PDA

View Full Version : SR Swap Garage sale!!


240KAT
03-22-2004, 07:30 PM
I'm doing my SR swap..anyone want anything? I also have the radiator, stock fans (manual and electric). Intake, maf, any exhaust pieces, whatever. Just let me know what you want, and I'll send it away..you pay for shipping. My KA won't start, but havent had a chance to see what's wrong. I'll turn the crank to see if it's seized. Tranny has 120k on it, im sure the clutch has been replaced :hsdance:

rfbokle
03-22-2004, 08:37 PM
what kind of intake is it for sohc

240KAT
03-22-2004, 09:13 PM
its just the stock intake with a new paper filter, nothing special.
Everything is out a 91 DOHC w/ HICAS..not like that matters with what im selling, but whatever.

WILDACEX187
03-22-2004, 09:55 PM
i'll take those electric fans. are they dual?

240KAT
03-23-2004, 01:07 PM
its the stock electric fan.
THE ENGINE IS NOT SEIZED, TURNED IT MANUALLY TODAY..KA24DE for sale as well. Also, stock exhaust (every part) and so on. Pretty much if you have anything you want thats a factory part, let me know and im sure i can part with it.

wishihadasilvia
03-23-2004, 06:11 PM
hey drew u wanna sell the hicas to me hahaha

240KAT
03-23-2004, 08:45 PM
ill take my hicas system out in exchange for your audi you rich bastard :drool:

wishihadasilvia
03-24-2004, 04:46 PM
fuck u man im not the one pouring like 15000 in to a SRhicas. haha neway what are u putting in to UR Hicas? just a basic swap or u upgrading the turbo, inter etc....

240KAT
03-24-2004, 08:09 PM
Not 15k, i dont have that much money. Here's the parts list.
-Redtop SR20 front clip w/ 32,000 miles.
-HKS FMIC, SSQV Blow off valve and aluminum hotpipe, 75mm Downpipe, 75mm Super Silent catback, STD Intake.
-Tein Tension rods, Complete Tie rods, and HE Coilovers.
-SVR Front Mount Battery, FAL 2 12" Electric Fans, Koyo Aluminum Radiator, Exedy Stage II clutch kit, Fidenza flywheel, B&M Short throw shifter, Walbro 255lph fuel pump.
-GReddy Profec-B Electronic Boost Controller, oil pressure and boost gauges, Turbo Timer SpecII and turbo extension.
All that with the factory limited slip and some stick tires should ruin some pretty quick cars in the area. s14 seats are next, my s13 seats are so ratty, torn, stained, unsupportive, etc.

wishihadasilvia
03-25-2004, 02:23 PM
nice nice, hey what u buy ur base project cars for? cause i found some guy online whose sellin an 90 s13FB rollin chassis for 400. My dad is all anal about gettin it casue he says theyll be around later and u dont have the time now. I replied that rollin chassis are not rare but harder to find cause people always get them for swaps, plus for a car with no rust clean Title and one dent on the quater panel i thought was a good price even to just have for whenever i get around to setting up my drfit machine.

mistaanime
03-25-2004, 04:17 PM
hey i want that ka24de maf...how much??

chineseb0i
03-25-2004, 05:06 PM
was wondering if you have the bumper support from the clip. I need the 4 bolts that hold it up..since ur doing a swap ur already have ur bumper support from ur stock 240. when you throw away the clip, could u possibly take off the 4 bolts? i need them cuz i lost mine..i had to cut my bumper support to fit my front mount intercooler on my sr and lost my bolts. Let me know how much for the bolts. 94903

Solo

8kred
03-25-2004, 06:05 PM
need a working vehicle speed sensor. let me know if you have one for grabs.

240KAT
03-25-2004, 08:27 PM
mistaanime: just shoot me an offer. Its on my workbench right now.
chineseb0i: I dont know about the condition of it yet. I get my clip next weekend, if you can, send me a pic of what exactly you're looking for.
8kred: I'll grab the one out of my KA Tranny if thats alright, make me an offer.
wishihadasilvia: since you're doing the swap yourself, shoot for a 91-93, they already have all the power steering lines that the 90 doesnt. (The 89-90 had a seperate belt for the p.s. pump).

wishihadasilvia
03-25-2004, 08:59 PM
The q was what did u pay for ur jimmy? i know about the pump and Tach replacement tec... for the 90's but i wanted to know a price see casue im working on a near 0 budget. I mean eric paid 2200 for his 92 but he paid 2200 for an engine etc thats going in a dump so if i can find a chassis no waste right? so 90 chassis 400$ good?

240KAT
03-26-2004, 08:42 AM
if its a 5spd, rust free, and looks decent enough, sure. Also make sure about brakes..with a near zero budget, it doesnt matter how fast you go if you can't stop..with that said, im running stock brakes. Lol, I may take the rotors off my clip since theyre a tad bigger.
And above all else, get a coupe, eric and i already have hatches..there's only one sr'd coupe in the area, and its a heap.