s14 rear oem swaybar bracket bolts

[rb25crazy]

hi guys...

wanted to ask to see if you guys know what size the s14 rear oem swaybar bracket bolts are.

these are the quantity of 4 bolts that bolt 2 on each side of the oem swaybar.

if you know what bolt size that would be fantastic so i can pick up the right ones... im thinking it is m16 or m14 but not sure, don't want to walk to the store to find out i bought the wrong ones when the car is up.

please help thanks a bunch!
happy holidays!

[MrMcgarrett]

Should be a 12x1.25 or 12x1.5 thread pitch and around 30mm long.
I have some just don't know where I put them lol

[brndck]

12x1.25
its an uncommon pitch. a lot of hardware stores don't carry much of it.
where in cali are you? i've got bins of misc nissan bolts and can mail you some if you wanna throw me a few bones.

[jr_ss]

Next time post this in the small questions thread which can be found at the link below.

http://zilvia.net/f/chat/297481-small-questions-thread-search-first-use-instead-making-new-threads.html

[racepar1]

12x1.25
its an uncommon pitch. a lot of hardware stores don't carry much of it.
where in cali are you? i've got bins of misc nissan bolts and can mail you some if you wanna throw me a few bones.

:werd:

I have 2 5-gallon buckets and 2 coffee cans full of mostly 240 bolts.




The thread size/pitch is actually 10x1.25, NOT 12!!! The bolts for the brackets are fairly short, 20-30mm max.

The only place on a 240 that I can think of where Nissan used a 1.5 thread pitch is the bellhousing bolts. Probably somewhere on the engine as well, but I can't think of it off the top of my head.

[brndck]

/\/\/\ you might be right. 10 instead of 12.
Either way I've got buckets of the stuff. Parted out enough s-chassis to have a few spares.