S13 240sx PART OUT (Aftermarket,cage, coils, EVERYTHING must GO)

[roushman90]

All parts are off the car and ready to be picked up. Willing to ship some items, but buyer covers costs. Prices are pretty firm, pick up available in Bay Area, CA. I am open to trades, check down below for my wanted parts list.

Contact:
510-566-5296
[email protected] (Paypal e-mail)

KA Parts:

KA SOHC/DOHC starter $40
KA DOHC EGR components ASK
SR/KA OEM Nissan injector "O" rings BRAND NEW $15
KA DOHC header $10
SOHC KA injectors $5 each
DOHC KA injectors $5 each
S13 Alternator fuse $5 each
S13 Relays $5 each
S13 KA lower trans harness (Auto converted to Manual) $40

S-13 Suspension & Steering:

S13 OEM USDM rear sway bar $10
S13 OEM RUCA (2) $10




S-13 Interior/Exterior parts:
Rear S13 OEM seatbelts $10
Passenger side manual window assembly w/ window $20
S13 fastback interior pieces ASK
Rear speaker brackets and covers $25
Weather stripping (all) ASK
S13 OEM tail lights, all cracked $5 each
Climate Control $40
Interior quarter window paneling $20
Center console $20
Gauge bezel $20
Exterior trim $10 each
Manual door panel, passenger side, black $20
Window cranks $5 each
Fuel hard lines front to back $50
Brake hard lines front to back $40
S13 gas pedal $25

SR parts:
Isis polished Intake Manifold (Used) $160/trade
Sr20det OEM IACV $40
SR OEM Intake Manifold (Bare, no iacv/tps) $20
SR OEM Throttle Body Pending
Random SR hotpipe, polished aluminum $20


PARTS I WILL CONSIDER TRADES FOR:
550cc sti yellow injectors
SAFC
Coolant reservoir
Boost, Oil temperature, water temperature, Oil pressure gauge
Boost controller
Tires/Rims, 15", 16", 16", 18"
Wideband


http://farm9.staticflickr.com/8075/8290202728_e5be60bee1_b.jpg (http://www.flickr.com/photos/travisroush/8290202728/)
Zilvia part out (http://www.flickr.com/photos/travisroush/8290202728/) by roushman90 (http://www.flickr.com/people/travisroush/),



Clean S13 sun visors, gray SOLD
Engine Harness $100 SOLD
OEM S13 E-brake cables, still locked my rear up fine, not stretched out, never over tightened SOLD
OEM S13 e-brake assembly $10 SOLD
S14 seat belts(PAIR) $50 SOLD
Kazama inner AND outer tie rod setup $200 SOLD
Tein S13 super drift coilovers in good condition, no leaks. $1200OBO SOLD
Chassis Harness $100 SOLD
Plated weld R200 S13 diff $100 SOLD
Muteki tuner nuts w/ key $25 SOLD
Test pipe $20 SOLD
Rear subframe $80 SOLD
OEM traction rods $15 SOLD
OEM toe rods $15 SOLD
Shifter trim $15 SOLD
Hatch with glass $40 SOLD
BN Style pop up front bumper $100obo SOLD
Buddy Club super low rail, s13, driver side $125 SOLD
Walbro 255 fuel pump in S13 pump assembly $60 SOLD
Passenger seat $20 SOLD
N60 maf $40 SOLD
Buddy Club Spec II, tip was scraped, not perfect $200 SOLD
SR 370cc injectors $100 SOLD
S13 stock driver seat $10 SOLD
VIS carbon fiber vented S13 hood $25 SOLD
KA trans, rebuilt WITH receipts from this last year $200 SOLD
Axles $40/each both for $60 SOLD
Aftermarket RUCAs $40 SOLD
NRG short hub $40 SOLD
OEM cat (passed smog) $50 SOLD
Gauge cluster $30 SOLD
Manual brake pedal $20 SOLD
AutoMeter boost gauge $40 SOLD
KA24DE motor & clutch/flywheel stage 1 SOLD
B&M KA/SR short shifter $150 SOLD
KA DC sport header $125 SOLD
Rear bumper $20 SOLD
Pignose front bumper, silver, $25 SOLD
Glovebox $10 SOLD
SOHC dark gray "tweed" carpet $50 SOLD
Clutch Pedal $25 SOLD
Clutch master $10 SOLD
SS clutch line & slave $30 SOLD
Rear Overfenders $100 SOLD
S13 rear strut bar $25 SOLD
Front strut bar $25 SOLD
Rear c-pillar bar $25 SOLD
Trans crossmember $10 SOLD
Battery relocation wire with pos terminal $10 SOLD
Heater core, works, $20 PENDING
OEM ka intake $10 SOLD
White bunny KA clutch/flywheel setup $125 SOLD
Eibach Sportline springs on KYB GR-2 setup SOLD

[shinnkv]

Do you have privacy cover or moon roof cover?

[roushman90]

Do you have privacy cover or moon roof cover?

No sir, no privacy cover and no moon roof cover as this was a non-sunroof model. Thanks for the inquiry!

[NorCal420sxDrifter]

How many miles on kade after rebuild? Might be intrested in engine and harness. Engine runs good no leaks, good compression?

[roushman90]

How many miles on kade after rebuild? Might be intrested in engine and harness. Engine runs good no leaks, good compression?

Honestly not sure how many miles, got the motor out of his car when he just went SR. I've driven a ton of KAs and this one is the strongest one I've ever came upon. No leaks besides valve cover, bring a compression tester as I don't have one to test but it was running when pulled, and I have video of it getting down last month like an SR and the last event I drifted. This motor is a local legend HAHA.

[NorCal420sxDrifter]

Sounds good man....how long did u run it? U goin sr too?

[roushman90]

Sounds good man....how long did u run it? U goin sr too?

Finally put the last nail in the coffin for this shell, moving on to new chassis new motor. I literally had it in my car like two months. Ran it with header, stock intake, and Walbro 255 and man it got DOWN.

[NorCal420sxDrifter]

Cool man i think i want it.....where u located? Would there be alot of shit to do since im only single cam right now? Wireharness and ecu is all i can think of...oh and ps lines i heard are bigger.

[roushman90]

Cool man i think i want it.....where u located? Would there be alot of shit to do since im only single cam right now? Wireharness and ecu is all i can think of...oh and ps lines i heard are bigger.

I never had to deal with SOHC>DOHC swap, but here is a link:
Ka24E (SOHC) to Ka24DE (DOHC) F.A.Q.~ - Nissan 240SX Forums (http://www.240sxforums.com/forums/s13-240sx-89-94/18388-ka24e-sohc-ka24de-dohc-f-q.html)

I'm located in Hayward, and I'm sure I'd have everything you need to rock it out, motor is only missing distributor, clutch fan, p/s pump.

I think in addition to the motor, you would also need:
DOHC engine harness
DOHC coil
DOHC tach, throttle cable
DOHC maf

[NorCal420sxDrifter]

Cool thanks for the link....well i gotta wait til friday when i get paid so if u havent sold it i will definity come take a look...most likely will buy. Thanks

[Gamma]

yo load pix of manual door panels interested

[88Coupe]

Still have the coils? Pm me if you do.

[roushman90]

Cool thanks for the link....well i gotta wait til friday when i get paid so if u havent sold it i will definity come take a look...most likely will buy. Thanks

For sure, this motor will not disappoint! It tandem'd with Matt Field, Ryan Bell, Calvin Wan and tons of others, never failed to keep me on their door!

yo load pix of manual door panels interested
Getting pics hopefully this afternoon, they are pretty clean. I think driver side has a little bit of small crack on top from sun, not sure though.

Still have the coils? Pm me if you do.
Still available, sending PM.


Also, general note, please don't ask me to hold parts UNLESS you paypal me the full price! I don't have time for flakes!

[ShadowDrifter]

(510)-566-5296 Text for more info, pics, etc.[/QUOTE]

No asking text for pics ect please read the rules

[roushman90]

(510)-566-5296 Text for more info, pics, etc.

No asking text for pics ect please read the rules[/QUOTE]

Happy now? Pictures added.

[Lvnismo]

still got the tranny?

[roushman90]

still got the tranny?

Pending sale

[Dr.Nismo]

still got the complete engine trans ecu what price r u looking for?

[roushman90]

still got the complete engine trans ecu what price r u looking for?

KA24DE motor, EGR delete, rebuilt,mild port&polished, unneccesary butterfly shit on back of motor deleted, with all accessories except p/s & dizzy. Comes with Stage 1 Exedy clutch kit, good life left $500

KA trans, rebuilt WITH receipts from this last year $200 PENDING

Auto s13 ECU $40

$740. Transmission is pending sale, complete motor and ECU still up for grabs.

[flatout]

How old is that shifter it looks like its in good shape

Sent from my Galaxy Nexus using Tapatalk 2

[1jzjoey]

i need center vent for dash and also defroster vents, got them?

[Zeppelinrok75]

How much for the light assembly that goes over the rear license plate shipped to 22901 if you still have it?

[roushman90]

How old is that shifter it looks like its in good shape

Sent from my Galaxy Nexus using Tapatalk 2


Used probably 5k miles, but kept it in good condition.

i need center vent for dash and also defroster vents, got them?

I believe so, but what do you mean by defroster vents?

How much for the light assembly that goes over the rear license plate shipped to 22901 if you still have it?


$15, but I'd have to get a shipping quote

[ersus]

How much for the shifter trim shipped to DORAL, FLORIDA 33126

[roushman90]

How much for the shifter trim shipped to DORAL, FLORIDA 33126

Sold msglngthhhh

[Wanabe]

Hey it's Palmer are you going to winter jam? I might want that walbro.

[roushman90]

Hey it's Palmer are you going to winter jam? I might want that walbro.


What's up man! I don't think I'm going to Winter Jam, but I could possibly try to get someone that's going to deliver it! LOL

[wangan_cruiser]

bump up top for fellow local driver


legit seller can vouch

[retrograde.]

Mileage on engine? Any cons?

[Bambi]

still have the nismo pipe?

[bova17]

shifter rubber boot with metal ring (http://www.flickr.com/photos/travisroush/8285473221/) and the shift boot cover and ring for that also, $15 shipped to 45247

[roushman90]

bump up top for fellow local driver

legit seller can vouch

Thanks!

Mileage on engine? Any cons?

Mileage, I don't know, came as a donor motor from my friends car when he went SR not too long ago, was rebuilt under his ownership and mild port/polish. Strongest KA I've ever driven. Ran it with Buddy Club Spec II, test pipe, EGR delete, Walbro 255.
still have the nismo pipe?

shifter rubber boot with metal ring (http://www.flickr.com/photos/travisroush/8285473221/) and the shift boot cover and ring for that also, $15 shipped to 45247

I can do $20 shipped to 45247, let me know.

PayPal e-mail is [email protected]

[bova17]

decided to buy more stufff
Clutch Pedal $25
Clutch master $10
SS clutch line & slave $30
shifter rubber boot $20
manual brake pedal?
shifter boot and mounting bracket?
hows the white bunny clutch and flywheel?

[roushman90]

Had to split my pictures because a 50 picture limit on Zilvia, sorry guys.


http://farm9.staticflickr.com/8071/8285474509_922f35b599_b.jpg (http://www.flickr.com/photos/travisroush/8285474509/)
Zilvia PARTOUT (http://www.flickr.com/photos/travisroush/8285474509/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8065/8285473221_b308016d0f_b.jpg (http://www.flickr.com/photos/travisroush/8285473221/)
Zilvia PARTOUT (http://www.flickr.com/photos/travisroush/8285473221/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8498/8286528124_bf5df684b5_b.jpg (http://www.flickr.com/photos/travisroush/8286528124/)
Zilvia PARTOUT (http://www.flickr.com/photos/travisroush/8286528124/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8363/8286525602_417cfd15db_b.jpg (http://www.flickr.com/photos/travisroush/8286525602/)
Zilvia PARTOUT (http://www.flickr.com/photos/travisroush/8286525602/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8494/8285467341_e6887ddce7_b.jpg (http://www.flickr.com/photos/travisroush/8285467341/)
Zilvia PARTOUT (http://www.flickr.com/photos/travisroush/8285467341/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8197/8286522956_49a76fdb00_b.jpg (http://www.flickr.com/photos/travisroush/8286522956/)
Zilvia PARTOUT (http://www.flickr.com/photos/travisroush/8286522956/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8059/8286520774_fc4d172c48_b.jpg (http://www.flickr.com/photos/travisroush/8286520774/)
Zilvia PARTOUT (http://www.flickr.com/photos/travisroush/8286520774/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8216/8286519660_3368e8cfbf_b.jpg (http://www.flickr.com/photos/travisroush/8286519660/)
Zilvia PARTOUT (http://www.flickr.com/photos/travisroush/8286519660/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8217/8286517882_988a05552b_b.jpg (http://www.flickr.com/photos/travisroush/8286517882/)
Zilvia PARTOUT (http://www.flickr.com/photos/travisroush/8286517882/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8059/8285570675_8a5cdece54_b.jpg (http://www.flickr.com/photos/travisroush/8285570675/)
Zilvia PARTOUT (http://www.flickr.com/photos/travisroush/8285570675/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8343/8286638294_c128f8dd92_b.jpg (http://www.flickr.com/photos/travisroush/8286638294/)
Zilvia PARTOUT (http://www.flickr.com/photos/travisroush/8286638294/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8057/8285577895_1b8f7b6d8e_b.jpg (http://www.flickr.com/photos/travisroush/8285577895/)
Zilvia PARTOUT (http://www.flickr.com/photos/travisroush/8285577895/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8082/8286630636_31cef341f3_b.jpg (http://www.flickr.com/photos/travisroush/8286630636/)
Zilvia PARTOUT (http://www.flickr.com/photos/travisroush/8286630636/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8072/8286632160_a368c8b6f0_b.jpg (http://www.flickr.com/photos/travisroush/8286632160/)
Zilvia PARTOUT (http://www.flickr.com/photos/travisroush/8286632160/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8498/8286633332_3986f60480_b.jpg (http://www.flickr.com/photos/travisroush/8286633332/)
Zilvia PARTOUT (http://www.flickr.com/photos/travisroush/8286633332/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr

[roushman90]

decided to buy more stufff
Clutch Pedal $25
Clutch master $10
SS clutch line & slave $30

^This stuff I have pending sale to a friend.

shifter rubber boot $20
manual brake pedal?

^These I have, the brake pedal is a auto pedal cut to manual size, with a manual cover on it.

shifter boot and mounting bracket?

^ Don't have shift boot nor bracket.

hows the white bunny clutch and flywheel?

^ The clutch and flywheel are in good condition, plenty of life left, setup is good for 400+ horsepower.


PLEASE LOOK THROUGH WHOLE THREAD TO SEE SECOND SET OF PICS, ZILVIA WOULDN'T LET ME POST ALL IN THE OP!

[moth]

still got the ka? send me info 323 691 0313

[iVanRoz]

Did the transmission ever sell? Also will it bolt up directly to the sohc? Or will you have to swap bell housings ?

[CeezS13]

Do you happen to have the rubber piece that connects the pop up headlight to the headlight motor for driver side?

[roushman90]

still got the ka? send me info 323 691 0313

I'm in NorCal, I'm not shipping the motor

Did the transmission ever sell? Also will it bolt up directly to the sohc? Or will you have to swap bell housings ?

It's pending sale, if he doesn't get it today, I'm moving on to whoever wants it. It will bolt up to SOHC,same thing.

Do you happen to have the rubber piece that connects the pop up headlight to the headlight motor for driver side?

Not sure I know what you're talking about. I'll have to look at a headlight, may have it!

[roushman90]

To everyone messaging me about motor and transmission, they are now sold along with the B&M, carpet, and tons of other stuff. I update the OP, if it doesn't say sold I should still have it, and if you're looking for something else you think I may have feel free to ask! Coilovers, Recaro, cage still available!

[khon240sx]

how much is wiper switch?

(shipped to 19082)

[smokin18]

do u still have the test pipe???

[roushman90]

how much is wiper switch?

(shipped to 19082)

$10 plus shipping, probably like $15



do u still have the test pipe???


Yeah

[roushman90]

Bump! Updated OP with MORE parts, updated stuff I sold! Still lots to go! There isn't a nut or bolt left on the chassis. It's off to the scrap yard!

[roushman90]

Make offers, need Xmas money

[roushman90]

http://farm9.staticflickr.com/8494/8294252987_c81e5d0989_c.jpg (http://www.flickr.com/photos/travisroush/8294252987/)
Recaro&coils (http://www.flickr.com/photos/travisroush/8294252987/) by roushman90 (http://www.flickr.com/people/travisroush/)
http://farm9.staticflickr.com/8355/8294251539_409f571005_c.jpg (http://www.flickr.com/photos/travisroush/8294251539/)
Recaro&coils (http://www.flickr.com/photos/travisroush/8294251539/) by roushman90 (http://www.flickr.com/people/travisroush/)
http://farm9.staticflickr.com/8500/8294249083_988d957efe_c.jpg (http://www.flickr.com/photos/travisroush/8294249083/)
Recaro&coils (http://www.flickr.com/photos/travisroush/8294249083/) by roushman90 (http://www.flickr.com/people/travisroush/)
http://farm9.staticflickr.com/8223/8294231749_78383f3538_c.jpg (http://www.flickr.com/photos/travisroush/8294231749/)
Recaro&coils (http://www.flickr.com/photos/travisroush/8294231749/) by roushman90 (http://www.flickr.com/people/travisroush/)
http://farm9.staticflickr.com/8075/8294229727_16f17f7e8e_c.jpg (http://www.flickr.com/photos/travisroush/8294229727/)
Recaro&coils (http://www.flickr.com/photos/travisroush/8294229727/) by roushman90 (http://www.flickr.com/people/travisroush/)
http://farm9.staticflickr.com/8213/8294227829_e2611e42b8_c.jpg (http://www.flickr.com/photos/travisroush/8294227829/)
Recaro&coils (http://www.flickr.com/photos/travisroush/8294227829/) by roushman90 (http://www.flickr.com/people/travisroush/)


Here are some pictures of brake booster, KA starter (working condition), steering rack, manual driveshaft, and front spindle/caliper/rotors! Let me know if you are looking for something, took EVERY single part off my hatch. Down to nuts and bolts, then scrapped the shell.

[its yo boy 240]

Ill take the walbro if ur willing to wait till the jan. 1st?

[roushman90]

Ill take the walbro if ur willing to wait till the jan. 1st?

Sorry man, I just sold the Walbro to my buddy yesterday! =(

[roushman90]

Better pictures of the tie rods, and pictures of the chassis harness!

Shoot me offers!

http://farm9.staticflickr.com/8081/8304087175_5d397d80b8_c.jpg (http://www.flickr.com/photos/travisroush/8304087175/)
More parts (http://www.flickr.com/photos/travisroush/8304087175/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8360/8305133488_2c8bf3c8be_c.jpg (http://www.flickr.com/photos/travisroush/8305133488/)
More parts (http://www.flickr.com/photos/travisroush/8305133488/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8074/8304083573_0a54855cc6_c.jpg (http://www.flickr.com/photos/travisroush/8304083573/)
More parts (http://www.flickr.com/photos/travisroush/8304083573/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8077/8304081637_a0e97c18c6_c.jpg (http://www.flickr.com/photos/travisroush/8304081637/)
More parts (http://www.flickr.com/photos/travisroush/8304081637/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8218/8304079915_9eac58e59c_c.jpg (http://www.flickr.com/photos/travisroush/8304079915/)
More parts (http://www.flickr.com/photos/travisroush/8304079915/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8082/8305138038_4bc28f4e16_c.jpg (http://www.flickr.com/photos/travisroush/8305138038/)
More parts (http://www.flickr.com/photos/travisroush/8305138038/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr
http://farm9.staticflickr.com/8353/8304088737_e8ae677ac6_c.jpg (http://www.flickr.com/photos/travisroush/8304088737/)
More parts (http://www.flickr.com/photos/travisroush/8304088737/) by roushman90 (http://www.flickr.com/people/travisroush/), on Flickr

[Bambi]

payment sent for piipe

[roushman90]

Bambi, it's $20 plus shipping

[jamg]

can you do 120 shipped for the buddy club drivers side rails and a pair of front s13 speakers that work?

[Lil_D]

Bump for legit seller.

[roushman90]

can you do 120 shipped for the buddy club drivers side rails and a pair of front s13 speakers that work?

PM sent.


Bump for legit seller.

Thanks ;)

[240lover12445]

Hey how much for the rotors? And do you still have the flywheel?

[Bambi]

Bambi, it's $20 plus shipping

So, how much for shipping?

[roushman90]

Hey how much for the rotors? And do you still have the flywheel?

The rotors aren't really much life left, need resurface I was going to throw them in with the hubs really.

The flywheel is sold unfortunately.


So, how much for shipping?

$20 for testpipe, $10 shipping. $30 shipped.

[neverliftracingteam]

Do you have the whole wiring harness for the twin cam KA, i am doing the swap from my single cam, and it looks like you have the nicest wiring harness on here i have seen, it isnt all hacked up and tore back, but I can't tell if everything is there. If you could get back to me i would appeciate it. Thanks for your time - Chris / NLRT

[roushman90]

Do you have the whole wiring harness for the twin cam KA, i am doing the swap from my single cam, and it looks like you have the nicest wiring harness on here i have seen, it isnt all hacked up and tore back, but I can't tell if everything is there. If you could get back to me i would appeciate it. Thanks for your time - Chris / NLRT

I still have it, looking for a nice box to ship it in. It is complete, undamaged. Pulled it out of my wrecked S13 without cutting it. Only thing missing is driver side plugs for corner lights and front left bumper light, that part of harness got caught in my tire way back when, never bothered replacing it.

Anyways, PM sent!

[previa19]

still got chassis harness? would you split it, i just need the section that runs from interior fusebox to the engine bay fusebox as long as its from a 5 speed chassis

also interested in rear seat belts too but dont think thatll fit my coupe.

[roushman90]

still got chassis harness? would you split it, i just need the section that runs from interior fusebox to the engine bay fusebox as long as its from a 5 speed chassis

also interested in rear seat belts too but dont think thatll fit my coupe.


Not looking to split it up, selling it complete first of all, second of all, it's originally an automatic harness, but I 5speed swapped it so it would work for a 5speed setup.

The rear belts, I do believe are different for coupes.

[driftracerx]

do you have a short hub for sale ?

[roushman90]

do you have a short hub for sale ?

I had an NRG, but it's sold sorry

[mgramata]

Have a ka MAF by a chance?

[roushman90]

Have a ka MAF by a chance?

Yes, DOHC S13 KA

[Adam496]

Still have the lug nuts? Are they open, closed?

[Lhimes]

in need of the metal ring with with rubber under the center console for shift boot. pm me if you have this for sale. Thanks.

[roushman90]

Still have the lug nuts? Are they open, closed?

Pending sale, they are black, and open ended.

in need of the metal ring with with rubber under the center console for shift boot. pm me if you have this for sale. Thanks.

I do have this but minus the metal ring and it is pending local sale.

[silviadrag]

I need the brackets and bolts that holds the rack

[jeremyuhh]

still have the speakers?

[xwizkidx]

Is the fender one from a pignose? ie. without the mounting holes for the bumper extensions? if so im interested if its without rust and major dents

[chriz2222]

you still have the driver and passenger doors? pm me

[roushman90]

I need the brackets and bolts that holds the rack

Have brackets but I'm not sure I have the bolts

still have the speakers?

Yes

Is the fender one from a pignose? ie. without the mounting holes for the bumper extensions? if so im interested if its without rust and major dents

Ah, I think these are Chuki fenders, and I'm not shipping them anyways

you still have the driver and passenger doors? pm me

Driver door yes, but I am NOT shipping the door.

[5-Speeder]

Do you still have the EGR parts in one piece? Interested in picking them up if you do.

[roushman90]

Do you still have the EGR parts in one piece? Interested in picking them up if you do.

What do you mean in one piece? The EGR system is a bunch of parts. What exactly do you need? Give me a call or text to arrange pick up! I know for sure I still have the EGR valve, think I have the pipe, and I also have the other components that bolt to the driver shock tower near the header. So let me know.

[5-Speeder]

I specifically need the EGR tube that runs from the valve to the exhaust manifold and the other tube attached further down, I think it's called the PAIR tube.

[roushman90]

I specifically need the EGR tube that runs from the valve to the exhaust manifold and the other tube attached further down, I think it's called the PAIR tube.


I believe I have that tube that runs behind motor, the other tube as well, I'll have a look.

[garyklovesla]

y hub or quick realse for sale??

[roushman90]

y hub or quick realse for sale??

Hub sold, no quick release sorry.

[dkim1985]

did you sell that EGR pipe(exhaust header to valve) to that guy or still available?

[ov1989]

pm'd you man

[s4cxnick]

rear s13 caliper? drivers side.. will you part? and the alt fuse if you still have it. throw me a pm

[roushman90]

did you sell that EGR pipe(exhaust header to valve) to that guy or still available?

I can check

pm'd you man

K

rear s13 caliper? drivers side.. will you part? and the alt fuse if you still have it. throw me a pm

Selling rear caliper as a pair. Not asking too much for the pair though. I have plenty of alternator fuses as well.

[mightys88]

how much for engine??????

[roushman90]

how much for engine??????


SOLD msglngthhhh

[ze12o]

S13 rlca still available? How's the condition if you still have them. Thanks

[Turtle]

Engine cross member
give me price if selling
you can reach me at 760 486 7322

[Grimmiee]

Hey, interested in the sohc header, condition? Does it actually have the flange at the bottom??

[Grimmiee]

Didn't mean to post that twice lol

[Blitz671]

PM'd you about the steering rack

[idc101]

still got that lower engine harness?

[kamryn]

The passenger side fender. I would give you 30 just cause I want it that much. lol.

[roushman90]

still got that lower engine harness?

Possibly, but it was originally an auto, so not much use if you already have an auto harness.

The passenger side fender. I would give you 30 just cause I want it that much. lol.

Not shipping the fender sorry

[unknowns13]

engine harness, sohc or dohc? pm me please

[LuckyRPS13]

PM sent, Paypal ready

[fsuarez]

i took one of the photos you posted up and circled what i need; they are from passenger side right?

>basically i need the plastic for the pop up light
>the lid for the passenger headlight (top part of the headlight has four screws on the side)
>and the arm that connects the motor to the headlight (has to circular plastics on each side)

let me know how much shipped to los angeles, 90031; ill pay you via paypal

[fsuarez]

i took one of the photos you posted up and circled what i need; they are from passenger side right?

>basically i need the plastic for the pop up light
>the lid for the passenger headlight (top part of the headlight has four screws on the side)
>and the arm that connects the motor to the headlight (has to circular plastics on each side)

let me know how much shipped to los angeles, 90031; ill pay you via paypal

oh also do you have the the button that goes on the dashboard under the pop up lights button, behind the directional

[TheNextAzn]

Interested in ur climate control n ext. trim(if u mean side mouldings). I actually need a lot of stuff and I'm in the bay.. Lmk if ud be available for me to shop! Lol

[roushman90]

still got that lower engine harness?

I actually found a manual lower harness today.

Interested in ur climate control n ext. trim(if u mean side mouldings). I actually need a lot of stuff and I'm in the bay.. Lmk if ud be available for me to shop! Lol

I have the climate control and yes I mean the side moldings. Let me know if you still need these. Sorry for late reply!

oh also do you have the the button that goes on the dashboard under the pop up lights button, behind the directional

I might have this, I'll try to check tomorrow!



Consider this my welcoming myself back to the S-chassis game! I'm baaack!

[Hoffman5982]

Do you have the s13 shifter boot retainer? Looks like this(plastic retainer inside boot):
http://i2.frsimg.com/images/detailed_images/Nissan_ShiftBoot_6.jpg

[roushman90]

Do you have the s13 shifter boot retainer? Looks like this(plastic retainer inside boot):
http://i2.frsimg.com/images/detailed_images/Nissan_ShiftBoot_6.jpg


No, those are usually broken and thrown away

[Yahshua92]

What's up with sohc egr components? AICV how much shipped to 85730? Have pics of it?

[roushman90]

What's up with sohc egr components? AICV how much shipped to 85730? Have pics of it?

I don't have single cam EGR parts but one of my friends does I believe, I'll see if he's willing to ship. You only need aicv for SOHC?

[roushman90]

Have a stock S13 exhaust with fairly new Catco catalytic, $150

[rdoni2]

What kind of wideband pm me!

[roushman90]

What kind of wideband pm me!

Try reading the ad again.

[fsuarez]

do you still have the climate control for s13?

[scottie]

PM Sent. Looking for a manual passenger window regulator/window track.

[DennisS]

Ill take the ka sohc injectors shipped to 19006

[roushman90]

do you still have the climate control for s13?

Yes.

PM Sent. Looking for a manual passenger window regulator/window track.

I'll have to take a look at what I've got left of the window

Ill take the ka sohc injectors shipped to 19006

I'll let you know if I still have a full set.

[roushman90]

Original post edited, added Isis intake manifold, DOHC ka manifold OEM. Open to trades check out my possible wanted parts list!

[roushman90]

Isis intake manifold added, $150 obo, shoot me offers!