xeemersil80
12-24-2012, 09:34 PM
UPDATE: BLACK Z32 30MM FRONT ALUMINUM PENDING-
Alright guys so I am in a very difficult situation in life where I have to give up my sil80 because I dont have the time to fix or touch it anymore due to my full-time job and my education as I am getting close to getting into the Nursing program. On top of that my girlfriend's car Jeep Grand Cherokee has been giving us a lot of problems these last six months which I had to fix continuesly because it was the car we used to get us to work and school (I HATE AMERICAN CARS). Now I have to give up my car in order to help out with a down payment on a new reliable car for the two of us.
So, it all started when I was 19 yrs. old when I bought my sil80 from a guy up in Sacramento, CA. It was totally stripped out because the previous owner before him used it as a straight track car. The car came with the silvia conversion, j30 5-bolt VLSD, ka24de, 17' Super Advans Ver.1, and a Sr20det. The car still have the welding plates in the car from its roll cage which was taken out by the owner before me. Over the years I have tried my best to replace everything that was broken or was not there. It was difficult to get the things I liked to get because I am a broke college student, but I got whatever I can afford at the time.
Car Info:
91' Nissan 240sx
Approximately 187,000 miles
Color: Black w/ gray and black interior
Located: Fresno, CA
Tags are expired but I will be getting that paid off next week. The car passed smog last year and does not need a smog till June 2013. I replaced the cat last year because it failed the smog so since the motor is stock it should pass smog next year. The car has been mainly sitting in front of my house because I have been driving my gf's car because her jeep used up so much gas that we just decided to use only one car to travel and save money on gas which it really didn't because the Grand Cherokee cost about $125 per week for a full tank. That almost like a car payment in one month..lol
ENGINE
As of now, I do not have the Sr20det anymore because I gave it to my uncle to finish what I left off with the rebuild. I believe I just had too much on my plate to handle. I did the painting to this valve cover..lol
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120712_212010_zpsf794d086.jpg
So, the car has it original Ka24de. The KA's timing chain rattles a bit if the oil gets too low. There is a mild oil leakage some where I don't know. I originally thought the oil leak was coming from the oil pan. So, I replaced the oil pan with another one with a oil pan gasket, but there was still a oil leak, but just not as bad as it was before. I will be replacing the battery this coming friday so the new owner can have a reliable battery. Alternator has been replace several times and if I still have a old KA alternator around I will take it to autozone and replace that one with a new alternator so there will be a fresh new alternator if needed. One Con I think that will hurt me the most with the sale of this car is that the clutch seems to not be able to hold the power anymore. So, if you floor the gas pedal there will be a lag, but the car will still go. I was planning to get the clutch replaced next month for my birthday with a competition clutch, so If i still have the car by then I might just replace it.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142302_zps3bb38340.jpg
INTERIOR
Like I have said before when I first got the car everything inside was stripped out the only things that was there was the door panels, seats, dash, and center console. I replaced the interior with what I can except for the carpet. I was planning to buy a carpet from stockinterior.com next year, but sadly that won't happened. There is that normal tear on the driver seat, dash is all cracked out..lol
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142203_zps0e4bc85f.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142211_zps7aaa7f54.jpg
I still have the center console, just took it out to fix something. I was planning on replacing the driver seat with a 350z driver seat. This will be included in the package deal, the next owner just needs to customize it to fit the s chassie.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_143356_zpsb6705753.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142430_zps0e450485.jpg
I also have another dash in my garage that I was planning to replace it with after it cut a hole in the dash to up the HUD.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142501_zpsa529bb79.jpg
It has a little crack and some hair line fracture due to storage damage.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142511_zps1a810999.jpg
I really wanted to go all digital with my cluster and with the climate control. This will be included in the package as well. I am not sure about the Nismo shift knob, might give it to a friend as a christmas gift. The digital cluster and HUD comes with pigtails. The digital cluster is for a single cam, but all you need to do is switch the rpm gauge with the cluster in the car in order to use for a dual cam. The digital climate control still works and it comes with almost everything needed, but not all sensors are there . I bought it with only the sensor that you place in the vents on the dash near the windshield. Both items were bought from fellow members on this forum.
http://i47.photobucket.com/albums/f153/fantastic-1/S13digitalinterior_zpsaa8756d3.jpg
Exterior:
The car's paint is kinda fading due to the crazy 100 degrees heat temperature here in the Central Valley. There spots where the paint is chipping, dings, and dents, but nothing too major. The front bumper is cracked and didn't really care much because I was going to replace it with the JDM silvia bumper.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142120_zps51252b28.jpg
I also got the kouki s13 jdm back lights and a fiber glass carbon fiber top layer invert hatch from chaseraero. It came with that stupid as plexy glass and rubber sealed that did not work for shit. I went to a local hotrod custom glass and tinting to get a real glass placed in. I was one of the fews to first get chaseraero's invert hatch which came out to $650 shipped and it cost me another $150 to get the custom glass and installed.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142151_zpsfa6bd177.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142102_zps78e1b37b.jpg
I will be including the s13 oem silvia bumper w/ grills, the silvia grill w/ one broken tab, and s15 spec R side skirts that I was going to go get customized to fit my car.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142625_zpsc28259ac.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_143109_zps8dd6a4ce.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_143120_zpseb347979.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_143603_zpsb987486d.jpg
This was my inspiration for my s13 front (Simple and Clean)
w/ that bomex lip.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/Bomexsilvialip_zpsf698fc03.jpg
Additional items that will be included in this package are:
Three piece Origin Lab's spoiler
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_144536_zps3a06a4ad.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_144543_zps0a92ba09.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_144548_zps6e16c7f1.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_144601_zps8920bd86.jpg
S13 hatch
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_144251_zpsbe8e5c79.jpg
Also a rear roof spoiler which i have no clue which brand it is. It has a little crack that can be repaired.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142944_zps84195eb4.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_143010_zps4db75314.jpg
My stock rear 180sx lights
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_144105_zpsf3859454.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_144121_zpsa15a53ac.jpg
SUSPENSION:
I never really got around to getting a set of coilovers. It is currently sitting on kyb shocks and tien's springs. The car also have j30 5 bolt VLSD.
BRAKE SET UP:
I am currently running the stock s13 brakes w/ brembo rotors and some autozone brake pads. I placed the new rotors and brake pads in April, but never really drove it around because that was when the gas prices starting to get too expensive for both my GF's and my car.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/bremborotors_zps82de2fbd.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/bremborotors2_zps8ec0ff08.jpg
Another item that will be included in this deal will be 26mm z32 front and rear calipers. I was in the process of rebuilding it, but things came up so that is why i am having this sale. The calipers have everything on them.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120604_181812_zps71acaa8a.jpg
WHEELS:
Currently on 92' Enkies, but I do not plan on selling the enkies with it because they actually belong to my uncle who is into japanese classics and they love these enkies. So, i was thinking about just getting some SE rims and throw them on when someone comes and get it. Then I decided I won't be needing the Super Advans after this car so I will be including the advans in with the SE rims.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120302_163343-Copy_zps49ad7b37.jpg
These are 17x8 and 17x9 4x114' (Four lug lovers only..lol) Super Advans Ver. 1. I heard these are still worth atleast $1,500 compared to the new versions. So, since I had these they were in pretty bad shape due to weather and some minor curb marks. I repaired it to the best and polished the lips really nice. All it needs is a nice paint job and clear coat.
Here are some before and after pictures.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120302_163442-Copy2_zps252ef6d7.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120302_163416-Copy2_zps61dade8e.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120302_163449-Copy_zpsb8eb5b45.jpg
Most of the local shops here in Fresno did not want to polish the lips because the rim is a one piece rim and it is a really tight squeeze to polish the lip.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120302_163536-Copy2_zps9338dff9.jpg
So, a buddy of mine and I decided to do it ourselves and to tell you the truth I was really happy with the end results. We had to use a tool from autozone that was bent to help polished in between the tight spots. We used blue magic to polish these bad boys w/ a power tool to help do all of the polishing.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_161616_zps3cc14006.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_161635_zpsbe7828c3.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_161543_zpsfc78914e.jpg
Here are some pictures of the process.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_161435_zpsf6e3b733.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_160552_zpsd7a32a48.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_160617_zps869353bb.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_162106_zps85ea971c.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_162120_zpsf545f9ce.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_162347_zps1b14c269.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_162620_zps680de684.jpg
Can you tell the difference??
Here are the End results:
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120302_163644-Copy2_zps2fa3ca98.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120302_163657_zps1f00e7de.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120302_163851_zpsde835c2c.jpg
Here are the only items that I will part out only.
This is only for RHD ONLY!! Center console with arm padding from JDM ENGINE WORLD. Both of the latches are broken and it came that way from JDM engine when i bought it. I bought it for $132 shipped from NY to CA. So, I like to sell it for $90+shipping.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120521_205958_zps2b973228.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120521_210029_zpsc9d9ca2c.jpg
Second Item that I will only part out is:
30mm z32 Aluminum Front Calipers $120+shipping
comes with all hardware
http://i47.photobucket.com/albums/f153/fantastic-1/20121224_143826_zps34907ad0.jpg
I have a lot of parts that I want to sell with the car and not to part out besides the two items above because I do not need anymore stress. The person who gets the car for the right price will get everything and it is up to them if they chose to sell the other parts.
So, I need help from this forum's car enthusiast to help me with deciding the right price range for my car with all the items added on. I would really appreciate the help. Thanks for looking and I am sorry if this was too much detail, but i believe when you're shopping for something, you should get the most detail of what you're shopping for.
Please contact me for info.
Best contact would be 559-244-1335
XEEM MOUA
And please keep all bad comments to yourself.
Alright guys so I am in a very difficult situation in life where I have to give up my sil80 because I dont have the time to fix or touch it anymore due to my full-time job and my education as I am getting close to getting into the Nursing program. On top of that my girlfriend's car Jeep Grand Cherokee has been giving us a lot of problems these last six months which I had to fix continuesly because it was the car we used to get us to work and school (I HATE AMERICAN CARS). Now I have to give up my car in order to help out with a down payment on a new reliable car for the two of us.
So, it all started when I was 19 yrs. old when I bought my sil80 from a guy up in Sacramento, CA. It was totally stripped out because the previous owner before him used it as a straight track car. The car came with the silvia conversion, j30 5-bolt VLSD, ka24de, 17' Super Advans Ver.1, and a Sr20det. The car still have the welding plates in the car from its roll cage which was taken out by the owner before me. Over the years I have tried my best to replace everything that was broken or was not there. It was difficult to get the things I liked to get because I am a broke college student, but I got whatever I can afford at the time.
Car Info:
91' Nissan 240sx
Approximately 187,000 miles
Color: Black w/ gray and black interior
Located: Fresno, CA
Tags are expired but I will be getting that paid off next week. The car passed smog last year and does not need a smog till June 2013. I replaced the cat last year because it failed the smog so since the motor is stock it should pass smog next year. The car has been mainly sitting in front of my house because I have been driving my gf's car because her jeep used up so much gas that we just decided to use only one car to travel and save money on gas which it really didn't because the Grand Cherokee cost about $125 per week for a full tank. That almost like a car payment in one month..lol
ENGINE
As of now, I do not have the Sr20det anymore because I gave it to my uncle to finish what I left off with the rebuild. I believe I just had too much on my plate to handle. I did the painting to this valve cover..lol
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120712_212010_zpsf794d086.jpg
So, the car has it original Ka24de. The KA's timing chain rattles a bit if the oil gets too low. There is a mild oil leakage some where I don't know. I originally thought the oil leak was coming from the oil pan. So, I replaced the oil pan with another one with a oil pan gasket, but there was still a oil leak, but just not as bad as it was before. I will be replacing the battery this coming friday so the new owner can have a reliable battery. Alternator has been replace several times and if I still have a old KA alternator around I will take it to autozone and replace that one with a new alternator so there will be a fresh new alternator if needed. One Con I think that will hurt me the most with the sale of this car is that the clutch seems to not be able to hold the power anymore. So, if you floor the gas pedal there will be a lag, but the car will still go. I was planning to get the clutch replaced next month for my birthday with a competition clutch, so If i still have the car by then I might just replace it.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142302_zps3bb38340.jpg
INTERIOR
Like I have said before when I first got the car everything inside was stripped out the only things that was there was the door panels, seats, dash, and center console. I replaced the interior with what I can except for the carpet. I was planning to buy a carpet from stockinterior.com next year, but sadly that won't happened. There is that normal tear on the driver seat, dash is all cracked out..lol
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142203_zps0e4bc85f.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142211_zps7aaa7f54.jpg
I still have the center console, just took it out to fix something. I was planning on replacing the driver seat with a 350z driver seat. This will be included in the package deal, the next owner just needs to customize it to fit the s chassie.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_143356_zpsb6705753.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142430_zps0e450485.jpg
I also have another dash in my garage that I was planning to replace it with after it cut a hole in the dash to up the HUD.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142501_zpsa529bb79.jpg
It has a little crack and some hair line fracture due to storage damage.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142511_zps1a810999.jpg
I really wanted to go all digital with my cluster and with the climate control. This will be included in the package as well. I am not sure about the Nismo shift knob, might give it to a friend as a christmas gift. The digital cluster and HUD comes with pigtails. The digital cluster is for a single cam, but all you need to do is switch the rpm gauge with the cluster in the car in order to use for a dual cam. The digital climate control still works and it comes with almost everything needed, but not all sensors are there . I bought it with only the sensor that you place in the vents on the dash near the windshield. Both items were bought from fellow members on this forum.
http://i47.photobucket.com/albums/f153/fantastic-1/S13digitalinterior_zpsaa8756d3.jpg
Exterior:
The car's paint is kinda fading due to the crazy 100 degrees heat temperature here in the Central Valley. There spots where the paint is chipping, dings, and dents, but nothing too major. The front bumper is cracked and didn't really care much because I was going to replace it with the JDM silvia bumper.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142120_zps51252b28.jpg
I also got the kouki s13 jdm back lights and a fiber glass carbon fiber top layer invert hatch from chaseraero. It came with that stupid as plexy glass and rubber sealed that did not work for shit. I went to a local hotrod custom glass and tinting to get a real glass placed in. I was one of the fews to first get chaseraero's invert hatch which came out to $650 shipped and it cost me another $150 to get the custom glass and installed.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142151_zpsfa6bd177.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142102_zps78e1b37b.jpg
I will be including the s13 oem silvia bumper w/ grills, the silvia grill w/ one broken tab, and s15 spec R side skirts that I was going to go get customized to fit my car.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142625_zpsc28259ac.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_143109_zps8dd6a4ce.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_143120_zpseb347979.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_143603_zpsb987486d.jpg
This was my inspiration for my s13 front (Simple and Clean)
w/ that bomex lip.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/Bomexsilvialip_zpsf698fc03.jpg
Additional items that will be included in this package are:
Three piece Origin Lab's spoiler
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_144536_zps3a06a4ad.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_144543_zps0a92ba09.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_144548_zps6e16c7f1.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_144601_zps8920bd86.jpg
S13 hatch
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_144251_zpsbe8e5c79.jpg
Also a rear roof spoiler which i have no clue which brand it is. It has a little crack that can be repaired.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_142944_zps84195eb4.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_143010_zps4db75314.jpg
My stock rear 180sx lights
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_144105_zpsf3859454.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20121224_144121_zpsa15a53ac.jpg
SUSPENSION:
I never really got around to getting a set of coilovers. It is currently sitting on kyb shocks and tien's springs. The car also have j30 5 bolt VLSD.
BRAKE SET UP:
I am currently running the stock s13 brakes w/ brembo rotors and some autozone brake pads. I placed the new rotors and brake pads in April, but never really drove it around because that was when the gas prices starting to get too expensive for both my GF's and my car.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/bremborotors_zps82de2fbd.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/bremborotors2_zps8ec0ff08.jpg
Another item that will be included in this deal will be 26mm z32 front and rear calipers. I was in the process of rebuilding it, but things came up so that is why i am having this sale. The calipers have everything on them.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120604_181812_zps71acaa8a.jpg
WHEELS:
Currently on 92' Enkies, but I do not plan on selling the enkies with it because they actually belong to my uncle who is into japanese classics and they love these enkies. So, i was thinking about just getting some SE rims and throw them on when someone comes and get it. Then I decided I won't be needing the Super Advans after this car so I will be including the advans in with the SE rims.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120302_163343-Copy_zps49ad7b37.jpg
These are 17x8 and 17x9 4x114' (Four lug lovers only..lol) Super Advans Ver. 1. I heard these are still worth atleast $1,500 compared to the new versions. So, since I had these they were in pretty bad shape due to weather and some minor curb marks. I repaired it to the best and polished the lips really nice. All it needs is a nice paint job and clear coat.
Here are some before and after pictures.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120302_163442-Copy2_zps252ef6d7.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120302_163416-Copy2_zps61dade8e.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120302_163449-Copy_zpsb8eb5b45.jpg
Most of the local shops here in Fresno did not want to polish the lips because the rim is a one piece rim and it is a really tight squeeze to polish the lip.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120302_163536-Copy2_zps9338dff9.jpg
So, a buddy of mine and I decided to do it ourselves and to tell you the truth I was really happy with the end results. We had to use a tool from autozone that was bent to help polished in between the tight spots. We used blue magic to polish these bad boys w/ a power tool to help do all of the polishing.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_161616_zps3cc14006.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_161635_zpsbe7828c3.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_161543_zpsfc78914e.jpg
Here are some pictures of the process.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_161435_zpsf6e3b733.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_160552_zpsd7a32a48.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_160617_zps869353bb.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_162106_zps85ea971c.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_162120_zpsf545f9ce.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_162347_zps1b14c269.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120524_162620_zps680de684.jpg
Can you tell the difference??
Here are the End results:
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120302_163644-Copy2_zps2fa3ca98.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120302_163657_zps1f00e7de.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120302_163851_zpsde835c2c.jpg
Here are the only items that I will part out only.
This is only for RHD ONLY!! Center console with arm padding from JDM ENGINE WORLD. Both of the latches are broken and it came that way from JDM engine when i bought it. I bought it for $132 shipped from NY to CA. So, I like to sell it for $90+shipping.
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120521_205958_zps2b973228.jpg
http://i47.photobucket.com/albums/f153/fantastic-1/My%20sil80%20project/20120521_210029_zpsc9d9ca2c.jpg
Second Item that I will only part out is:
30mm z32 Aluminum Front Calipers $120+shipping
comes with all hardware
http://i47.photobucket.com/albums/f153/fantastic-1/20121224_143826_zps34907ad0.jpg
I have a lot of parts that I want to sell with the car and not to part out besides the two items above because I do not need anymore stress. The person who gets the car for the right price will get everything and it is up to them if they chose to sell the other parts.
So, I need help from this forum's car enthusiast to help me with deciding the right price range for my car with all the items added on. I would really appreciate the help. Thanks for looking and I am sorry if this was too much detail, but i believe when you're shopping for something, you should get the most detail of what you're shopping for.
Please contact me for info.
Best contact would be 559-244-1335
XEEM MOUA
And please keep all bad comments to yourself.