PDA

View Full Version : CA S14 SR20 GT3071R ++Extras


RawrSoft
12-24-2012, 03:45 PM
****Not Parting Out****

Alright, so I have my motor up for sale. It has between 10-50 miles and I'm selling it because my friend took the liberty of crashing the chassis this was in and I no longer want to try and fix my beloved 510. The motor came out running perfectly, and if you float around zilvia to try and find my 510, you'll see the impact and damage really isn't that substantial. Nothing touched the motor, but I just don't feel the need to fix the car at this point so I'm selling everything and he's ( friend ) going to be footing the rest of what I don't recover in sales.

Every nut / bolt, oil / coolant line, seal / gasket and grommet has been replaced. The entire motor has been disassembled, cleaned and put back together within 25 miles running time.

S14 SR20DET
Circuit Sports RAS
Forged Pistons
Freddy Intake Manifold Powder Coated
Top Mount Exhaust Manifold Ceramic Coated
GT3071R (Absolutely perfect condition with no more than 50 miles)
Tomei 555cc Injectors
Z32 MAF
Apexi Intake
Circuit Sports Fuel Rail
Crower Valves / Retainers / Springs
Crower Cams
New 02 Sensor / thermostat / pump
Brand new Wiring Specialties Main engine harness ( only injector and coil harness are used )
JWT Tuned ECU
ACT 6 puck clutch and PP

There's quite a bit of things I'm missing here and there, but this is the jist of it.

I have a million pictures, and if you'd like all of them ill post them, but here's a few to get you started

http://i12.photobucket.com/albums/a218/rawrsoft/IMG_1637.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_0613.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_1448.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_1438.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_1511-1.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_1509-1.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_1489-1.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_1515-1.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_1630.jpg
Just even small things like the intake bolts.. Stainless steel so that they transfer less heat in addition to the spaced gasket..

http://i12.photobucket.com/albums/a218/rawrsoft/IMG_2633-1.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_2634-1.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_2635-1.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_2636-1.jpg

This is as it sits in my garage right now.

$4,500
Feel free to shoot me offers, or tell me what you think it's worth. There's quite a lot of other parts I have laying around as well.. intercoolers, radiators, piping, FPR, Transmission.

I'm Located in Temecula~

driftkids1
12-26-2012, 10:29 PM
pm me what you did on the valve cover nuts looks pretty nice

jamg
12-26-2012, 10:58 PM
this is so nice.

not ever a chance at parting?

a fast nickel is better than a slow dime...

thizzen4
07-15-2013, 11:40 PM
what kinda of paint did u use to paint intake manni and block looks super clean I would love to do this to mine and is the paint resistant enough to paint turbo manni or does turbo manni get to hot pm me please