switchfootvz
12-06-2012, 11:37 AM
SSR Linea Sport Club VIP
Made by SSR
Branded: under Linea Sport
Model: CLUB VIP
Specs: 18x8.5 +47 18x9.5+41 (4 and 5 lug) Will include 15mm Spacer
Condition: 9.5/10 Has been fully refinished. Has had about 100 miles on them. Had cracks from previous owner but has been fixed. The inner and outer barrels have been fully polished. Faces have been painted with quality automative paint, the paint code: is a honda color. The Front bolts have been handed polished, rear nuts are brand new stainless steel, center cap hardware are new. Center cap has been refinished.
They can come with tires but i do not suggest to use them.
I spent over 40 hours in refinishing the whole set. I did not cheap out when i rebuilt the wheels. I found another set of wheels in a better spec so that is the reason for selling.
Side note... Fitment will be totally different for you guys since most of you are on coils and not on air. So, please don't expect the same result. Your should except some poke on the rear.
6mm is required to clear the rear trailing arm.
I'm asking 3000 or obo.
Front wheel
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/471834_382569418432487_1994170134_o.jpg
Fitment (just running a 6mm spacer all around)
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/466238_379512145404881_27697131_o.jpg
Front Fitment (with 30mm spacers)
https://sphotos-a.xx.fbcdn.net/hphotos-snc6/616730_447285741960854_484567313_o.jpg
Rear Wheel upclose
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/627310_458575984165163_1417875133_o.jpg
Fitment with semi tuck
https://sphotos-b.xx.fbcdn.net/hphotos-snc7/478555_458575870831841_151461235_o.jpg
Fitment aired up
https://sphotos-a.xx.fbcdn.net/hphotos-snc6/278866_458575744165187_799140607_o.jpg
Fitment aired out
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/169526_458575684165193_1248364179_o.jpg
Made by SSR
Branded: under Linea Sport
Model: CLUB VIP
Specs: 18x8.5 +47 18x9.5+41 (4 and 5 lug) Will include 15mm Spacer
Condition: 9.5/10 Has been fully refinished. Has had about 100 miles on them. Had cracks from previous owner but has been fixed. The inner and outer barrels have been fully polished. Faces have been painted with quality automative paint, the paint code: is a honda color. The Front bolts have been handed polished, rear nuts are brand new stainless steel, center cap hardware are new. Center cap has been refinished.
They can come with tires but i do not suggest to use them.
I spent over 40 hours in refinishing the whole set. I did not cheap out when i rebuilt the wheels. I found another set of wheels in a better spec so that is the reason for selling.
Side note... Fitment will be totally different for you guys since most of you are on coils and not on air. So, please don't expect the same result. Your should except some poke on the rear.
6mm is required to clear the rear trailing arm.
I'm asking 3000 or obo.
Front wheel
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/471834_382569418432487_1994170134_o.jpg
Fitment (just running a 6mm spacer all around)
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/466238_379512145404881_27697131_o.jpg
Front Fitment (with 30mm spacers)
https://sphotos-a.xx.fbcdn.net/hphotos-snc6/616730_447285741960854_484567313_o.jpg
Rear Wheel upclose
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/627310_458575984165163_1417875133_o.jpg
Fitment with semi tuck
https://sphotos-b.xx.fbcdn.net/hphotos-snc7/478555_458575870831841_151461235_o.jpg
Fitment aired up
https://sphotos-a.xx.fbcdn.net/hphotos-snc6/278866_458575744165187_799140607_o.jpg
Fitment aired out
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/169526_458575684165193_1248364179_o.jpg