Anybody running a RS-Enthalpy ECU Tune for SR20DET?

[7Degrees]

Anybody running a RS-Enthalpy ECU Tune for SR20DET? Interested in your opinions on it. I am in the process of swapping a S13 SR20DET into my Lotus 7 kit car. My engine has ISIS stock replacement Turbo. I plan to run 550 injectors a Z32 MAF. Short of that everything will be pretty much stock save for a 3" down pipe and exhaust.

http://i155.photobucket.com/albums/s309/IMACHU2/LOTUS%207/2012-09-30073956.jpg

http://i155.photobucket.com/albums/s309/IMACHU2/LOTUS%207/034-1.jpg

[brndck]

enthalpy, and rom tunes in general, are usually pretty ok, but not nearly as accurate as dyno tuning with a stand-alone. i've personally used a number of "reflashed" ecus (mines, central-20, etc) with excellent results, but the tune is usually a bit rich.
a reflash ecu, + wideband o2 sensor +s-afc will usually get you pretty solid results, but again, not as good as a full standalone.

[fliprayzin240sx]

^^^This was exactly what i did with mine. Piggybacked SAFC to fine tune the fuel map. I was seeing 10s for my AFR under full boost on a GT2871R and 740cc injectors. Leaned it out some to 11s and got more gas mileage out of it.

[ditchs14]

yeah.im running one right now but on a KA....mine runs rich but its safe..i have a buddy that runs one on his SR but he lives in FL so martin tuned his on the dyno. he's a really nice guy. if you dont like the tune and you can log your afr's he can go off that and try to make it better