rb25_s13*CHUKI
12-07-2012, 06:43 PM
I'm selling my fully sr20 bolt on turbo setup pieced together by me!! Setup is flawless and great!!
The setup comes with the following
Hks 555 injectors
Circuit sport fpr with adaptor
Gsp 50 trim turbo
Custom RMS Turbo manifold
Earls oil feed and oil return lines with An fitting to the block
down pipe with two bungs for oem o2 and the bung for a wide band set at 3 o clock. This down pipe bolts to your standard 3 inch sr20 down pipe for stock turbo setups.
Z32 maf with pig tail
gsp wastegate
Full Stainless steel gaskets on waste gate/dump tube and turbo
Ecu tuned for the setup runs 14.2/14.8 afr driving and 11.2/11.8 wot
Full Fmic setup for this kit with piping to match the turbo!
Fmic comes with a Greddy type R blow off valve
Glow shift boost gauge
Auto meter water temp gauge
Whole setup has no more than 2k miles
this setup made 375 whp on mustang dyno @20 lbs. Bone stock Sr20 block and head/intake manifold and cams.
You can text me at 626 476 6855
I'll post pictures tomorrow!! Its a plug and play setup
The setup comes with the following
Hks 555 injectors
Circuit sport fpr with adaptor
Gsp 50 trim turbo
Custom RMS Turbo manifold
Earls oil feed and oil return lines with An fitting to the block
down pipe with two bungs for oem o2 and the bung for a wide band set at 3 o clock. This down pipe bolts to your standard 3 inch sr20 down pipe for stock turbo setups.
Z32 maf with pig tail
gsp wastegate
Full Stainless steel gaskets on waste gate/dump tube and turbo
Ecu tuned for the setup runs 14.2/14.8 afr driving and 11.2/11.8 wot
Full Fmic setup for this kit with piping to match the turbo!
Fmic comes with a Greddy type R blow off valve
Glow shift boost gauge
Auto meter water temp gauge
Whole setup has no more than 2k miles
this setup made 375 whp on mustang dyno @20 lbs. Bone stock Sr20 block and head/intake manifold and cams.
You can text me at 626 476 6855
I'll post pictures tomorrow!! Its a plug and play setup