PDA

View Full Version : CA TURBOREADY E36 socal


DRFTWHORE
12-04-2012, 07:17 PM
93 bmw 325is
was automatic but converted to 5-speed
109xxx original miles
clean title


Im testing waters on my bimmer, really looking for a s14 or a very nice s13, really trying to get back into a s-chassis, just got the car running, fresh clutch ready to go and most importantly its ready for BOOST. Same setups with gt35r turbo w/tunes making 500+hp safely, these motors are awesome and have a lot of potential. I have all the receipts for everything i have done to the car.

Motor:

I blew up the stock 2.5 and ditched it, picked up a 2.8 m52 motor from a 96 328i converted back to obd1.

Motor was rebuilt at FMS in pasadena, they deal with european cars all day and trust his work, dealt with him in the past and nothing but great service and awesome work. Block was completely taken apart, honed, cleaned, and surfaced, the crank has been cleaned and polished, following all the new bearings installed. The head received a pressure check, valve job and got resurfaced, new valve seals, and cleaned.

parts list for the motor/tranny:

-Ireland Engineering M52 Race Main bearings
-Irelnad Engineering M52 Race Rod bearings
-Ireland Engineering M52 Piston rings
-ARP head bolt set
-Vac Motorsports custom metal headgasket (84x120) stock bore size .120'' thick lowers the compression from 10.5 to about 9.0.1 perfect for boost.
-pretty much all the seals/gaskets/belts/waterpump/tstat are brand new.
-custom 6-puck unsprung clutch from clutchnet (dual mass flywheels have springs in it hence no need for it on the disc)
-resurfaced dual mass flywheel.
-16'' fan with on/off switch in cabin
-brand new o.e clutch master
-brand new o.e clutch slave

Suspension/wheels/diff

Megan racing euro spec coilovers
Megan racing rear camber arms
Derlin racing front control arm bushings
all control arm ball joints are brand new
brand new inner & outer tie rods
17x9 manaray mesh wheels
235/40/17 sunny tires brand new
245/40/17 continental tires 80% thread
full race stud conversion front and rear 90mm
front have 20mm spacers rears have 5mm
m3 diff

Exterior:

m3 front bumper with lip
euro taillights
dj auto front Glass headlights
4300k hyper white hid low beams
3000k yellow high beams

Interior:

NRG short hub
NRG purple quick release
Nardi Classic wheels
pioneer headunit with speakers
seats show its age
no headliner

deff needs a couple of small things to finish it (m3 seats or bucket seats, headliner, small little things i didnt get to finish) again really looking to get back into a s-chassis, leaning more to an s14, or a really nice s13, if i had to put a price on it i would deff say $8500firm, but again mostly looking for a trade. Will post up more pics tomarrow.

http://farm9.staticflickr.com/8200/8245282959_2be50ba265_z.jpg
http://farm9.staticflickr.com/8340/8245283337_97e621547d_z.jpg
http://farm9.staticflickr.com/8059/8246363332_39e76d3876_z.jpg
http://farm9.staticflickr.com/8070/8246380372_f327bb2fdc_z.jpg
http://farm9.staticflickr.com/8337/8246363584_f425777de7_z.jpg
http://farm9.staticflickr.com/8061/8245296971_fe3d1e702e_z.jpg
http://farm9.staticflickr.com/8207/8246364016_0674e444ae_z.jpg
http://farm9.staticflickr.com/8350/8246380122_8314cd8f88_z.jpg
http://farm9.staticflickr.com/8202/8246380506_e4e43510ce_z.jpg

pingree
12-05-2012, 01:45 AM
Bump, seen this outside my house. looks clean :fruit:

DRFTWHORE
12-15-2012, 07:46 PM
Bump, seen this outside my house. looks clean :fruit:

thanks to the top

DRFTWHORE
01-14-2013, 08:04 PM
bump still looking for a trade.