Fully built sr20det 600+whp '92 240sx beware of pics!

[ForeignMuscle]

This has been my growing project for over 2 years. I have recently decided to organize my priorities and at the moment that is finishing my degree.

The engine is currently on a stand and is being assembled and installed as you read this. Everything besides the block and intake manifold is new. I know the pics wont do any justice and there are not enough. I did not spare any thing with this engine. EVERYTHING is top of the line. Give me a free bump if you view this. Thanks for looking!!

The car is a 1992 240sx. It is nothing special, but it was bought to be a test mule for my engine. Uncracked dash, s14 seats. It is bone stock except for a NRG quick release and Mooncraft steering wheel. It is a factory HICAS car that has the 4 wheel steering deleted. It has fatter sway bars and a quicker steering ratio rack from the factory. BRAND NEW tires! Here is the list that I just threw together of what's under the hood. I'm sure there is plenty of parts missing..

The tune is JWT's 700hp program. It utilizes their ECU (tuned for 91/100 octane, no speed limiter, 7850rpm limit) Ford Lightning MAFS, and MSD 96lb injectors.

Engine
• CP pistons (86.5mm, 8.5:1 CR) $500
• Manley H-beam rods $350
• ACL race bearings (main, rod, thrust) $125
• OEM crankshaft $650
• OEM front and rear main seals $40
• OEM oil pump and front cover $260
• Machining and assembly by Mitchell Racing Engines (+.020 w/ torque plate) $580
• OEM timing chain $50
• GTiR main bolts $60
• Apexi head gasket (87x1.1mm) $230
• ARP head studs $150
• S14 oil pick up $25
• OEM pick up gasket $5
• Moroso oil pan $300
• OEM exhaust manifold gasket $30
• OEM upper oil pan $100
• Coolant temp sensor $15
• Circuit Sports rocker arm stoppers $80
• OEM intake manifold gaskets $40
• Nismo engine mounts $150

Exhaust System (ALL EXHAUST HARDWARE IS DRILLED. IT WILL ALL BE SAFETY WIRED, AIRCRAFT STYLE. FAA APPROVED:))
• Hybrid Dynamics top mount manifold $385 (msrp $700)
• 3” SS piping (downpipe) $50
• T31 to 3” vband adapter $60
• SS 3” vband flange $30
• Mild steel 3” vband flange $20
• 3” vband clamp $20
• ATP dump tube $75
• ATP stainless tube for dump $25

Induction
• Precision CEA 5858 $900
• -3AN turbo feed fitting $20
• Turbo drain flange $30
• Turbo drain gasket $5
• PBM high mount intercooler $400
• Precision 46mm wastegate $400
• HKS SSQV bov $175
• HKS bov flange $25
• AEM Dry Flow filter and pre filter $100
• ’01 Ford Lightning MAFS $200
• Silicone boots and t-bolt clamps $100
• OEM throttle body gasket $5

Fuel System
• Walbro 255lph FREE
• MSD 96lbs injectors $500

Plumbing (Earl’s Swivel Seal forged ends, Perform-o-flex hoses, and weld-on bungs)
• AN fittings welded to block and valve cover $50
• PCV mod (-10) $200
• Turbo feed w/ XRP Fyre Foil (-3) $100
• Turbo drain w/ XRP Fyre Jacket (-10) $100
• Nissport oil pressure multi-port $60
• ½”BSPT to ½”NPT fitting (oil return to block) $15
• ½”NPT to -10AN straight $6
• ½”NPT to -10AN 45* $8
• -6AN cap $15

Fasteners
• ProBolt 10x1.5x25mm Race Spec (x4, turbo inlet) $40
• ProBolt 8x1.25x25mm Race Spec (x4, turbine discharge) $35
• Probolt 8x1.25x30mm Race Spec (x2, turbo oil drain flange) $30
• OEM exhaust hardware: “The Worx” (PDM-Racing) $200
• OEM cam cap bolts $50
• OEM valve cover hardware $75

Drivetrain
• B&M short throw shifter $200
• Circuit Sports SS clutch line $50

Suspension
• AMS Hicas delete/adjustable toe rods $400
• Tie rod ends (Moog) $75
• OEM inner tie rod boots $25
• OEM front lower control arms $100
• OEM inner tie rods $75

Cooling
• Koyo radiator $100
• OEM fan shroud $50

Electrical
• Jim Wolf Technology ECU (91octane, ’01 Lightning MAFS, MSD 96lbs injectors) $600
• Prosport Pro Series electric boost gauge $100
• Prosport Pro Series electric oil pressure gauge $100
• OEM 12mm Ti. O2 sensor (12mm) $70
• Innovate LC-1 Wideband w/ digital gauge $160

TOTAL= $10,354
+$2000 for original redtop sr20det w/ transmission
+$1000 chassis
+$400 set of tires
+$100 for s14 seats
+$150 for a Pioneer CD player with Aux. hook up
+MANY hours in the garage.

I am asking $10,000 OBO for everything. Please do not flame my ad. It will not help either one of us. I know you can get a VERY nice car for this price, but this is a VERY well built engine for the price. It was not built to be a panty dropper. It was built to make you shit your pants in whatever motorsport you choose to partake in.

Now I do not have pictures of everything and like I said it is not all installed in the car, but it will be installed over the next week. I've been an auto enthusiast since birth lol, and I am very meticulous about my vehicles. This car will be mechanically perfect and ready for whatever you can throw at it. It will be broken in (and sold) with factory injectors and ecu. The wastegate will be on 4.5psi. The JWT 700hp program will be included with the sell for the buyer to install.


Let me know if you are interested in any further information or pictures that I can take for you. Thanks again for looking!

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-53469-1357089593889.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-5400-1357089640955.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-31711-1357089670572.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/020-2.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-33603-1357089696170.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-24988-1356037135645.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-6992-1356038905807.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-24967-1356037445066.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-24960-1356037075414.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-12474-1355205907523.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-53201-1354327974130.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-38034-1354080624817.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-15130-1351879733238.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-21300-1351567536729.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-8230-1351382780507.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-7479-1351027778056.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-6446-1351004504886.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/002-2.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/DSCN1523.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/012-4.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/016.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/021.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/015.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/161.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/160.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/118.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-24949-1356735821766.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-2520-1356735804600.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-58431-1356735833687.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-46396-1356735792129.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-55249-1356662067964.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-49674-1356563113740.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-32153-1356735856568.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-58554-1356920907898.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-24875-1356920233862.jpg

http://i1120.photobucket.com/albums/l494/gmbateman/photobucket-27888-1356920266142.jpg

[801nismo104]

are you parting any of it out? im interested in the turbo manifold and maybe a few other small stuff. you have lots of cool stuff, free bump

[Ekaptn]

bump not a bad price for all that was done. good luck

[ForeignMuscle]

Thanks for the bump guys.

I am just getting the car back together so I will not be parting it out. I work full time and go to school full time so I honestly do not have the time it would take.

[drscooper]

free bump for legit for sale post with great pics and awesome parts man! shouldn't be here long!

[1sickS14]

Interested in selling the valve cover? Are you willing to part out the package?

[ForeignMuscle]

Not parting it out. Thanks.

Spent over 40 hours stripping, shaving, sanding, polishing, and welding and it was not worth it! Lol definitely my favorite part though.

[Mofuhcka]

Looks like a great engine build, bump for you

[ForeignMuscle]

New pictures added!

The engine is almost complete and ready for install.

[ForeignMuscle]

Are you willing to part out the package?

I'm sorry, I missed this post.

If someone is interested in the engine for shipping purposes that will be fine. I will only do that as a COMPLETE TURN KEY SWAP though. I can also get it shipped nearly anywhere in the continental US for $200-300.

[Mafia 6]

Free bump,very nice build..glws