple 60mm in stock?

[Broadfield]

52mm angled shipped to 97128

Prices listed are "shipped" prices to anywhere in the continental USA.


Got any triple 60mm in stock?

All stock levels are current and up-to-date... so yes!

[Levi_thagreat]

Well pm me your paypal ,

[Broadfield]

Well pm me your paypal ,

PM sent!!!

[RD_240]

Toby,

Interested in: Item: 352A (3) 52mm Angled Gauge Plate: $75 Shipped 6 in stock

Can you PM me your paypal info so I can send payment?

Thank you

[Broadfield]

Can you PM me your paypal info so I can send payment?


Done deal!

[Nizmology]

pm/cash money sent!

[Hiighboost2]

Just got mine in yesterday.
I'm glad I saved my pennies and got one because it fits great and blends in with the dash perfectly.
Thanks again!

[m tr4nch]

interested in a 352A when you make more!
will check back.

[91EfSi]

Whens next batch of the 352A?

[chris952jz]

Have you made any of the 160v plates with the a angle mount? Id be interested in possibly getting one.