WTB: 95/96 J30 6 bolt vlsd...

[97nismo]

I freakin cant find one anywhere.....need it shipped to 29678 or 30205
which ever is cheaper....i can meet meet north of atlanta

must go in my 98 s14 non abs

404-644-0927

call text pm...whatever just need one

brad

[97nismo]

Bump.......

[r33silvia]

pm and txt sent

[KiLLeR2001]

Brad, if you direct bolt up the J30 VLSD you will need an ABS driveshaft.

[ShadowDrifter]

you do not need the abs driveshaft there is less then half an inch difference either drive shaft will work, and yes I can prove this.

[ShadowDrifter]

but if your looking for a J30 diff I have one with 5bolt and axles too text me if you want it 570-241-2027

[KiLLeR2001]

Correction, if you want to half ass it, continue to use the improper driveshaft with a J30 VLSD. I'm sure Nissan made different driveshafts for no reason at all. Right?


S14:
Section 1: Coming From Trans (ABS makes no Diff. in Length here)
M/T = 421.0mm (16.57")
A/T = 441.0mm (17.37")

Section 2: Center Bearing/Mount to Diff
Non-ABS = 650.0mm (25.59")
ABS = 636.0mm (25.04")

[ShadowDrifter]

it works just fine i just took a j30 diff out of my 13 and had the stock manual DS in it with no problems at all for the last 2 years just becasue they have mesurements doesn't mean its always right im telling you I know for a FACT it works just fine

[ghoti]

it works just fine i just took a j30 diff out of my 13 and had the stock manual DS in it with no problems at all for the last 2 years just becasue they have mesurements doesn't mean its always right im telling you I know for a FACT it works just fine

I don't thinks he is saying it won't "fit" of course it does. It will be a tight fit how do I know? Because I have done it, the thing is that you need the proper drive shaft since there has to be slack. Using the Non-ABS driveshaft can destroy the Transmissions rear mail seal and it will cause a leak.

So using a Non-ABS DS instead of ABS DS = Half-assing it

[97nismo]

still looking

[97nismo]

still looking......bump