PDA

View Full Version : Help me identify plugs/wires?


StryfeS13
12-04-2012, 11:33 PM
So I pulled out my fuse box harness today to begin my relocation but I noticed a few things wrong with it.

First off, alllll of these wires were cut and taped up near my passenger side fuse box.

http://i1177.photobucket.com/albums/x343/Sickfire/CAM00748.jpg

They lead back into the harness where it enters the passenger side of the firewall

http://i1177.photobucket.com/albums/x343/Sickfire/CAM00749.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/CAM00750.jpg

Next, these wires are cut near the fuse box.

http://i1177.photobucket.com/albums/x343/Sickfire/CAM00751.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/CAM00752.jpg

One of those wires go to one of these plugs (E18, E19) that plug in near the fusebox.

http://i1177.photobucket.com/albums/x343/Sickfire/CAM00753.jpg

I mean, the car ran with all this shit cut out but what is all of it and can I leave it all cut out?



Also, I bought a spare harness just in case I fuck this one up and it's different than mine check it out.

Here is mine(minimal wiring):

http://i1177.photobucket.com/albums/x343/Sickfire/CAM00742.jpg

Here is the spare I bought(what the fuck!):

http://i1177.photobucket.com/albums/x343/Sickfire/CAM00744.jpg

StryfeS13
12-05-2012, 10:14 AM
Anyone know?

StryfeS13
12-05-2012, 07:49 PM
Cant seem to find a diagram that shows this harness..Ive searched around and all I can find is diagrams that label connectors but not individual wires or where they go to. IDK.

Just need to figure out what these cut ass wires are.

StryfeS13
12-05-2012, 09:05 PM
Okay so I've been searching around more and figured out my black/yellow and black/white wires that are cut should be going to the S13 blue starter relay.

This:
http://t3.gstatic.com/images?q=tbn:ANd9GcRUupQP8EHy__RttV1IH_eEOI16cNxkI fzq1CVoRRsYQldjESwARDG6eJY7ag

Mine didn't even have it. But my car was push button start, so maybe they bypassed it, if that's a possibility? I might just leave it push button start I kinda liked it. If that's the case can I just leave those wires cut?

Still need to figure out what that big bundle of cut wires are. I think it may be air condition shit.

humilde_s13
12-05-2012, 09:55 PM
http://i1177.photobucket.com/albums/x343/Sickfire/CAM00744.jpg

wtf is all this shit wires, blue ecu looking connector goes to a some type of module as wheel as the black small one. white should connect to engine harness. blue small connector is a relay. other black one have no idea. hope this helps a bit.

StryfeS13
12-05-2012, 10:19 PM
Thanks. That's actually not the harness I'm using. That's my spare one I bought that is a lot different than mine. I think it's for the ABS model.

I'm just trying to figure out what those cut wires I have are now...the purple, orange, fat grey, green, green/white, blue/white, red/grey, etc. When I look at wiring diagrams some of the wiring colors match "Data Link Connector for Consult" but IDK

StryfeS13
12-06-2012, 03:20 PM
Okay. So the cut wires are the ATCU according to a few people on Nicoclub. Can anyone verify?

I didn't even know this car used to be an auto! And is there any reason the starter relay wires would be cut like that other than the install of a push button start or something?