Custom RB26 Turbo Manifold - T4 - (2)38mm wastegate

[itsguyguy]

Up for sale is my old turbo manifold, which is good to about 800WHP. I've gone bigger and making more power, so no need for the old manifold.



First setup was on a bolt on RB26 with a billet PT6765 which made 550 on race gas at 16lbs.

Second setup was on a race build RB26 with a billet PT7175 which was coasting around the 800+WHP mark at 22lbs of boost limited to 6000RPM. Third gear was making [email protected] capped at 6000RPM.



If you have an RB26 and want a reliable manifold, or upgrade from those two little twins, get this manifold!




The setup runs two wastegates and the pictures can explain the rest.


Wrapped to withhold the heat.


http://img.photobucket.com/albums/v499/itsguyguy/RB26%20Manifold/IMG_2629.jpg

http://img.photobucket.com/albums/v499/itsguyguy/RB26%20Manifold/IMG_2621.jpg

http://img.photobucket.com/albums/v499/itsguyguy/RB26%20Manifold/IMG_2627.jpg

http://img.photobucket.com/albums/v499/itsguyguy/RB26%20Manifold/IMG_2620.jpg

http://img.photobucket.com/albums/v499/itsguyguy/RB26%20Manifold/IMG_2628.jpg

http://img.photobucket.com/albums/v499/itsguyguy/RB26%20Manifold/IMG_2624.jpg

http://img.photobucket.com/albums/v499/itsguyguy/RB26%20Manifold/IMG_2619.jpg

http://img.photobucket.com/albums/v499/itsguyguy/RB26%20Manifold/IMG_2617.jpg

http://img.photobucket.com/albums/v499/itsguyguy/RB26%20Manifold/IMG_2618.jpg

http://img.photobucket.com/albums/v499/itsguyguy/RB26%20Manifold/IMG_2622.jpg

http://img.photobucket.com/albums/v499/itsguyguy/RB26%20Manifold/IMG_2623.jpg

http://img.photobucket.com/albums/v499/itsguyguy/RB26%20Manifold/IMG_2625.jpg




$1400 shipped to the continental 48 states, $1500 shipped to Puerto Rico, AK or HI. Will be wrapped in towels and newspaper, boxed with care, and labeled "FRAGILE" on every end of the box if shipped. Local price is $1350.

If you are serious, send me a PM that includes your email so we can further discuss the details.

[itsguyguy]

http://sphotos-b.xx.fbcdn.net/hphotos-snc7/578260_3920200163006_1574709599_n.jpg

http://sphotos-b.xx.fbcdn.net/hphotos-ash4/306164_3920197882949_1438881651_n.jpg


Old setup, this is how a 7175 would look mounted onto your RB26 with this manifold!

[ryandh]

I want this... but I'm broke. I have an old greddy cast iron twin top mount manifold to trade if you're interested

[itsguyguy]

Thanks for the offer, but I'll pass.




http://img.photobucket.com/albums/v499/itsguyguy/RB26%20Manifold/IMG_2536.jpg

[inifinity]

Fit an rb25?

[OutToWinPAHC]

Very similar to mine, which is a single WG and that cost about 2 grand to have fabbed, will not fit a 25 tho the flange patter in different

[itsguyguy]

You speak truth.


It was a pretty penny to get this first one done.
Second one was a little more.

[itsguyguy]

First bump! Get a single + supporting mods with this manifold to make a consistent 800WHP!




If you have an RB26, don't cheap out on a Chinese manifold!
Get this quality manifold!

[itsguyguy]

After Christmas bump. Don't spend over $2300 to get one custom made when you can get this one for almost half the price!

[itsguyguy]

To the top.

[seagrasser]

Wish this fit a 25...free bump

[itsguyguy]

Bump this to the top!




For all you 26 gentlemen who want to either upgrade to a single turbo or get a new manifold with dual waste gates at a killer price, jump on it!